Find an experienced builder in East Brisbane

Need a quote to widen hallway by 30cm. Space will be taken from laundry, which is 2.4m wide x 2m long x 2.4m high. I'm told it is not load bearing. Check detail in photos. I have the vinyl floor tiles to replace the removed ceramic tiles from laundry, but you'll need to try and save the cornice and skirting as I can't match these profiles. No need to change sliding doors to linen cupboard, 1 will just slide up a bit further. I'll arrange for electrician to move light switch. New plasterboard only needs to be ready for painting, I'll engage the painter separately. Needs to be done urgently, so need a fixed timeline of your availability to start and finish. Happy for work to be done on weekends as well. Must be licensed.

Hello, We are building a small pergola in our backyard but I’m struggling to level tje ground where the posts should go. I have all the woods and tools. I laid down concrete last week but all four corners are definitively not level with each other. I have all brackets to connect all 8 pieces of wood for the frame. I’m looking for someone to level the new concrete corners and set up the frame with the 8 pieces of wood for the pergola. It’s gonna be 2m x 3.6m. We might need to cut the 2m lengths since they are coming in 3,6m. I can help of course

Base already has road base and will need some earth removed. Very good access. 140m2 of plain concrete

To safely support a 40-ton moving truck, a concrete slab should be : At least 25 cm (10 inches) thick Use high-strength concrete (≥38 MPa / 4500 psi) Built on a well-compacted gravel base Include reinforcement (rebar or steel mesh) Job is : . Please give a quote 1. Prepare and do 7 meter by 3 meter driveway and footing for 7 meter sliding gate ( along with installing the gate posts) . Mesh and concrete and skills will be included. 2. Prepare and do 5 meter footing for 5 meter sliding gate ( along with installing the gate posts) . Mesh and concrete and skills will be included. 3. Prepare and do 4 meter by 4 meter water tank base . Mesh , concrete and skills will be included

Demolition of deck and subframe that is rotted and cart rubbish to tip Approx 2.5 x 3.5 metres

Assembly of an "Easyshed" slimline, 2.25 long x 1.5 wide.

Revert the existing media room (originally a pergola) back to its original open pergola structure. Scope of work includes: Demolition: Remove non-structural walls and finishes. Door Relocation: Reposition the existing door frame to the original pergola place. Electrical Work: Disconnect and safely remove or relocate wiring as needed. Restoration: Reinstate the pergola’s open-air structure while ensuring structural integrity.

I’m looking for a reliable and enthusiastic worker to apply PVC decking for my backyard patio about 30 square metres big. I will provide the decking material, I just need installation only. ASAP

Need shed assembled on a concrete slab that’s already in place. Redland Bay

Please give me a quote to do the concrete for the two pics as below. I write the size in yellow. One is to extend the driveway and one is cross the fence. Thanks!

Same as job done in December - View all the details of this offer: https://www.airtasker.com/offers/01JXVPJNH92QXPTGYK9H8GQ0JE

Assembly of garden shed on completed paver base.

Assemble a garden shed with dimensions 3x2.26 meters. It is flat-packed and requires tools for assembly. A concrete base is provided for installation. There are no walls or obstacles restricting access to the shed location. No electrical work is needed. All materials are in new condition. Waste packaging and materials will not need to be removed after assembly. Assembly timing is flexible, can be weekdays or weekends.

Wanting a similar design installed to one wall in the lounge area. Would like a design similar to the picture and excluding the cabinetry that has been crossed out. Mainly after the cladding and feature part behind the tv (preferably not marble as featured in the picture) I have also added a picture of our current wall.

Build a stud wall against an existing wall in a commercial building fit gyprock to complete the wall. Wall size 133m2. Gyprock to be 13mm soundcheck Little Buddies QLD

I need a 3.9mtr x 3mtr galvanised steel cat enclosure built (2sides, roof, 1 side open - attached to building, 1 side with a gate)

Install a gravel driveway with edger 3.5m x 5m Can be completed either on 31st May or 1st June

Small set of 5 drawers. I have all the parts and screws, bolts etc. Wanting it put together today. It's a small set - height is only 64 cm high. Simple straightforward task. Price is firm.

To build a wooden patio attached to the back of the house. It should have a colour bond corrugated room and the size is 2.5m wide x 9.0m long.

Garden shed from easy sheds. Have done the sides and roof just need a hand to put the rest together.