Find experienced auto electricians in VIC

Old ignition ruined and need removed and new ignition installed. Need van running but possible flat battery.. also need new key. And some replacement fuses for centre console and interior lights. I have the replacement ignition but no wiring harness. can provide photos.

2002 Hiace SBV. Needs Various repairs and a service Replacement Ignition installation. New key with central locking needed. Various electrics and lights (fuses) and a roadworthy estimate

need someone to install reverse camera installation. camera and kits available just need some one to installed

Audi Q7 not starting as it shows put gear in P or N to start. We have replaced the Automatic Transmission Neutral Safety Switch but error still coming. Also shows a coil error display in screen and shows a message that Start / Stop feature not available.

Audi Q7 has starting problem, it shows put the dear in P or N to start. We have replaced the Neutral Switch but the error still comes up. Also, shows aa coil error in display screen, and shows Start / Stop function failure.

Installation two child seats in camry

Install U9 nudge bar with LED Light bar and UHF RADIO

Require an auto electrician to remove a set of driving lights and reinstall onto another vehicle. From Ford Everest into a Ford Ranger.

Had a cheap after market installed that is rubbish. Want that removed and replaced in my 2015 Mitsubishi ASX. Want a Wireless unit with reverse camera (will buy).

To install my dash cam hard wired

I have a 2008 Mazda 6 and bought a wireless CarPlay head unit with a reverse camera. Need to install it the reverse camera as the head unit is plug and play in to the 12v output, no need to take off the dashboard . Just need the reverse camera installed properly.

Ring camera purchased. All parts available. Need drilled into brick to install the camera mount. This is a battery powered camera not wired.

Hardwired dashcam installation

I have a 2007 Kia Rio (JB shape) with minor front-end damage after a low-speed incident. Looking for someone experienced (mechanic / panel beater / handy person) to do a cheap, practical repair — not a full cosmetic job. What needs doing: Replace or repair bonnet (I may supply part OR happy for you to source from wreckers) Re-align front bumper (currently popped/misaligned) Secure/re-seat passenger side headlight (may have broken clips) General tidy-up so everything lines up and is safe Important: This is NOT an insurance job or full respray I’m not looking for perfect — just safe and presentable Car has ~300,000km so keeping costs low is the priority Location:Greensborough Budget:Open to offers – looking for a reasonable cash-style job Extras (optional): If you can source parts (especially bonnet in red), please mention If you have experience with similar repairs, let me know Photos attached Looking for someone who knows what they’re doing and can get it sorted without overcomplicating it.

Description: Looking for someone experienced with 4WD electrical installs (auto electrician or experienced installer preferred) to assist with fitting a KickAss 12V 120Ah Slimline Lithium Premium Dual Battery Kit into my GWM Tank 300. The KickAss kit is designed as a plug-and-play system and comes with everything required, but I’d really value input from someone experienced to ensure the layout, mounting, and overall finish is done properly. I’ve already started planning the layout and identified the best location for the battery in the rear cargo area. I’m after someone who can help refine the setup and carry out a clean, professional install. Scope of work: • Assist with final layout/positioning of battery and components • Securely mount the slimline lithium battery in the cargo area • Drill into the floor and install rivnuts/nutserts for solid mounting points • Modify/reposition the factory subwoofer/amp so it doesn’t foul on the battery • Re-secure sub/amp once repositioned • Assist with cable routing and cable management (safe, neat, and protected) • Ensure safe clearance around battery terminals and cabling • General tidy-up to ensure nothing rubs, vibrates, or creates a hazard What’s included in the kit: • 120Ah Slimline Lithium Battery • 25A DCDC Charger • Wiring kit (incl. cabling, fuses, connectors) • Mounting hardware (from kit) Requirements: • Must have experience with dual battery / 12V setups • Must have own tools, including rivnut/nutsert tool • Experience working on 4WDs or custom installs highly preferred • Ability to deliver a clean, safe, and well-finished install Notes: • Space is tight due to factory bolts underneath, so experience with custom installs is important • After a properly thought-out setup, not just a quick install • Happy to assist on the day if needed Location: Preston VIC Timing: Flexible (sooner preferred)

Need my head unit installed in my car. I have purchased My car is a Hyundai i20 2013

Hi I’m looking for someone that can properly assemble my son‘s brand-new electric car. I had someone from Airtasker come and assemble it for me yesterday but I think they were thinking that it needed to be fully charged before anything would work. It’s been almost 24 hours since I’ve had it done and it doesn’t work. I press the start button and a couple of lights flash but then it goes off again. I’ve tried using the parental remote and I’ve also tried using it manually. I think the wiring that’s inside was done incorrectly.

2017 landcruiser prado Purchased the car recently Has kings spotlights installed I cant find switch to turn them on. Need auto electrician to diagnose and potentially fix Please quote

Hello I just received my sons Easter Present, I know it’s not chocolate but I’d prefer this. I attempted to try and do it myself but I don’t want to do anything else, my son has autism and he use to have one about 2 years ago and he LOVED it, this will 100% help him when he him having meltdowns, I’m also on a disability pension so hopefully someone would be kind enough to assemble this tother of me

Need a 2-channel dashcam (70mai A800SE) hardwired into my brand new 2025 Mazda 3 G20 hatch. The job: • Front camera mounted behind rear-view mirror • Rear camera on rear windscreen, cable routed through headliner • 70mai UP03 Type-C hardwire kit connected to fuse box with low-voltage cutoff for parking mode • All cables fully hidden through trim, A-pillar, and door seals • Test both cameras, parking mode, and GPS before finishing I provide the dashcam, hardwire kit, and SD card. You bring trim tools and a multimeter. Car is BRAND NEW — extra care required. No drilling or cutting. Cables through existing trim gaps only. Please tell me: • How many dashcam installs you’ve done • Experience with Mazda 3 or similar late-model cars • Photos of previous clean installs if possible Location: Hawthorn VIC 3122 (off-street parking) Availability: Weekends preferred, weekday evenings also fine Estimated time: 1–1.5 hours