Find a professional paving contractor in Preston VIC

Need stone pavers removed from property. It is an old DIY job from previous owners so the stone can be easily lifted from soil. The space is around 6m by 2.5m. Would prefer if skip isn’t required as driveway is shared

I need a a path constructed approx 3.8 metres in length using 400 x 400 cement pavers. Please note all materials will be supplied by myself including pavers , sand , crushed rock. This is a labour for construction of path job. Material supplied by home owner. I need a path from Shed area to grass area. 3.8 metres.This would involve digging out dirt, construction of base and laying of pavers. Excess dirt can be left on site.

I want to pave a small 2.5m x 4m area in my back yard with a paver similar to what I’ve attached in the photos. We will move the shed up onto the deck so you can pave underneath. Will need to cut pavers around the washing line that’s concreted in. I would like the pavers installed on a sand and cement mix.

Some of the bricks in a particular section have lifted up due to a tree root lifting it up. Area around 1metre x 1 metre Bricks need to be lifted - whilst tree root pieces removed and bricks relaid back into position and evenly

A section of brick paving has lifted and also dropped which is next to the fence

Have decorative stones on side of the house that need removing and paving to be laid either cement or bluestone

Paving courtyard 5x 5 I will provide pavers and all materials just not tool. I am not a professional so you must have all tools necessary. I want a professional looking finish. Thank you

Remove existing decorative stones etc and level out and do some paving----I have about 30 bluestone pavers to be used and to complete the task more would be required. It is not a high traffic area so may not need any cement but only sand ??

Paving courtyard, 4x4 on concrete

Tiling needed for 2 paths in front yard of house. 1 bluestone stepping stones and another bluestone crazy paving

We need a small path (approx. 4.5 m2) which is on a slight incline to be concreted and tiled/grouted/sealed. We will also need a raised garden bed (refer to picture with plan) to include sleepers. We have existing 1000x500mm bluestone tiles available and grout.

Paving required to area (32m2) with existing concrete pavers, 755x375x40mm. Area previously had pavers installed with crush rock and sand. Have been removed, as it need to be redone.

I'm requiring 3 small areas (total approx 10m2) of recycled brick paving. Application must be thorough so no weeds grow through. I'm open to suggestions for patterns and design.

Cut top off 5 cypress trees and trim sides. Cypress are 2m . Cut to 1.5m Move 30 pieces of pavers

Secure two bluestone pavers (600*300mm each) to front step. Pavers supplied. Other materials at repairer’s expense

Ceramic edge paving to an asphalt house path have broken and need to be removed and replaced. - Due date: Flexible

I would like paving stones to be installed in the garden, we currently have timber sleepers in lilydale topping but they have warped, I would like to replace the sleepers with bluestone stepping stones surrounded by planting - Due date: Flexible

We need 6 paver dug in grass level. The pavers are 400x400 and 40mm deep - Due date: Flexible

I would like the concrete pool base cut into approx 400 x 400mm squares and piled to the rear of backyard. The concrete appears to be 10cm thick. It’s roughly 11m x 3.5m in size. Located in preston - Due date: Flexible

16 paving slabs to be laid, we have stones there at the moment so may need some necessary ground work. - Due date: Flexible