Find a professional kitchen renovation contractor in WA

Plumer request to do gas line, tap, drain, connector dishwasher machine

kitchen installation. need to be done asap. this is not whole kitchen just one side base cabinets only.

I have a very old oven that needs to be removed prior to starting a kitchen renovation. It's hardwired, whereas the new oven is a standard 3-pin plug. I require the following jobs to be completed: - Remove old oven/sort the old wiring. - Install new power point for the new oven. - Move another power point so it meets WA regulations regarding distance from cooktop. - Rescue my hardwired smoke alarm from the roof cavity (or install a new one).

Install small kaboodle kitchen, small laundry cabinets and wall cabinets

Installing cupboards and a new kaboodle kitchen

IKEA kitchen installation. Would require removal of old kitchen Budget: Kitchen assembly and installation - $2500 Removal of old kitchen - $500

Put together and install kitchen wall cabinets, including 1 x rangehood and install 1 x powerpoint. 3 x ikea wall cabinets The rangehood is built-in to one of the cabinets I have an ikea kitchen planner in pdf which i can supply to show exact measurements and what i have ordered.

Kitchen cupboards and cabinets assemble need finishing along with timber bench top

I need many changes in my kitchen. Removing old stove. New bench. Most things need to go.

Kitchen installation. already purchased and cubboard being put together

Kitchen Renovation Assistance – Accommodation Included – Jurien Bay WA Looking for an experienced carpenter / cabinet installer / skilled handyman to assist with renovating a classic 1950’s weatherboard home in Jurien Bay. Work is ready to begin immediately with demolition and preparation works starting now. New flat-pack kitchen is due to arrive in approximately 7 business days. Scope of Works: • Demolition and removal of existing kitchen • Removal of one non-structural wall • Gyprock/plaster patching to walls and ceiling • Prep work ready for cabinetry install • Assembly and installation of flat-pack kitchen • Installation of tiled splashback once kitchen is completed • General carpentry and finishing work The home is an older 1950’s weatherboard house, so experience working on older homes and problem-solving on the go would be highly valued. Accommodation / Site Access: • Plenty of room for vanlife travellers, caravans or swag setups • Access to basic services/utilities available onsite Requirements: • Preferably BYO tools • Can supply tools if needed • Experience with cabinetry/carpentry/renovations preferred • Tiling experience a bonus • Able to work independently and neatly • White Card preferred Supplied: • Kitchen cabinetry • Materials • Accommodation/site access • Labour assistance if required One-off renovation project only, however there may be additional renovation work afterwards for the right person. Please send: • Brief background/experience • Photos of previous work • Availability • Expected hourly/day rate • What tools you have available Serious applicants only.

Knock down current kitchen cabinets ( all low cabinets and sink) and put up IKEA flat pack in approx . same configuration as old kitchen see photos. For approx new kitchen see https://kitchen.planner.ikea.com/au/en/planner/0486E3CB-3428-43F7-8419-B87E0BA154FA/?ref=share

Cabinet making experience preferred or a bloody good handy man. I brought a large kitchen from a friend and need parts of it installed into my smaller sort of empty, kitchen space. No flat packs etc, a bit like putting cupboards and over heads where things will fit .

Install kitchen Bunnings kaboodle

Ikea flat pack to be assembled and all cupboards including overheads installed with appropriate cut outs for plumbing, gas and electrical services accomodated.

Looking for an experienced installer or cabinet maker to assemble and install a Kaboodle kitchen from Bunnings. I have full plans and item list ready to send. Kitchen details: - U-shaped kitchen with breakfast bar/island - Includes 450mm pantry, blind corner cabinet, oven cabinet, and overheads - Laminate benchtops (cutting required on site) - Sink and cooktop cut-outs required - Island with back panel (seating side) Scope of work: - Assemble and install all Kaboodle cabinets - Install pantry (450mm) and blind corner cabinet (incl. correct offset) - Install wall cabinets and rangehood cabinet - Cut and install benchtops (laminate, on-site joins) - Cut-outs for sink and cooktop - Install kickboards, fillers and end panels - Install island back panel and ensure seating overhang is finished properly - Adjust cabinetry to suit inset window (lowering cabinets + trimming as needed) Important notes from plan: - Window height requires cabinets to be lowered and trimmed on site - Kickboards and panels need cutting to suit - Filler panels and gaps to be adjusted by installer - Dishwasher void to be braced - Some walls/areas may not be perfectly square Location: Hocking, WA Timing: Flexible (ready to proceed soon) Please include: - Experience with Kaboodle kitchens - Quote (labour only) - Availability - Photos of similar installs Happy to send full plans before quoting.

Kitchen equipment already bought just need to be installed

MODULES FOR QUOTE Cabinetry draws + fronts Kitchen and bathroom bench tops Kitchen island + back wall, laundry + bathroom side shelf install wall shelving kitchen back wall **see diagram for kitchen measurements Flooring Side room reflooring Using 1200 x 2400 marine ply flooring panels (12mm thick) over 9mm MDF panels, on top of old jarrah floor boards to make level with main room flooring **see side room flooring diagram Entrance side panel Using same marine ply panel to span area approx 3000 x 220 NOTE: we will coat the marine ply with hard wax oils (same product as main room) Bulkhead and plastering bulkhead build in kitchen 10mm plasterboard + metal studs supplied 300 high, 730 deep, 2600 wide bulkhead attached to side walls plastering patches (large in walk in wardrobe, several tiny ones) **see kitchen diagram Skirting approximately 63m of skirting screwed into metal stud work and caulked. upstairs = 30m of 18mmx42mm square dressed downstairs = 33m of 36mm x 90mm stepped square dressed **see skirting floor plan diagram Tiling Kitchen backsplash 1.8m x 0.7m, using 10cm square tiles (supplied in 30cm2 mosaics of 3x3) Laundry entrance 0.8m x 0.3, using 10cm square tiles (supplied in 30cm2 mosaics of 3x3) + tile trim + bevelled wood entrance trim Door handle install lockable door handle in storage room door NOTE: All materials supplied and required tools also available onsite if needed

Small kaboodle kitchen with lower cabinets plus three IKEA upper cabinets. The kaboodle kitchen is 5 cabinets (2 with four draws each) and benchtops/sink which need to be installed. There is also a rangehood to install. The kitchen has arrived and we need to let Bunnings know when we want it delivered by which will be determined by availability to do the task. We have three IKEA upper cabinets which we have the mounting bracket for, and we have doors and hinges/door handles. There is also a filler section to make it symmetrical around the rangehood. We also have a microwave which we want mounted on the wall. We will provide the brackets We also need some plumbing and electrics done which we think needs to be done before installation - if that correct? If so, I have a plumber who can set things up for our small draw dishwasher and perhaps deal with the existing gas line for the gas oven. But I need to find an electrician which I don't think will be too difficult Finally, we have two old bottom cabinets that we are currently using (one holds the current sink) and that need to be removed). It would be great to get your thoughts about the stages, the process, and your potential timeline for this work. Please advise us on what you are able to manage from this description.

My husband runs a cabinet maker business and need a helper for tomorrow at 8 am till 3 pm. Experienced with ikea installation, it’s already all assembled. Potentially more jobs for future if your experience is good enough. Price published by hour.