Find a local Tasker to help you make a kitchen cabinet in North Brisbane

Looking for a cabinet maker, joiner or carpenter to modify an existing solid timber kitchen in Kedron. The kitchen is being retained and will be professionally painted afterward, with new stone benchtops installed once the cabinetry is complete. Scope includes: * create a 600 mm dishwasher opening in the existing right-hand base cabinet area * extend/adjust the existing top support rail as required * fit a narrow side/end support beside the dishwasher where required to support the new stone benchtop * modify the existing oven tower/opening to suit a new 600 mm built-in oven * build and fit a new shelf directly above the oven, with a neat finished front edge * join the two separate hutch/base units together so they form one straight, rigid run for a continuous stone benchtop * remove existing timber benchtops as required to complete and level the cabinetry, then temporarily sit them back in place afterward * leave the cabinetry ready for professional painting and final stone templating The existing cabinetry is solid timber and I want to retain as much of it as possible rather than rebuild the kitchen. Minor materials can be included. Pine/plywood is fine for new concealed/support pieces where appropriate. Weekend work is also fine if that suits your availability. Budget is a guide only and I’m happy to discuss the scope before assigning.

I need an experienced cabinetmaker to modify an existing kitchen appliance cavity to accommodate an ASKO OCM8487A 45cm compact combi-microwave oven. The oven is currently a few millimetres too large for the existing cavity, so I need the cabinetry professionally modified to achieve the correct manufacturer-required dimensions and a clean, built-in finish. Scope: Assess existing cavity and oven dimensions. Determine the best solution (e.g. carefully widening/adjusting the cavity or modifying internal cabinetry). Modify cabinetry as required. Ensure the oven is correctly supported, aligned and has the required ventilation/clearances. Finish neatly to match the existing kitchen. Oven is already purchased and available on site. Photos of the existing cavity attached with an au generated photo with the purchased oven showing what we are wanting the end outcome to be. Looking for: Experienced kitchen cabinetmaker familiar with integrated ovens. Ideally someone who can inspect, recommend the best solution and complete the modification in one job.

- Looking for an experienced cabinet maker/carpenter to build and install a custom kitchen cabinet for empty space. Please see attached photos of what is current and what I am needing to achieve. - Size: W60 x H89 cm, Depth 58 cm - 2x open shelving space - 1x drawer with soft-close hinges and drawer runners - Do not need to supply cabinet handles. Please include in the quote: - supply of materials - labour and installation - Availability and estimated lead time Thank you

Assembly & Install of 6 x upper kitchen cabinets purchased from IKEA. (No bench top, lower cabinets or appliances) Need: mounting of doors, shelves, legs, hinges and handles. Installation of the kitchen cabinet to the wall, Fixing of Kickboards (that don't require cutting) Installation of Filler Panel - cut & install Installation of Cover Panels - (that require cutting)

New oven has been installed so we need the drawer underneath and runners to be cut smaller to fit underneath for the trays. Still have original drawer and runners to be moved. Smaller drawer from bench fits under for size comparison in the pictures attached.

I would like to move the cabinet upwards to make room for my fridge to fit in the space

Hi I need to do a new cabinet for my kitchen, with removal of the old kitchen and installation . * Bench along the wall to the end: 2.8 m long * Depth: from 60 cm to 1.10 m * Cooktop wall: * Height: 2.08 m * Depth: 60–65 cm * Length: 2 m I like to do all white with top bench as well white.

Looking for someone to cut approx 1.5 cm of the kitchen cabinet so I can fit in my fridge.

There are multiple (6-10) hinges on our kitchen cabinets that are old and letting the cabinet doors hang. They need to be replaced. - 4 corner cabinet 2-door hinges, including an additional 4 hinges that hold the second door of the corner - 2 draw hinges - 4 normal single door hinges

We’re fitting out a new commercial salon and need 3 capable people to assemble and install a full IKEA kitchen cabinetry system. This is not a small flat-pack job — it’s a large, continuous run of cabinets forming part of a professional workspace. We need people who already understand IKEA systems (Metod/rail mounting, levelling, fillers, panels, hinges, drawers etc.) and can work efficiently without constant direction. Scope: • Assemble cabinet carcasses, drawers and doors • Mount suspension rails to masonry/gyprock walls • Level and secure cabinets • Install end panels, fillers and kickboards • Align doors and soft-close hardware cleanly You don’t need to be a licensed builder, but you must be competent with tools, measuring, fixing into studs/masonry and working neatly in a commercial environment. We will have plans, layout, hardware and fixings onsite. Ideal if you: • Have previously installed IKEA kitchens • Own your own basic tools (drivers, levels, drill/impact, bits) • Work fast and methodically • Can problem-solve on site Location: Nundah Duration: 1 full day (potential for extra work) Pay: $1,000 total paid same/next day We’re trying to get this done properly and efficiently — reliability and experience matter more than anything. Please message with: – your experience with IKEA kitchens – number of people you can bring – when you’re available

We have fridge arriving today and won’t fit in cabinet. We have removed all pieces just need someone to cut or pull out (as I’m not strong enough) the top cupboard and put screws back in. See pic. Need done urgently today.

Looking for a cabinet installer to complete installation of flat pack (Kaboodle) kitchen base cabinets (these have been assembled already, and need leveling and fixing to the wall), plus installation of 1x overhead cabinet, wine rack, filler panels, kick panels (supplied) and corner pantry cabinet.

I have an above-fridge laminate cabinet, not fixed to the wall, that needs 80 mm removed from the height so the fridge fits underneath. I want it shortened from the top, including re-edging and door adjustment.

Seeking a professional to update our kitchen cabinet doors and drawer fronts by applying a white laminate finish over the existing surfaces. The work should include installing new door handles. (including materials, labor)

Task for handyman/carpenter/apprentice To reaize this long cabinet to reclaim more slab space back for use. Happy to give a hand if needed Flexible with day and time

I’m looking for an experienced installer/cabinetmaker/tradie to help with the following: - Remove and dispose of old freestanding dishwasher (EURO Valencia, 60 cm). - Install new fully integrated dishwasher (Bosch SMV6HCX01A). - Measure, source, and fit a custom cabinet door panel (to match existing kitchen cabinetry — Laminex Polar White / Natural Finish), including installation and adjustment. (the panel is paid for by me) - Ensure dishwasher door operates correctly and sits flush with adjacent cabinetry. Requirements: ✅ Must have experience with fully integrated dishwashers and matching cabinetry. ✅ Must be able to measure, order, and fit the panel (or work with a cabinetmaker). ✅ Must be able to dispose of old dishwasher and packaging. Budget: $300

Replace the old kitchen cabinet doors with new ones. Replace the kitchen cabinet with a new one.

Revamping kitchen - painting, new handles, new counter tops. Need someone to paint Galley style wooden kitchen with high kickboards. 4 tall pantry cupboard doors, 14 normal size doors, 5 large drawers and 4 small drawers, plus rangehood.

Looking for someone who can cut and Install Filler piece above oven

We have an open kitchen cabinet measuring 49 cm deep, 74cm high, 60cm wide (photos attached). We need help to install an opaque glass door something like shown in the link https://au.pinterest.com/pin/108227197265087128/. Also need to put in a wooden board/ plank horizontally in the middle to split the cabinet into 2 sections. Please feel free to seek further clarifications, if required, to make a proposal. Will pay for the materials over and above the labor charge.