Find a local glass fencing contractor in East Brisbane

We require pool fencing glass panel to be cut into half to all for a 160mm gap and reinstalled as per red marking on the attached picture . So a carport can be installed Pool fencing will need new frame less mounts x 2 to cater for the new changes

A single glass panel and one support post were removed during other construstion and now need to be put back The glass panel needs to be reduced in width and the support post needs to be mounted again

New pool fence to be installed would like some glass panels and then white aluminium around the pool. Pool is 6x4 with two tiles 400x400 then concrete. Would also like to need a gate and the pool to earthed on fencing.

Needing someone experienced with glass pool fencing to fix the alignment and spacing of our panels. The fence is about 9x5. A few panels need re levelling so the gaps are even and compliant. The gate also needs adjusting, the top is crooked and it isn’t lining up properly, so it needs to be levelled and re set so it closes smoothly and latches correctly. All panels and hardware are already installed, just require adjustments. Please bring the right tools for spigot and hinge adjustments. Hoping to have it done this week.

Have 4 wooden fence poles that need replacing for a pool area. The existing metal fence sections would be reused.

Seeking a quote for glass pool fence alignment correction and installation of two additional glass panels. Would also benefit from anyone who can certify the fence as well.

Secure 11 glass panels, x1 glass gate over 20m around new concrete pool. Spigots and pool fence on site.

Frameless pool fencing ,

I have an existing pool fence that needs to be reinstalled on the existing spigots. There is also a requirement to install about 10 new spigots onto a new timber deck. This is probably max 1 day of work and maybe less.

I need a quote for a pool fence. materials plus labor

Looking for 16m of glass pool fencing. With a corner L shaped.

Install pool fence and gate.

Pool fence to be installed labour + material 3.6 x 2 which includes a gate which is 91cms

1. Increase height of colorbond pool fence by 200mm over 12.2m. 2. Replace and raise gate latch

Raise height of pool latch release to 1500mm. Raise height of neighbours side colorbond fence from 1400mm to1800mm.

I need about 12m of aluminium pool fencing and a gate installed around a spa.

Existing fence and gate to be reinstalled. Around 9-10 meters of straight aluminium fencing to go in. Happy to answer any questions.

I would like to install a glass pool fence and engineered wood neighbourhood fence, concrete and tile retaining wall. I have a patio and would liked tp extend the concrete floor andctile to the pool retaining wall.

We need a new pool fence installed. We have all the hardwood posts, black aluminum panels (17 of them) screws, and quick set concrete ready to go. You will need to carry out the complete install.

Please see attached photos for what council has said and what needs to be done to make it compliant You can speak with Mandy Daly the Development Control Officer from Redland City Council for questions to ensure compliant Mainly to fix issues for pool compliance: ︎Fix gaps under fence that are more than 100mm. ︎Fix gate so the gate self closes. ︎Add post to end of pool fence and attach it to boundary colourbonde fence. ︎Remove all climbable items away from the pool fence.