Find experienced local fencing contractors in Brighton QLD

Needing someone to install an outdoor bay gate on our back deck please. The baby gate is a ‘perma gate’ brand and the instructions can be found on the website. https://permachildsafety.com.au/products/swing-gate-wall-mounting-kit

Remove existing gate and replace with a timber side fence. Gate is 1.4m width and 1.5m high. Fence needs to be 1.8.

Looking for a carpenter / handyman to come and install timber posts (6-7) and fix prefab 1.8m fence panels in Brighton before Sunday ideally. May need to cut to 1.2m height once installed if looks too tall. 10m length roughly and easy access, can complete job on coming weekend if you need. Would also like some gates installed (can be later).

Replace wood with steel or similar style

We have recently renovated our house and we now need to put the finishing touches. One thing is to build a small 1 m wide side fence between the house and the existing perimeter fence. Please see attached photos for space that it needs to be put in. We just need a simple timber head hi Fence

Install and commission electric gate motor. It’s replacing an old motor so all the hardware is already on the sliding gate and the old motor is removed. Socket already wired to plug into.

Small gate, fencing under the house and pillars laid on the side of the house where my little dog digs out

We have a colorbond style steel fence around our property in a gross kind of pale green. We are wanting to repaint it to a more suitable colour matching the palette of the house. The fence will need a clean before painting and then looking for a good quality finish without overspraying into the neighbours' yards or on to their side of the fence.

We have some rotten posts that need removing, replacing and fence panels attached back onto them

Unfortunately the cyclone has uncovered some dodgy work from a fence/gate install I had done recently. The business that did it has disconnected their phone. I would like to have my mailbox installed correctly and my fence put back together.

11 m butted timber fencing All materials onsite Holes dug for posts We have been let down by another contractor because he is on holidays

Existing side gate (metal frame with wooden palings) has a gap at the bottom to allow it to swing open (slightly sloping land). Unfortunately little dog can squeeze underneath and get out (I have just discovered). Need to dog proof it.

Need to move steel fence post 30cm back and have chain wire fence shorten and reattached. This steel post will have gate attached on both sides as it’s between neighbour yards. In this picture is the post, iron one is the one that needs relocating, wooden post on the right will be gone and gate attached to the remaining one. Let me know if more information is required.

We have a wooden fence between our house and neighbours property. It is starting to lean over due to rotten support posts. We need someone to come out, remove and concrete in new ones and pull the panels back into place

Quite a simple job - mainly labour only. Just need somebody to redirect my pool fence to side of deck - some images attached.

Replacement of the grey piece of timber at the bottom of the front doorway

We have a small dog and would like to close in our front yard with 1.8m high fence (aluminium slats) with a 4m sliding fence (manual).

Hi, We would like some one to install a steel or aluminium fence. Thanks, Clint

I require two gates to be built to these specs: #1 -1 x 3m double gate on driveway -concrete 2 90x90 hardwood posts into either side of the opening at a depth of 600mm - install aluminum gate frame on hinges - screw 66x18mm external primed timber battens to frame install latch and wheel #2 - 1 x 1.1m single gate on landing side concrete 1 90x90 hardwood post @depth of 600mm - install aluminium gate frame on hinges screw 66x18mm external primed timber battens to frame - install catch latch - install horizonal timbers on base of landing to match skirt under house no need to paint/stain please include supply of all materials pictures included of locations of gates and also included reference to design we would like (i.e. to make the timber palings match the size and distance of as illustrated on the front deck) OPEN TO SUGGESTIONS: IE - STEEL POST INSTEAD - Due date: Before Friday, 24 November 2023

Some of the pailings on my fence have come loose. There is also the potential for several other small jobs around the house if interested. - Due date: Flexible