Find a local electronics repairer in St James NSW

Replace the old shower head and tap with new shower head and shower tap. New head and taps providers. Located at Rousehill, need it fixed today

Need a painter to do a few touch ups around the office - minor things like scratches, and then a few skirting boards Location King Street Sydney CBD

Installation of heat lamps. This is for just one.

Lamp holders became loose which resulted in wire breaking Some lamp holders may require screws tightening or replacement At hotel in Darling Harbour Sussex St

Ghd red light flashing not turning on the gold s7N261

Washing Machine, gaskit got tangled. We need to fix it. Thank you

Hi there, I’m looking for someone with experience in electronics or headphone repairs to fix a broken hinge on my Sony WH-1000XM4 headphones (please see photo for reference). ✅ The headphones still work perfectly — they charge, play audio, all buttons and touch controls function as intended. ❌ However, the left hinge is broken, which makes them awkward and uncomfortable to wear. They're basically only usable while lying down in bed right now. I’d like the hinge to be securely repaired or replaced, restoring the headphones to proper wearable condition. You may need to source a compatible hinge part, or repair the existing one - open to your method. Would appreciate someone with: - Experience repairing headphones or similar devices - Access to precision tools for plastic/electronics work - Ability to either fabricate or supply replacement hinge components if needed Drop-off in person is the preference. Fairly flexible with time, but need it done before the 8th of June when I go overseas.

Fell over and broke external casing. Now not charging.

I have a pair of Bose QC35ii headphones (in good condition and fully functional) with a broken plastic hinge that connects the right earcup to the headband and secures the headband cable. As a result, the earcup is loose, hanging by the cable, and can no longer fold or stay in the correct position when worn. The cable runs directly through the broken hinge and is hardwired to a circuit inside the earcup, so it needs to be removed and rerouted through the new hinge. To do this, the earcup must be disassembled, and a few thin enamel-coated wires disconnected and re-soldered. There are plenty of detailed tutorial online - would take 15 minutes for a skilled person.

GHD straighteners no longer heat up properly, I'm not sure what the issue is

I need 3x stone tops for my bar tables cut to size Lenght 1600mm Width 700mm

Scope of work: -Test & tag 5 x extension cables - Rewire 6 x hardwired lights to GPO plug ends - Install LED strip lighting (LEDs provided) on: 4 x Arches 1 x Entry sign 1 x Bar Total LED length: 35m Job Details: Date & Time: Friday, 21st March, 6:30 PM – 9:30 PM Location: Sydney CBD Rate: $90 per hour (Total: $270)

Carpet joints stitches were opened and some tack strips were taken off to fix the flooring. Now this needs to be put back in original position

I'm professional installer of kitchens and various furniture. I offer repair of stone bench tops, chips, cracks. Starting price from 150$.

The activity needs to be done within business hours , after hours, and occasionally on weekends, the ceiling height can go upto 5 meter. The primary task is to mount and unmount Access Points (APs), with additional support for troubleshooting if needed. Engineers must be knowledgeable in AP troubleshooting Work Mode - Onsite The engagement is on Demand (Dispatch services) Please share your charges as per below mentioned table Support Structure Remote engineers will assist on-site engineers. Configuration and cabling are not required, tasks are limited to AP mounting, unmounting, and reconnecting to keyboards

I need a collapsible photo studio background built and installed on a wall. This would be made from a sturdy material in a clean / solid white (e.g. white MDF board) and mounted directly onto a wall. It would consist of 3 boards that collapse on each other and lock into place, either closed against the wall or opened up into a corner. Each board would measure 60cm x 40cm. Please see the attached mockups. When open, the inside should not have any visible drill holes or hinges, the joins should be clean and almost seamless (i.e. there should be no gaps between the boards), and the bottom board should be strong enough to carry the weight of a heavy pair of boots or a handbag (i.e. 3-5 kg in weight). We should be able to lock backdrop open when in use and then also lock it closed (against the wall) when not in use. I've come up with a basic design that you can see in the attached mockups, but I'm open to an alternative design if you come up with something that looks and functions better. You can construct off-site, but I would like you to install it on my wall. Location is a small office on Level 1 of a building in the CBD. A lot of street parking (including 4 loading zones) just outside the building, and fairly quiet during the holidays.

Left trigger has stopped working

I have two bathrooms and I would like to replace taps in both of them. I am going to supply my own taps.

I need someone to repair my WH-1000XM3 Wireless Noise Cancelling Headphones as they have stopped charging and turning on.

I need help assembling a basketball game. You will need basic tools such as a screw driver and a hammer. It is a two hoop Arcade style game. Should not take more than 45mins to assemble According to instructions.