Find a local electrical testing service near you

We run a property buyers agency looking for an electrician who can attend the Build and pest and do a electrical report at the same time. Make sure, lights, fans, oven, stove top, plugs, aircon, electrical box etc is in working order. There will be any way from to 2 - 4 a week to do and will have a 3 - 5 days notice of each job, liaisons with the inspection company. Will to pay $25p a inspection.

I have a few observations from a past inspection, and need a quote for this work. Switchboard testing and verification (incl. RCD/RCBO testing as applicable). 4 RCBO needed as per earlier inspection: Supply and install 10A RCBO – Qty 1 Supply and install 16A RCBO – Qty 3 Supply and replace downlights – Qty 18 Supply and install smoke detector – Qty 1 Exhaust fan (existing working condition): fix wiring in roof, plus insulate only (no fan supply) – Qty 1 Light install (chandelier light) – Qty 1 Chandeliers (existing): for 2 chandeliers, clip/secure wiring in the roof space; add insulation if required – Qty 2 Deliverables: Certificate of electrical safety provided after completion Photos of wiring clipped/secured and maintained in the roof space (for the exhaust fan/chandeliers work)

We’re located in Ormond. Our house is a 1930s weatherboard, renovated in 1990s. Easy access to both below floor and into roof space. Want to check safety of generally wiring and possible disconnection to shed.

Looking for a licensed electrician to do a full electrical inspection of a 3 bed, 1 bath, 1 dining/kitchen, 1 lounge house. Old house so not that many sockets. About one socket and one ceiling light per room. + Relocate a power point 2/3 meter from existing socket. Existing socket is in the skirting board. Please see photo. Please provide quote. Thank you!

We have just installed solar system. Need inspection to complete Coes

Carry out an inspection of the switchboard, checking for correct labelling, RCD protection, and signs of damage. Look for exposed or damaged wiring, broken outlets, or unsafe fittings throughout the property. Confirm that smoke alarms are installed and compliant. Test outlets for polarity and earth, test RCDs and RCBOs for correct trip time, check insulation resistance of circuits, and confirm that lights and fixed appliances operate safely. Check that the installation complies with AS/NZS 3000, that the earthing system is intact, and that there are no signs of overloading or unsafe alterations.

I need an inspection of the air conditioning wiring, lighting circuits, and the solar panel system wiring in my roof space. The primary goal is to check for and mitigate any potential risks such as wire ageing (deterioration) and short circuits. Could you please provide a quotation (quote) for this service and let me know your available dates/times for the inspection?

Please quote for the job: Suspect 20A 3-phase outlet and switch are faulty. Charging is not working. Need a licensed electrician to inspect and quote for repair or replacement.

Rooming house electrical inspection required every two years. Need someone can issue electrical certificates after the inspection

Inspect power box, repair any power outlets and light fixtures, replace all globes and ensure smoke detectors are working

No spark issues replaced stator and spark plug

replacement of old with new smoke alarms .After that full electrical safety inspection report including the new alarms.

Roof top Solar electrical inspector

Electrical inspection and fixing as the safety switch was tripped even when nothing new was plugged in

Qualifications: Must be a licensed electrician in Australia with experience in residential electrical systems and compliance with AS/NZS 3000. Scope of Work: Record the entire inspection process with continuous video (clear audio and visuals) and take high-resolution photographs of all inspected components and identified issues. Document all findings in a professional report, including non-compliant installations, safety hazards, and corrective actions, with references to specific AS/NZS clauses. Provide recommended rectification plans along with cost estimates. Identified Electrical Issues Below is a list of known issues based on my observations, which require verification and documentation: Missing LED Lighting in Clothes Drying Area: No LED lighting installed in the clothes drying area as per approved plans. No CCEW Provided: Builder failed to provide the Certificate of Compliance for Electrical Work (CCEW). Kitchen and Living Room Sockets on Same Circuit: Kitchen and living room power points share a single Hager C16 breaker, violating safety regulations. Dishwasher Lacks Dedicated Circuit and RCD: Dishwasher in a wet area lacks a dedicated circuit and RCD/RCBO protection, increasing shock risk. Ceiling Fan Switch Lacks Grounding: Metal ceiling fan switch in the courtyard area has no grounding or RCD/RCBO protection. Air Conditioner Lacks RCD Protection: 3500W ActronAir unit (Model: SRG131E) has a dedicated C32 breaker but no RCD/RCBO. Incomplete RCD Protection for Breakers: Only two of four breakers in Area A (C16 and C10) have RCD protection. No Recorded Grounding Resistance: No documentation of main earth electrode resistance (required ≤5Ω per AS/NZS 3000:2018). No Record of Initial RCD Test: No documentation of the first RCD test date from 2015.

We have an older property in Enmore and would like the electrics inspecting and testing for any defects, this would include the fusebox

Need 6 appliances to be tested and tagged at the rouse hill town centre today at 6:30pm by a certified electrician only

Just need a general inspection of safety switchboard, smoke alarm, circuits, PowerPoints, wiring etc. it’s an older house and just wanting to make sure there’s no issues as my parents are getting older

Just moved into a 5-bedroom home in Doncaster East. Need a licensed electrician to: • Inspect all electrical points/systems • Fix minor issues on the spot • Quote for any repairs or replacements Prefer someone available today or tomorrow. Tools and safety gear required.

I need electrical inspector (lei). I am sparky will upgrade old switchboard, hence I need inspector for requirements.