Find an experienced door installer in Sunshine Coast

Hi, I’m looking for someone to supply and install a standard internal door to separate my laundry from the kitchen, as shown in the attached image. -Dimensions: Approx. 79 cm (W) × 202 cm (H). Installer to confirm measurements. -Door: White or cream, opening outwards into the kitchen (hinges on the left). -Lock: Delf Valencia Satin Chrome Entrance Knob Set (Bunnings). -Installation: Including door, hinges, lock and any necessary frame adjustments. The door can be purchased from Bunnings or a similar supplier. We're looking for a simple, practical and affordable solution. Please quote for materials and installation. Thank you!

We have cut a new doorway into an existing internal plasterboard wall and need an experienced carpenter to finish the framing and install the door properly. Current opening is approximately: * 870 mm wide * 2100 mm high * Wall thickness is approximately 90 mm total * Existing wall framing is 70 mm timber with 10 mm plasterboard each side Some of the existing horizontal framing/noggins were cut when the doorway was opened up, so they are currently loose at the cut ends. The opening needs to be properly reframed and made solid before fitting the jamb and door. I am supplying the main materials, including: * 820 × 2040 × 35 mm internal door * 92 × 18 mm primed pine door jamb set * Door stop included with jamb set * Gainsborough matte black passage lever handle set * 70 × 35 mm H2 treated framing timber * Framing screws * Architrave * Hinges Work required: * Install new framing around doorway as required. * Secure existing cut/loose framing back into the new framing * Set the rough opening to suit the 820 × 2040 door without trimming/shaving the door if possible * Install and pack the jamb. * Hang the door * Fit hinges * Fit supplied door stop * Fit Gainsborough passage handle/latch * Fit architraves to both sides of the doorway * Adjust everything so the door opens, closes and latches correctly The doorway has already been cut, so there is no major demolition required. Looking for someone experienced with internal door framing and hanging doors, not just general handyman work.

I am looking for a builder to install a sliding door. It’s 1810 to 2100 size. It’s an existing brick house in Kuluin suburb and current door is wooden foldable.

Hi, I need an experienced carpenter to install a lockable door in my laundry. As shown in the photos, this door will come off the existing nib wall to create a partitioned space. We do NOT require an external-grade, weatherproofed door. We just want a lockable, exterior-style door to secure that back section. The door will be hinged from the timber post at the end of the nib wall. Your quote must cover: 1. Framing: Building a new timber door frame structure extending from the existing nib wall to the opposite wall. 2. Jamb: Installing a new timber door jamb. 3. Hanging the door: Hinging and installing the chosen door. 4. Hardware: Fitting a privacy latch or deadbolt handle that is key-lockable from the outside. 5. Finish/Trim: Installing tidy architraves/trim to cover the joints between the new frame and the existing tiled/plaster nib wall, the far block wall, and the floor. Specific considerations for your quote: Existing surfaces: You will be fixing the new frame against a painted plaster wall and a tiled wall base. This requires precise cutting of the trim to fit around the different materials neatly. Debris: Disposal of all waste material related to the build. Provided materials: I can supply the door and handles etc of its easier. Your supply: You must supply all professional tools, framing timber, fasteners, fixings, and all timber trim/architraves required for a clean finish. Please see the attached photos for a clear view of the nib wall where the door will be mounted. Required Skills: Carpentry Door Installation Internal Framing Finish Work / Architraves

Install an internal door with a lock

For a electric roller door that needs to be installed old one removed and change over lock from old one to new one (only replacing do to scratches)approx size 3700w x 2700 h

Wanting to change my front door from a glass and aluminium to a wooden.

Rear door ,will need to fit the locks

Install ten internal doors and handles

Install ten internal doors and handles

Reinstall this door handle to door - original from door - all screws and latches there. We removed to have another handle but putting original back. Don’t have time vacating property to do ourselves

Hanging new wardrobe Door I have the new door and the original door with all hinges and components

Looking for a carpenter/handyman to install a door to our ensuite entrance. 2330mm x 1030mm The opening is slightly wider than a standard door frame, so we’d like advice on the best approach. Potentially: * building out the frame for a standard door, or * installing a custom solution. Open to recommendations on: * standard hinged door * sliding door * cavity slider Would like the finished result to match the existing home style as closely as possible (white trims/modern look). Please include: * labour quote * whether you can supply materials/door * estimated timeframe Located in Nirimba, Sunshine Coast.

We have an elevated dining area that is curved and want to enclose it and make an extra room. So need two walls and a door installed and where the new walls are installed inside the new room the original circular edge of the old floor needs raising or filling.

We need an external door replaced. Looking for someone to supply, fit (including existing door hardware) and paint,

Replacing our external door. Need someone to mortise 3 hinges on the door to line up with those currently on the door frame. Then install lock/handle. I have hinges door and handle.

I want to change the normal lever entry handles on toilet, bathroom and bedrooms. There is six all up. I have the new handles.

Need a cat door installed into a screen door

The outer frame of my door is damaged due to moisture

Need dog door installed Have bought door already