Find experienced deck builders in North West Melbourne

Wanting this corner space (up to the concrete) levelled with gravel to create a space where either a small fire pit or dining setting can go. Also to have gravel sprayed to ensure they do not move. Please see second image for a rough idea. Would like for gravel to be flush with the preexisting concrete.

Need to change the top decking. Hardwood or Composite. 4600 x 1750 and 1500 x 2200 near the entrance.

We recently had new face boards put on to wrap around the outside of a deck adjustment. The person who did it said they could not get the bottom board any more flush to the ground due to the floor concrete level being very uneven which it is (higher at each end and dips lower in the middle). However the gap is quite large and more obvious now we have painted the wood so we want someone who is able to do a better job and cut the wood more in line with the ground to leave a smaller gap. We have two spare boards of wood to use for the job, want it done only removing the bottom board not the entire thing.

I am looking for a qualified and experienced person to install outdoor decking at my property in Craigieburn. The decking area is approximately 30sqm. I am flexible with timing for the work to be completed. Please refer to the attached photos for the current area and the style/finish I would like (“from and to” photos included). Scope of works include: •Supply and installation of decking •Frame/subframe if required •Outdoor decking similar to reference photos •Clean and professional finish Please contact me if you have any questions or require further information. Quotes and site inspections are welcome. Thank you.

I want to add the final decking board where the deck meets the house. It's not a straight cut and the measurements are hurting my tiny little brain. I have two full boards left over from the build that can be used. It would be a great advantage if you have experience with the product Perma Timber, and also have the bit used to secure the clips, as I have misplaced mine.

Build 2-3 Hardwood steps to decking & remove pine balustrade between. Width of steps between 1 -1.7m . Please provide qualifications and/or experience.

We are needing a deck built. Ideally would love someone to come out and quote

Hi, I’m looking to install decking with the size approximately 2.9m (W) × 7m (L)×25cm(H) on the concrete ground. I will supply the timber/pallet materials myself. Could you please provide a quote for labour and any additional costs (e.g. frame, fixings, preparation)? Thank you.

Hi, I am after someone with decking experience to help set up a timber deck over this existing verandah, as minimal as possible framing underneath as this is a concrete slab and I don’t want to create a large build up of the level. Please in your description tell me how you would approach this and photos of previous experience and what your price includes. It is roughly 24sqm

Sand and stain my decks 5mx5m + a step & 1800x4m Also supply stain

A wooden rail has rotted at the join and need replacing. The rails are about 2.8 m. 14cm wide, 5cm deep

Hi, I’ve got a small section of outdoor decking that’s been heat damaged from a firepit. The affected area is roughly the size of a dinner plate. The boards are slightly cracked and scorched. I’m looking for someone experienced with decking to: - Assess the damage - Either sand/fill and repaint, OR replace 1–2 boards if needed - Blend the repair so it matches the surrounding deck This is for a rental property, so the goal is a clean, tidy finish that doesn’t stand out. I’ve attached photos of the damage and the surrounding deck for reference. Flexible on timing but would prefer it done within the next 1–2 weeks. Please let me know: - Your recommended approach (repair vs replace) - Rough quote - Availability Thanks!

I’d like to install decking and add sliding doors on two sides of my alfresco area

Needing affordable cubby house decking that can neuter once cubby house is grown out of. Size wise we are thinking maybe 3.5mx3.5m or 4m length and 3.5m width. Have attached photos of the cubby measurements with the attached kids kitchen that we want the decking under anyway as a floor that we are laying a rug on. (No intention of it being a mud kitchen). Yard is sloped and so good water flow away from the area will be perfect but you will have the slope to make sure that we don’t end up with a sinking deck with weight when the grounds wet. The photos attached are… -Mowed hot of where we originally thought was best to put it and a pic of the slop I have tried to mark (grown but being mowed as we speak) 2nd another option but it’s quite sloped in the middle like a V could have water run down well if built raised slightly above. 3rd If you can make that area work over that side of the yard excellent. Also attached the cubby and the kitchen with all measurements, keeping in mind we want it to be the whole thing at the back of the deck and room at the front of it and at the end of the kitchen if it works if not the front is priority for a little table and chairs we have to sit on it for our little one in front of the cubby house part. Meadow Heights. Must be heat treated if pine ect. Best price and asap starting! *right person for the job may get the work for mapping out the area for a decent fruit/veg garden and building the fencing around that away from dog and perimeter around it, that will need to be elec wheel chair friendly width gaps between raised beds. Pics shown and discussed later time.

9.20m long ish x 3.3 wide. One part is under cover & end bit is exposed to weather. Small step from main deck the small deck leading into garage. Needs clean & resealed. Sanded & stained 2 years ago in oil. Cannot put amount as budget as not sure how much this will cost to do.

Main entrance and Alfrasco decking required. Material will not be provided.

Hi decks need to be washed with Cabot's pre wash, can use high pressure hose but needs to be scrubbed to remove any marks on the timber Cabot’s NATURAL decking oil (aqua deck), 2 coats need to be done, dried between coats according to instructions of Cabot's . (1/2 ltr already on site) Some tools are already on site but happy for you to bring your own if easier Deck sizes are below Deck 2 is a newer deck a few months old and this will be the first oiling Deck 1 is older Open to a quote on sanding the older deck before quoting as it's a few years old. Depending on price. Furniture removed before hand. 1st deck 4.3m x 8 m with seat/bench at the end which also needs to be sealed 2 sides and ends 2nd deck - newer first time being done 2.2m x8.6m

Few screws are coming out Need to remove old screws and replace with proper decking screws Please provide your quote and availability Should be around 20 screws

This task is to pressure wash and decontaminate a deck installed last year and apply two coats of stain to deck after cleaned and dried. This job will have to be carried out over three days. Day one clean deck Day two first coat Day three second coat Care taken to not coat rock work, brick work or concreting when applying stain Area approximately 50m2 All furniture and loose debris will Be removed prior to start day Stain and cleaner will be supplied

Sanding and painting deck area and front entrance