Find a reliable cooktop installation and repair service in Sutherland Shire

Require a dual fuel oven installed to replace existing oven. It is like for like with the current electrical wiring and gas supply there. The gas supply is LPG so oven will need to be converted over with the conversion kit which comes with oven.

Need to replace the existing cooktop/oven with the improved second unit. When the existing unit is removed, the replacement oven/cooktop is to be installed in the same position. The cabinetry face panel will need to be carefully unscrewed to allow installation and then screwed securely back into place once complete. The existing cooktop/oven does not need to be removed from the property — it is simply being swapped with the improved unit already at the property. Please ensure the replacement unit is installed correctly, connected and tested, with both the oven and cooktop confirmed to be working properly before completion.

Removed knobs to remove runners Now they won’t go back in. The screw through the knob is smaller than the hole on the oven wall. Must have been a nut behind the wall. Need stainless steel rivnuts probably to hold the knob in . Current knob screw 4mm. hole in oven wall 6mm Can’t put larger screw in knob

disconnect cook top come back second time to reconnect warranty replacement

disconnect cook top warranty team will take away and bring back reconnect once replacement arrives on another day.

I am replacing my gas cooktop with an induction cooktop. I need a licensed gas plumber to: Turn off the gas supply and safely disconnect the old gas cooktop. Permanently cap off the redundant gas line under the kitchen bench using compliant fittings. Perform a gas pressure/leak test to ensure the capped line is 100% safe. Provide a NSW Gas Compliance Certificate upon completion. CRITICAL REQUIREMENT: You must hold a valid NSW Gasfitting Licence and Certificate of Currency (Public Liability Insurance). Please include your licence number in your offer. I will verify it on the Service NSW public register before accepting.

I'm looking for a qualified/certified gas fitter/plumber/electrician to disconnect and remove existing kitchen appliances and install/connect the following new appliances - Westinghouse 60cm Freestanding Dishwasher WSF6602XC Westinghouse 60cm 4-burner Gas Cooktop WHG648SC Westinghouse 60cm under bench Electric Oven WVE6314SD

All-in-one Cooktop Swap: Cut stone benchtop + Electrical wiring & installation of new ceramic cooktop

Ceramic Cooktop needs hard wiring. I will purchase a cooktop today

Outer layer of glass on oven door has shattered. Needs replacing. Model of oven shown on photos

Disconnect old oven and cooktop and install new one of each and also disposal of both the oven and cooktop

A small chip has happened on the left hand side of a Miele electric cooktop. I am enquiring to see if it can be repaired in black with an epoxy resin

Run new power circuit for induction cooktop + installation of safety switch. ~20 metre run. Cooktop Details: Connected load 11.1 kW Maximum current rating 46.25 A There is an existing power point under cooktop cutout where the old gas cooktop is plugged into.

Swap 60cm oven with new one. Power point on both. Need to unscrew old one, put new one in.

Quote Need someone to install freestanding oven and rangehood. Also to remove the old appliances.

Looking for a Licensed Electrician to run a new dedicated circuit for an induction cooktop in Sutherland (2232). We are replacing a gas cooktop. The Job Includes: 1. New Circuit: Run a new cable from the switchboard to the kitchen. Switchboard is modern with spare space 2. Options: Please quote for two scenarios: * Option A: 15A circuit for Westinghouse PowerLite (WHI632BE) * Option B: 32A circuit for Westinghouse (WHI643BE) 3. Isolation Switch: Install a safety isolation switch in the kitchen as per AS/NZS 3000. 4. Gas Disconnection: Safely disconnect and cap off the existing gas line. (Preference given to those who can do both or bring a gas fitter). 5. Certification: Must provide a Certificate of Compliance (CCEW). Site Details: * Location: Sutherland 2232. * Timing: Looking to get the "rough-in" done before new flooring/kitchen installation. About house: Strata 2-storey townhouse, switchboard is in storage, ground floor(layout in the image).

Looking for a qualified handyman/appliance technician to service my kitchen gas cooktop and rangehood. Cooktop issues: Some burners do not ignite reliably A few burners light but go out quickly Likely needs cleaning/service of igniters, thermocouples, or gas ports Cast iron trivets have surface rust (please advise if they can be restored or need replacement) Rangehood (Airvolution): Light button is not working and likely needs repair or replacement What I’m after: Diagnose and fix ignition issues Ensure all burners operate safely and consistently Repair or replace rangehood light switch Advise on rusted trivets (restore vs replace) Notes: 5-burner gas cooktop Power and access available Flexible with timing Please include tools and any small parts required (happy to cover parts cost) Please quote including: Labour Any call-out fee Availability

I need installation of my oven and stove please

We have a new oven and need someone with a licence to connect the gas.

Remove existing oven and install new oven