Find experienced local carpenters in Illawarra

Installation of two new lockable doors to create a cupboard in an area underneath an existing stairs. I have included a drawing, however I am open to suggestions.

Hello, We are looking for a skilled handyman or carpenter to repair a broken drawer in a custom retail counter at our store, in Wollongong Central. The Issue: An internal divider in one of our main counter drawers has broken. This has exposed a sharp, splintered wooden edge, creating a safety hazard for our staff who need to access the drawer regularly. The damage was caused by the drawer being overfilled. The Job: The task is to repair the drawer divider to make it safe and functional again. The scope of work will involve: 1. Assessing the broken divider within the drawer. 2. Repairing the existing piece cutting and fitting a new piece of thin board to replace the damaged section. 3. Ensuring the repaired divider is strong, smooth, and free of any sharp edges or splinters. 4. Making sure the final repair is neat and tidy. Please see the attached photos which clearly show the broken divider inside the drawer. Requirements: - You must have experience with general carpentry, joinery, or cabinetry repairs. - You must bring your own tools and any necessary materials (e.g., wood glue, small nails, replacement board if needed). - Ability to work cleanly and professionally within a busy retail environment. - Public liability insurance is required. Location & Timing: Location: Wollongong Central, 200 Crown Street Wollongong NSW 2500 (exact location will be provided once the task is assigned). When: As this is a staff safety hazard, we would like the repair completed as soon as possible. Please state your availability in your offer. Please provide a quote for the complete job, inclusive of labour and any materials. Thank you.

Hello, We are looking for a skilled handyman or carpenter to repair a broken drawer in a custom retail counter at our store, in Wollongong Central. The Issue: An internal divider in one of our main counter drawers has broken. This has exposed a sharp, splintered wooden edge, creating a safety hazard for our staff who need to access the drawer regularly. The damage was caused by the drawer being overfilled. The Job: The task is to repair the drawer divider to make it safe and functional again. The scope of work will involve: 1. Assessing the broken divider within the drawer. 2. Repairing the existing piece cutting and fitting a new piece of thin board to replace the damaged section. 3. Ensuring the repaired divider is strong, smooth, and free of any sharp edges or splinters. 4. Making sure the final repair is neat and tidy. Please see the attached photos which clearly show the broken divider inside the drawer. Requirements: - You must have experience with general carpentry, joinery, or cabinetry repairs. - You must bring your own tools and any necessary materials (e.g., wood glue, small nails, replacement board if needed). - Ability to work cleanly and professionally within a busy retail environment. - Public liability insurance is required. Location & Timing: Location: Wollongong Central, 200 Crown Street Wollongong NSW 2500 (exact location will be provided once the task is assigned). When: As this is a staff safety hazard, we would like the repair completed as soon as possible. Please state your availability in your offer. Please provide a quote for the complete job, inclusive of labour and any materials. Thank you.

Need a deck lightly sanded and stained. There are a couple of small areas that will need planing. The deck area is approximately 70m2.

We have a few spots where our rabbit did his business and left stains on the polished wooden floorboards. We have been unable to remove easily, so I think it will need sanding and re-polish. Approx 4 separate spots, about 15cm diameter each spot.

We are looking for a labour hire / casual carpenter for immediate start. Opportunity for permanent work.

We did not do the staining properly and therefore need it removed and re stained.

I need a oil stain removal with a hot water pressure machine

Need a carpenter to re screw this glass balustrade to the timber deck at my airbnb property. Hoping to get done asap Pls see photos Located-jamberoo

Build passo 8 door shoe cabinet

We have deck which needs replacement boards, steps and balustrades. The framework looks good. I would like an in-person review and quote if possible, over the next couple of days. We are selling the property.

Oiling of a timber deck carefully around a tiled pool area. Deck approximately 40m2 also oiling of a timber batten fence and pergola. All materials provided. Approximately 3 hours work

There are some patches on the concrete that is probably from acid. Need these stains removed.

I have a new undersink water filter system into stainless sink 30mm hole required in sink done professionally.https://www.airtasker.com/my-tasks/installation-of-under-sink-alkaway-water-filter-into-stainless-sink-x01jy0c5wng53adwzhbxm9vfrjm/

Need to draw up, design Woodfire oven section with a bench. Brick Base. Design only.

I’m looking for someone experienced in furniture restoration or surface repair to help remove a stain from a white high-gloss MDF desk in Coniston (Wollongong area). I’ve already tried: • Soap and water • Baking soda + vinegar • Alcohol-based hand sanitiser The stain hasn’t lifted and may have lightly absorbed into the clear gloss finish. The rest of the desk is in great condition — I’d prefer a spot treatment or gentle buff, not a full respray. Ideal if you have experience with: • Furniture surface repair • MDF panel restoration • Glossy finish touch-ups (without damaging the surface) The desk is movable, but I’d prefer someone who can do the repair on-site if possible. Please bring your own tools/materials. Photos and close-ups can be provided upon request. Let me know your experience, availability, and quote — thank you! (Budget flexible based on experience and result)

I need someone to help restore a wooden/laminate benchtop that has chemical damage and surface scratches (see attached photo). The damage was caused by a cleaning product, leaving a dull white mark and some visible scratches. I’d like it sanded, polished, or treated to make it look better – it needs to be look the best Open to suggestions on products or methods. Please bring your own tools and materials.

Please come and see then provide me your quote. I want to downsize bar and renovate it to look better. Also, i would like to add suspended wine rack if possible.

Modify existing kitchen cabinet to fit a dishwasher. As in photos, Dishwasher to go on left (next to stove). Right side cabinet to be modified to either open cupboard or just a blank using existing door materials. Measurement from left side to corner is 640mm

I have built a timber deck for a client to install 4.5mL x 2.5mW absco shed on for garden storage etc I need someone to assemble and install the shed or assist in assembly and installation (would need to be a weekend job if we work together) the platform is built to size and ready to go for the shed I will install additional supports as needed once complete, shed is delivered, unpacked and ready to go