Find experienced local carpenters in Hamilton NSW

I’m looking for an experienced carpenter or skilled handyman to purchase and collect the materials, then build a modular table for a miniature hobby and filming Hello, My name is Bart. I am looking for an experienced carpenter or fabricator to build a modular table for a miniature hobby and filming project. The required design is: 1. Overall table size: 2,000 mm × 2,000 mm. 2. Four separate 1,000 mm × 1,000 mm framed sections that align evenly and bolt together. They must also be easy to separate. 3. Each section requires a removable 3 mm solid PVC top. The underside must remain accessible so magnets can move miniature animals and vehicles through the PVC. 4. A removable centre wall running the full 2,000 mm length of the table. This will consist of two PVC panels, each 1,000 mm wide × 1,000 mm high, fitted into slots so they can be lifted out. 5. The assembled table should stand approximately 1,000 mm high, with strong legs and adequate support beneath all four sections. The finished table must be level, stable and expandable so additional sections could potentially be connected later. I have a diagram showing the required layout. Please let me know if your company can complete this project and provide an estimate for labour and materials. I need someone with their own tools and suitable vehicle to collect the approved materials from Bunnings and possibly a plastics supplier. I can prepay Click & Collect orders or reimburse approved material costs upon receipts. Please quote labour separately and include examples of similar custom table or carpentry work.

Timber trim sealing (sikaflex) between trim and eaves and around windows

I have a small kitchen renovation.....most of the kitchen base cabinets are installed BUT i still have 2 base cabinets to install and the kitchen bench to be attached.

Looking for quotes(ignore my budget!) Just wondering if this is up your alley, it's amendments to our existing kitchen cabinetry. Our single drawer dishwasher has just died. Hoping to fix up the area of the cabinets to be able to fix a standard size larger dishwasher by removing the drawer underneath the existing dishwasher and then cutting away at the toe kick as well. The plumber who came to take a look said that it would be good if an extra panel could be taken out to the right of the dishwasher also if not structurally integral (see photos). I think it's all laminate but unsure about the toe kick material to be honest. Hoping to hear if you do this sort of things (or maybe know someone who could asist otherwise, if I'm very lucky!)

The legs on my leather lounge have been affected by hot water that was about half inch deep. They are rectangle block type legs. The insurance company needs a quote to repair or advice if the legs cannot be restored

I want to make custom board shelving with Led lights (inside translucent diffusers) for a retail shop. Really Tight Budget! Quotes Only!

Need a tradie with tools and who has worked with Kaboodle Kitchen cabinets to help remove a set and put in the new set. Current is under a bench top and may have been liquid nailed. Will need to bring all tools to take it apart. New draws and cupboards have already been constructed just need installation. Edit: there maybe some measuring and cutting of kickboards etc

Build a single 3.6m room wooden frame/gyprock wall and hang 1 door/handle- materials supplied

Strip/clean (or sand, happy to get advice on this) and then re-stain timber deck plus connecting step. Roughly 5m by 5m Happy to discuss and/or vary the job to get the best results. I will provide and/or pay for supplies separately. - Due date: Before Friday, 27 October 2023

We have a few Boconcept cabinets that need to be installed on the walls of our home. - Due date: Flexible

External stain glass window needs repair. Glass sliding down due to age and wear. - Due date: Flexible

New decking stained , old decking cleaned and stained , outdoor furniture cleaned and stained - Due date: Flexible