Book professional Car Repair Services in Inner South Melbourne

My car has been overfilled with engine oil and I don't want to drive it until the level is correct. Looking for a mobile mechanic to come to me and bring it back to the proper level. Vehicle is 2005 Mazda 3 sedan.

Looking for an experienced mechanic to replace 3 engine mounts on my 2015 Toyota Aurion GSV50R, 3.5L V6 (2GR-FE), 03/15 build. All replacement mounts have been purchased and are ready to install (new Transgold mounts). Mounts to be replaced: - Left-hand engine mount - Right-hand engine mount - Front engine mount Ideally looking for someone experienced with engine mount replacement and who has the appropriate tools/equipment to safely support the engine. Keen to get this done ASAP. Happy to travel locally if required (South East Melbourne area).

Fix Alternator Clutch Pulley Hi, I need an experienced mechanic/mobile. The alternator pulley is noisy/seized and i think it might needs to be replaced.

I have a cover on a Bus water pump that has corroded and I need it removed and swapped with the new one I have. It is attached by Alan keys that will need to be carefully removed so I have to not snap the heads. It’s in a semi tight area in the Bus engine Bay, but there is access. The new part also won’t line up exactly so a hose or extension pipe will need to be fabricated and installed also.

Replacing stock oem steering wheel (2019 volkswagen polo gti) to a carbon fibre one after market. No coding needed.

Looking for a mobile car aircon regas in Melbourne. Budget is around $120. Please confirm the total price includes travel, vacuuming the system, a basic pressure/leak check and the regas. Please also let me know if you are licensed to handle automotive refrigerant. Car make, model and year available on request.

need a vt ss steering wheel retrimed in black leather

Alternator replacement for Chrysler 300c 2013 model

Looking for someone to come and scan my car (2012 Nissan Dualis) as my check engine light is on! Car is not driving very well at the moment so will need someone to be able to come out to Murrumbeena :)

​Hi there, ​I need an experienced car audio installer or auto electrician to complete the final wiring and clean up the cabling for a head unit and reverse camera installation on my 2011 Ford Focus LV. ​What I have already completed: ​The new Pioneer DMH-AP6650BT head unit is mounted in the dash. ​The Pioneer RCAMAVIC reversing camera is fully mounted onto the tailgate, and the cable has already been routed through the car's body up into the dashboard cavity. ​Dashcam is physically mounted. Only thing to do is cleanup wires. It is hardwired to fuse box ​What I need help with (The Task): ​Camera Power Wiring: Properly connect the camera’s front Red (ACC) and Black (Ground) leads into the pre-installed Aerpro APP8PIO9 bullet terminals behind the radio. ​Parking Brake Signal: Connect the Pioneer's Light Green park brake wire (either to the Aerpro SWFO2C interface handbrake output or wired to ground to bypass the lockout). ​Cable Cleanup & Test: Neatly bundle, tie-down, and tape the excess harness wiring behind the dash cavity so the head unit sits completely flush and secure without pinching any lines. Verify that the camera automatically triggers on the Pioneer screen when shifted into reverse. ​Parts Provided: All components are on-site, including the vehicle-specific Aerpro SWFO2C steering wheel control interface and APP8PIO9 secondary harness (no factory wires need to be cut). ​Please bring your own basic tools (electrical tape, zip ties, or crimping tools if needed). Located in Caulfield North. Looking to get this sorted as soon as possible!

Just picked up a second-hand 2002 Toyota with a pretty scratched up steering wheel. Looking for the cheapest and most basic option to get it cleaned up. Thanks

My VW shows this warning light, it doesn’t always appear. Please help me to fix problem

Minor sun damage (flaking on the top) to my Volvo XC60 steering wheel. Looking to have it repaired so it doesn't get worse.

Looks like Engine Valve cover Gasket needs replacement. Oil leaks visible on top of engine

I need a mechanical engineer to perform pre purchase inspection on a car I wish to buy from a private seller

Need this installed, it needs to be sowed. Purchased from https://www.customsteeringwheelwraps

I've replaced the broken front timing chain guides on my 2005 Ford Courier 4.0 V6 without changing or removing anything that would affect the timing, but now I need a hand putting it all back together. From doing the RTV gaskets on the timing cover, same on the water pump, then reattaching the balancer, fan, fan belt, radiator and all hoses and sensors & getting the thing started. I will supply oil, coolant & appropriate RTV gasket maker sealants.

I require a stock suspension set (struts, shocks & springs) from a wrecked f83 m4, I can collect the parts Melbourne wide, just need someone to source them for me. Task fee is for sourcing cost.

I’ve got a 2013 bt 50 and need the front struts and back shocks done. Ive brought struts the shocks already KYB excell. Let me know what you can do thanks open to offers

Small rusted car radiator pipe needs to be replaced. Seems to be a press fit, very tight. Parts are off car so can be brought to you. Photo shows part with hole on the right & unit with good 21mm steel pipe on left.