Find skilled builders in Quakers Hill

Driveway fenced gate damaged while reversing vehicle need it fixed it’s motored gate slightly bent motor still working

want to replace the clear panels for new ones can be either clear or smokey colour there are 3 panels each side so 6 in total to replace dispose of old panels

Need to clean pergola roof, having mark of fungus , must need to remove those as well. Photo attached as well. welcome to come and provide quote as well. Green fungus seen in photos Dimensions approximate 8m * 4.5m Or offer me your best price

Put together this pergolo in my front yard, needs 2 extra posts in the back i think, if any extra material needed will be paid separately thankyou

Remove the damaged roof sheet for a pergola in back yard, and supply and install new clear roof sheet. Pergola is around 6.8m by 2.8m. Roof sheet need to be suitable for outdoor, and provide option price for hail resistance roof sheet

My heavy driveway swing gate (NOT sliding) has dropped off the bottom pivot and is currently sitting on the ground with temporary support behind it ❗️ Gate post is solid — the bottom pivot hinge failed. Need an experienced metal gate repair person with proper tools. ✅ Safely support & lift gate (bring jack/stands) ✅ Replace or weld new bottom pivot hinge ✅ Rehang & align the gate ✅ Quick rust protection (cold gal or primer) ✅ Check top guide hinge My husband can be onsite to help support/lift if needed

2nos. 3x0.78 & 2.2x0.78 easy shed. Over exisiting new Concrete base.

We need help putting together our EasyShed. It’s a 2.08x.97x1.5m shed that doesn’t need to be drilled into the ground/secured in the grass (yet), but just needs to be put together. All original parts included in the box and power available if necessary.

All Materials for a gate is already supplied. The panels seen in the photo are actually 2 aluminium fence panels which I'm hoping to assemble as a double swing driveway gate (or slide). I need labourer to help advise me and install them on an existing concrete drive way. 2x 2.4m Width + 1.8m High panels

I'm looking for an experienced and licensed Pergola builder and also landscaper who can transform my existing backyard (see photograph) into modern looking backyard. We would like to seek a design first from your catalogue and the quote.

Thinking of installing a Bunnings mimosa gazebo

Need someone to put a sealant between the pergola to stop the water

I need a wall pushed back into a cavity, wall removed from kitchen and bathroom access door closed. Patio steps added. This needs on-site inspection and quote done

Need someone who has the right tools, to install driveway lights. Please look at the photo attached. There are four lights and they come with screws, and i need it to be drilled onto my driveway (which is concrete)

The job involves preping the existing concrete, and applying the sand and cement (4:1 ratio) as a level layer (40mm - 50mm). The area is approx. 20 squares. Material and labour

Updated with BOM, Design layout details and sample image from website. Firstly need to remove the old existing pergola (no need for disposal). Next, setup and install new Stratco Outback unit 5.0m wide x 3.5m depth that is attached to the fascia board of the house. Both the front post to be installed into the ground with concrete. All fixtures provided with the set from Stratco. Require to have own tools that is right for the job.

Need to install pergola (colorbond) measurement in the pics …

Need a quote to build pergola for the backyard 10mx3m

Need to assemble 2 sheds EasyShed 3.75m x 0.78m x 1.98m Narrow Slider Shed Need to apply Sika waterproofing around the shed to stop water. Will supply

I need a general contractor/ roof tiler to fix a leak in the pergola. It’s a very minor leak at the moment but I want to get it checked and fixed before it turns into something major. The leak is just above the barbecue in the photo.