Find skilled builders in Parramatta

I need someone to assemble and install a 3.75m (L) x 1.5m (W) x 1.8m (H) EasyShed on a concrete slab. The slab is already done but has a slight slope (around 30–40mm over 3.7m), so a bit of packing or levelling may be needed during setup. The width of the area in the attached photo is 3 metres for reference. The shed is brand new and still boxed — standard EasyShed design (flat roof) with all parts and fixings included. Tasks include: Unpack and assemble the shed Secure to existing concrete slab Minor levelling if required Ensure doors open and close smoothly What I’ll provide: EasyShed kit (brand new, boxed) Dynabolts for securing to slab Power and access to tools if needed You’ll need to bring: Your own tools for assembly Level, drill, and any packing material (if required) Previous experience assembling sheds (preferably EasyShed or similar)

Replace old brick driveway with concrete. Remove the brick flooring, level then replace with concrete. Approximately 200 square meters.

I need to clean/wash the underside of my pergola roof and pressure wash the top of the pergola roof.

Install shed either: 1) Barakula by Silla 10 x 10 3.13 x 3.05 meters 2) STAR cabin by SHESHED 3 x 3 meters

Seeking a quote at this stage to assist with strata approval for enclosing a covered patio of a townhouse. Very keen to proceed with the project once strata approval is granted. Would like to enclose the patio sides (each approx. 2.5 m) with polycarbonate or other suitable panel materials for a neat, weather-protected finish. The side fences are shared with neighbouring properties, so no structural changes can be made to them. For the front section (approx. 7 m wide), would like to explore options such as sealed outdoor blinds or sliding mesh + polycarbonate glazed doors to achieve a weather- and insect-protected space. Requirements: - Site visit and quote for supply & installation - Include framing, tracks, and sealing - Minor infill/sealing under existing roof structure to close small gaps (no roof replacement or modification) - Advice on suitable design and materials appreciated Budget: Around $2,000 – $3,000 (flexible depending on design and materials) Purpose: Quote for strata approval (intend to proceed after approval) Timing: Flexible over the next few weeks

Install a portable gazebo or pergola, supply to be made by the installer.

I have a pergola at by back yard which needs to get painted, I had bought paints and spray painting tools. I need some person to paint it.

Assemble and seal shed Pics and specs on the uploaded pictures. The concrete slab has been laid and assembly can be done form next weekend onwards.

Installation of garden shed in the parking area undercover

Have a small shed approx 3.0 x 1.52m to erected and a base built.

Need a pergola to be done

Need to have own tools, transport and experience

It is a 3*3 easy shed for garden storage.

I need help from some one who is experienced in installing either stratco or similar decent brands insulated pergola at my backyard access is very easy and and its just under 25 sqm

Need to build a brick wall between two posts under the Pergola in my backyard. The space will be used to place 30kwh solar battery systems. Currently there is a 1 meter brick wall as the fence. Need to raise this brick wall to the top of the pergola. See attached picture.

I bought a 3*3 shed and needs help with assembling

Posting task for quote only for Joe

Easyshed shed 2.1 by 3.0 on a concrete slab. Clear to go

i have purchased a pregola and need it installed. See website below of the product purchased... https://www.kozyard.com/products/apollo-10-ft-x-12-ft-wood-like-aluminum-hardtop-gazebo-with-galvanized-steel-roof-and-mosquito-net