Find a local brick fencing contractor in West Melbourne

Looking for an experienced bricklayer to build a front brick fence using orange bricks on existing concrete footings. Job Details: Total Length: ~15.15m (includes a 3.1m driveway gap) Columns: 6 columns, each 1.2m high Infill Walls: Single-brick width, 6 bricks high between columns Finishing: Brick columns to be capped with pavers Foundations: Existing footings ready to go Please supply your own tools and mortar. Let me know if your quote includes materials or labor only. Photos of previous work appreciated! Mock-up attached.

Fencing approx 28 meter length and 1.9 m high

I have broken the fence by using a crow bar to remove cracked concrete step, there was no movement on 1 side & a crack in the other so i removed all 80-100 brick that were loose & just wanting to relay bricks

Demolish and removal of brick fence and associated footings at front of property. As per photos, the fence is in 3 sections with 2 x seperate columns and 1 x main section. Column 1 1780x360x360 Main Section high point - 1780 x 360 Low point - 1150 x 250 Total width - 3940 Column 2 1780x440x240 Cost to include removal of all debris, and leaving the area clean and filled to allow installation of new aluminium fence. Care required to avoid damage around nearby tap and footpath, and must have appropriate experience and insurances.

Rendering work needed for brick fence

Looking for a bricklayer/landscaper to build a front brick fence, similar (not exactly the same) to the AI-generated design. I’ve attached a photo of my house for reference. Scope includes: * Brick fence at the front * Brick garden beds aligned with each step * Brick mailbox/parcel box Steel fencing is not required. I can supply materials if needed, but happy to get quotes both with and without materials. Also need soil filling once the fence is completed.

Hi, We are looking for an experienced bricklayer/builder to construct a brick fence. Scope of work: * Build a brick fence approx. 12 meters long and 2 meters high * Proper footing/foundation as required * Ensure solid and straight structure (long-term durability) * Advise on best materials and construction method Important: At this stage, this job is for the fence only. We are planning to install a pedestrian gate and driveway gate later as a separate job, so please allow for this in the design (openings, posts, etc.). We are open to: * Supply & install OR labour only * Suggestions on cost-effective options (brick, block, render, etc.) Location: Maidstone, VIC Timing: Ready to start soon Please include: * Your experience / past projects * What is included in your quote * Estimated price * Timeline Photos of similar work would be appreciated. Thanks!

Looking for a local bricklayer that can fix the fence pillar. Was accidentally knocked over by the excavator. Bricks supplied. 90cm high x 36cm width

Need brick fence fixed as some bricks are loose and need redoing

A single brick fence collapsed due to rain it’s about 4m long, height upto upto 500 mm. Looking for someone who can fix the fence with existing bricks. If required can buy few on top

Build brick fence and then render. 6m length and 1.2.m in height

Looking for someone with fencing experience to finish off installing colorbond fencing between the existing brick piers (including fixing part of my attempt). Approx. 21m of fencing to go (24.25m total). All fencing materials have already been purchased and will be supplied (including channel post, rails, infill sheets, tek screws, masonry screws, etc.). Please note: channel post, rails & infill sheets will all need to be cut to varying sizes (e.g. 1200mm infill sheets cut to approx. 950mm) Photos show the two (2) sections I attempted and the result I was trying to achieve. Please note: the hedge and existing fence panelling shown in photos will be removed before install.

Low brick fence approx 10 metres. Looking for someone to knock down and remove the bricks.

I have some driveway gates that I would like to be installed. Currently there is not anything to hang them off. Youd need to build the brick pillars on either side so that it has something to attach it to. I will also require a pedestrian gate to be installed. As this gate needs to fit in the gap between the driveway gates and the current fence there may be a small amount of modifying a metal gate to make it fit I would like to find someone thats interested to quote on how much this is going to cost to do

Small brick retainer - please see AI imagine for reference. Have alot of bricks same as house, it is “natural motar” would love it to be same as house. Unsure of measurement

Bricks are reusable as are the uprights, the top and bottom rails need to be replaced. Black mortar.

Needing brick fence repaired, there are some bricks still here that fell but not sure if all are still there also need the gate to be reattached Would like written quotes please.

Need brick fence with render installed on my corner block. Just one side. Length 28mts. Please provide photos of your recent jobs and your quote. Thanks

I need to get brick fence done!

Hi, I wanted to have a brick fence repaired. Gap in between bricks. Could you please let me know how much it would cost or if you need to come and look at it to give a quote.