Find trusted awning repair experts in Bondi Beach

1. Awning Fascia Measurements Please measure the front awning fascia above the shopfront glazing. Required dimensions: *Total length of the awning fascia across the tenancy *Height of the fascia panel *Depth of the awning *Distance from each end of the tenancy to the fascia area *Height from ground level to the bottom of the fascia *Height from ground level to the top of the fascia 2. Existing Blade Signs There are two existing circular blade signs mounted under the awning (visible in the photos). These signs will remain in place and will not be replaced. Please measure the following for both blade signs: *Diameter of the circular sign face *Thickness of the sign *Projection distance from wall to outer edge of the sign *Height from ground level to centre of the sign *Height from awning underside to centre of the sign *Distance from nearest wall or column 3. Photographic Documentation Please provide: *Photos of each blade sign with a measurement tape visible *Photo showing awning fascia measurements *One wider photo of the shopfront for context 4. Deliverables Please provide: *All measurements in millimetres *Photos with measurement tape visible *A simple marked-up photo or sketch with the main dimensions 5. Contractor Requirements The contractor attending the site should: *Bring their own measurement tools and equipment *Bring a ladder if required to safely measure signage and awning heights *Hold their own public liability insurance appropriate for site visits

URGENT I need someone to put up a decal sticker on an awning. 10 min job just need a ladder BEFORE 8am TODAY

We have a cassette style awning that requires installation. It is 6m x 3.8m. It will require removing the exterior panels on the house to install a frame for it to be attached to. Flexible on pricing and you're welcome to inspect prior to finalising the price.

Scrap back and clean awning prime and paint with exterior paint X 2 Also scrap back and paint side of awning and paint.

Replace existing motorised awning with a new one -I’m happy to help lift awning The new awning is from Bunnings and it’s full cassette awning Power is already there Due date: Flexible

I would like the paint and old lettering and 2 X old signage panels removed from my shop awning. There are 3 sides. It needs a tall ladder solutions and scrapers. (Not providing tools). Will upload photos. Thank you. Start ASAP but flexible - Due date: Before Friday, 4 August 2023

We need an awning painted over a cafe in bondi beach It's approx 7m x 3m and maybe 5m from the ground at the highest point You will probably need a fair bit of gear and experience. It's a canvas/vinyl awning over a steel/aluminium structure. If you look in the photos it's the pale yellow surfaces - Due date: Flexible - Due date: Flexible

Put a Dune 1.4m x 2m new awning on roof racks of a Toyota chr koba with Toyota roof racks. https://www.anacondastores.com/camping-hiking/tents/gazebos-screens-shades/dune-4wd-14m-x-2m-awning/BP90132524-khaki - Due date: Before Tuesday, 19 April 2022

Removal of the white lettering signage from the shopfront awning. Requires own ladder. The lettering comes off easily.