Find experienced auto electricians in Maroubra

Replace a tcv plug and connectors on my landcruiser

Chasing an auto electrician to Replace a tcv plug and crimps that run too my fuel pump, new plug and crimps are supplied just need installed and tested

2026 Ford raptor - Bodywork repair and parts installation. Below is a brief breakdown of the work, I have broken down into 3 sections for ease 1- painting of bodywork 2 - decals and sticker installation (supplied by me) 3 - parts installation (supplied by me) 1-Repair scratches on front Passenger Wheel Arch and touch up paint two small chips on bonnet - Silver Bumper painting- grey Face to match car colour and orange bash Plate on under Side. 2-Decal install only, I will supply the decals/tints -2 new raptor tub stickers – remove existing and install new -2 Front Headlight tint films with black outline. (Purchased from 21 overlays) -2 front fog lights tint film – 2 dots to stick on fog light (Purchased from 21 overlays) -3 Rear brake lights tint film – (Purchased from 21 overlays) -Remove Rear Ford badge black sticker / install replacement supplied by me. I did a bad job myself!! tint film – (Purchased from 21 overlays) - install new black Reflective Baja decal on outside of rear window. 3 - Install of parts – supplied by me. Let me know what you can’t/don’t want to do. -4 mud flaps -Soft open strut tailgate bars -Bonnet windguard -4 Grill lights -Small grill infill with light connection -Blow off valve - install interior screen protector I have tried to add pictures of most items starting from item 1-3 and am happy to provide further information if you would like to send me questions.

I have recently purchased a decal from Touge Nation for a Suzuki Jimny XL. I was hoping for a quote please to professionally install.

Looking for a qualified auto electrician to install and wire up an auxiliary battery system in a camper van. All materials are already supplied — just need the installation and wiring completed. What I have ready: • Auxiliary (deep cycle) battery • DC-DC charger • Power/distribution board • switches and usb chargers • Cabling • Lighting already wired/run through the ceiling • mini fridge • isolator Etc Job involves: • Mounting and connecting the auxiliary battery, DC-DC charger, and power board with all switches and cables installed to joinery and walls around the van. It’s not much. • Running an ignition-sense wire from the DC-DC charger to a switched (ignition-on) fuse in the van’s fuse box, so the charger knows when the engine is running and starts charging the aux battery. (Blue cable) • Wiring in the switches and existing ceiling lighting circuit • General check that everything is safely fused and connected correctly I will be around helping, I’m a carpenter and I’m building it myself. Please send a quote for labour.

Issue 1. Fridge automatically switching off after being turned on. Issue 2. Solar panel over charging leisure battery

I have aftermarket Alternator Denso style 70A 27060-16460 need someeone who can instal an remove old one

Polish cloudy headlights Volvo xc60 Location maroubra

I need someone to install a set of Yakima roof crossbars on my Ford EcoSport 2018 (flush roof rail type). Either https://www.roofracksgalore.com.au/yakima-aero-thrubar-black-2-bar-roof-rack-for-ford-ecosport-5dr-suv-with-flush-roof-rail-2018-onwards-gp0261xdq or https://www.roofracksgalore.com.au/yakima-aero-flushbar-black-2-bar-roof-rack-for-ford-ecosport-5dr-suv-with-flush-roof-rail-2018-onwards-gp0276f30 (open to recommendation). The product above that I'll but includes the bars, the fitting kit and the instructions — I just need them mounted securely and correctly. The kit attaches to the factory mounting points on the flush rails, no drilling required. Should be a straightforward job for anyone who's done roof racks before (around 30–45 mins). Please bring your own basic tools (I can take the car if it's around Maroubra or Hurstville).

Hi, Looking for a car audio installer to fit a new 6.8" double-din head unit (Pioneer DMH-Z6350BT) into my 2014 Subaru XV. I'll supply the head unit and all harnesses (Aerpro CHSU14C + APP9PIO8). Also to fix wiring on the right hand side drivers speaker. Just need the labour. The install needs to retain: Steering wheel controls Factory reverse camera Factory USB Looking for someone experienced with Subarus who can wire it cleanly with no cut factory wiring. Should be a straightforward plug-and-play job with the harnesses provided. Located in Randwick. Happy for mobile install or to drop the car to you in the eastern suburbs/inner south. Please quote labour only and let me know your experience with Subaru fitments.

Need to swap out baby seat to booster and change another swat

need an experienced auto electrician or mechanic to diagnose a no-power issue on my Mazda 3 2010 (BL). Symptoms: Car is completely dead No lights, no dash, no horn, no crank No clicking or sound at all when turning the key What’s already been done: Brand new battery installed Battery terminals cleaned and tightened Checked fuse box (no obvious blown fuses) What I need: Someone to properly diagnose the issue (not guess) Likely checking: Main power cable from battery Ground/earth connections Main fuse / power distribution Ideally bring a multimeter/test equipment Outcome: Identify the exact fault Advise what needs to be fixed (or fix on the spot if simple) (No sound, no click click and no light or horn)

Upgrade old solar system in bus. Kit will be 2 batteries 2 panels 1 DC to DC charger and 1 inverter

I have damaged the screen on my infotainment system. I have purchased a new one and need help with the installation please. I also would like help running a cable to the back camera.

Hi - I've sourced a new battery for my Mazda CX5 (2021 model, stop start battery) - however, Supercheap Auto were not able to install it. They advised that Mazdas needed a special tool, although I'm not able to find any info of this online. Looking for someone to come and install for me please.

I have a hiace van with a Kenwood head deck, I have x2 6x9 speakers mounted and need someone to connect them to the head deck and tune the stereo for the speakers, would also like thoughts on if I will need an amp to run them,

Toyota Hiace van needs alternator to be replaced

I bought an aftermarket head unit on Amazon and need someone to come and install it in my car. I've got everything to install I just need someone to come and do it for me. Honda accord euro 2006

1. Sort charging issues from 4x4 to camper trailer and 2. install a second DCDC in the 4x4 as the battery is 340AH and I'd rather the option of using 2 chargers when needed and when not towing. An isolator to this second DCDC is also likely needed. The setup: - A Redarc SBI12 in the 4x4 with and anderson that runs to the boot of the car and charges a lithium battery via 40A DCDC - which works fine. - An anderson on the tow hitch also connected to the same SBI12 to send power to my camper trailer. The trailer has its own DCDC and 2 x 100ah lithium batteries. - Smart Charging is supposedly disabled in my 4x4. My DCDC in the trailer seemed to be playing up and not taking charge from the car or from solar (in built MPPT). This was causing erratic fluctuations in current. I replaced the DCDC and these issues went away but I seem to be now only getting a flat 10Amps into the batteries even though the battery voltage is 13.1, and the SOC from the monitor is 63%.

I need a Kings 40v DCDC charger installed in my mitsubishi outlander (2009). I have the 50v wires and the DCDC charger. I would need cable ties, rubber wire tubing and a drill/screws as well as someone to hook it up to the cars alternator batter near the engine and then feed it through to attach it to the battery I have in the boot. So that the batter in the boot will charge as I drive.