Find trusted car battery replacement experts near you

Install STEDI LED Fog Lights & Wiring Kit – 2016 Mitsubishi Triton. ​Looking for a qualified auto electrician or experienced accessory fitter to install a complete fog light system on my 2016 Mitsubishi Triton MQ. ​The car currently does NOT have factory fog lights (it just has the solid plastic blank covers on the bumper). ​I will provide all the parts: ​A Triton MQ-specific fog light kit containing the open-hole plastic bumper surrounds, a complete 12v fused wiring loom/relay, and a factory-style dashboard push button. ​A pair of STEDI Universal Type A LED fog lights (which will be mounted inside the new bumper surrounds instead of the cheap halogens that come in the kit).

Finish connecting last 4wires on upgraded head unit with reverse camera and Front and rear dash cam and wire up a custom fuel gauge until I can get the plug replaced in my instrument cluster I can only pay 200 please someone help please

Need qualified auto electrician for daughters MG3. One headlight wiring issue and high beams aren't working properly.

I am after a mobile auto electrician to install my LED taillights on my ute tray. They are direct replacements of what I had previously, however, I am having trouble getting them to function correctly. Brake lights only work properly when ignition is on, but when car starts and runs, they flicker. Indicators are working fine. Tail lights are not working at all. If this is something you can help with please reach out!

Want to install central locking in my van hiace

Having an issue with my battery. There’s too much current being drawn when car is off. 300ma and is draining my battery.

Audi Q7 2012, Q7 3.0TDI quattro, Engine: 3,0L 6 cyl Turbo Diesel, Transmission: 8spd Tiptronic. Not getting 12V to the plug connecting the thermostat. Also getting the following errors I n car. I had brought a Ancel VD700 and saw these errors showing up. P059700 Thermostat Heater Control Circuit,Open U102600 Transmission control module,Read out DTC P085100 Park/Neutral Switch Input Circuit Low P162400 Requirement - malfunction lamp on,active P275400 Transmission Fluid Cooler Control Circuit 00190 Driver exterior door handle touch sensor-Short circuit to ground 00193 Right rear exterior door handle touch sensor Short circuit to ground Looking for someone who can remove all these errors and get back the car to be working again.

Need an auto electrician to install a reverse camera and diagnose/fix a non-working car horn. Please provide a quote for both jobs."

I need an auto electrician to look at my Anderson plug on my roof top tent! It’s hard to plug in in its current location and I’d like to try orginise something differant

Needing a mobile auto electrician to meet at Redbank where van has broken down to repair LDV deliver 9 van Error codes P0341 camshaft position centre A P0340 EGR A insufficient flow P045B EGR B control Since breakdown, fuel and oil has been topped up and camshaft position sensor replaced. happy to discuss and negotiate budget price if you could please note in your offer a rundown of what your quoted amount covers.

I have a 1991 landcruiser 80 series, when I plug a charger in the lighter socket it trips the radio and clock that are directly above it on the dash and all three don't work. When there is no charger plugged into the lighter socket the radio and clock work fine. I assume there is a short behind the dash so would like someone to fix it.

Harley 500 street Want to change handle bars from low to high bars and require wiring loom to be adjusted/lengthened In the bars its self some switches have 3 wires and the plugs have 2 wires Also have the bike here for you to be able to test My budget is for connection to be able to assist

Got a 1996 Hiace 1kz te that’s needs a bit of maintenance before I can take it in for a blue slip inspection Currently I like help with following below. Clear codes 39 for fuel pump tempture sensor Tidy and crimp some wirring lume connected to plugs Code reader would be essential Check overall engine for anything else that it might need to be done for blue slip inspection Currently

Passenger window not going up and central locking not locking passenger door

Unsure on price please make an offer Toyota granvia starting issue Previous starter motor clicked and wouldn’t turn over Installed new battery and starter motor and now car makes no sound when trying to start Unsure if starter relay is faulty or something else Ran fine until this occurred

Need an auto leccy to have a look at the indicators on a 75 series LandCruiser. When brake pedal is applied or headlights are on the indicators flash fast. There has been times also where the indicator has just stayed solid. Cheers

Install to spot lights , reverse camera and a car stereo Bluetooth device. I have the 2 spot lights and the harness. I have the reverse camera and cables. I have the Bluetooth device but the adapter is too small to convert to my Ford Falcon BF. The factory Bluetooth adapter in the ICC 7nit is 30mm wide, the Bluetooth device has a 20mm adapter

I have a Holden Colarado ute front seat stuck in down position. Backwards and forwards and up and down work. Is there a way to get it upright

2013 Hyundai i30 currently fails to start and just clicks as I turn the ignition on. Need some help troubleshooting what the problem is. Car is parked in apartment parking

Description: Looking for someone experienced with 4WD electrical installs (auto electrician or experienced installer preferred) to assist with fitting a KickAss 12V 120Ah Slimline Lithium Premium Dual Battery Kit into my GWM Tank 300. The KickAss kit is designed as a plug-and-play system and comes with everything required, but I’d really value input from someone experienced to ensure the layout, mounting, and overall finish is done properly. I’ve already started planning the layout and identified the best location for the battery in the rear cargo area. I’m after someone who can help refine the setup and carry out a clean, professional install. Scope of work: • Assist with final layout/positioning of battery and components • Securely mount the slimline lithium battery in the cargo area • Drill into the floor and install rivnuts/nutserts for solid mounting points • Modify/reposition the factory subwoofer/amp so it doesn’t foul on the battery • Re-secure sub/amp once repositioned • Assist with cable routing and cable management (safe, neat, and protected) • Ensure safe clearance around battery terminals and cabling • General tidy-up to ensure nothing rubs, vibrates, or creates a hazard What’s included in the kit: • 120Ah Slimline Lithium Battery • 25A DCDC Charger • Wiring kit (incl. cabling, fuses, connectors) • Mounting hardware (from kit) Requirements: • Must have experience with dual battery / 12V setups • Must have own tools, including rivnut/nutsert tool • Experience working on 4WDs or custom installs highly preferred • Ability to deliver a clean, safe, and well-finished install Notes: • Space is tight due to factory bolts underneath, so experience with custom installs is important • After a properly thought-out setup, not just a quick install • Happy to assist on the day if needed Location: Preston VIC Timing: Flexible (sooner preferred)