Find trusted car battery replacement experts in North East Melbourne

Auto electrician needed to install remote lock, Alarm, Immobiliser, reverse camera and repair faulty horn (Auto horn when steering wheel is not centre) + door speaker not working for 1999 Nissan Skyline R34 GTT auto

My car AC is not cold but its still blowing normal to warmer air. Have asked my mechanic and he said AC compressor faulty and replaced it. It was said the old one seized. After changing the new AC compressor, it still didnt work and he said will need electrician to have a look and there is no power to the AC compressor. Car is 2014 panamera S petrol. Thank you

Description: Looking for someone experienced with 4WD electrical installs (auto electrician or experienced installer preferred) to assist with fitting a KickAss 12V 120Ah Slimline Lithium Premium Dual Battery Kit into my GWM Tank 300. The KickAss kit is designed as a plug-and-play system and comes with everything required, but I’d really value input from someone experienced to ensure the layout, mounting, and overall finish is done properly. I’ve already started planning the layout and identified the best location for the battery in the rear cargo area. I’m after someone who can help refine the setup and carry out a clean, professional install. Scope of work: • Assist with final layout/positioning of battery and components • Securely mount the slimline lithium battery in the cargo area • Drill into the floor and install rivnuts/nutserts for solid mounting points • Modify/reposition the factory subwoofer/amp so it doesn’t foul on the battery • Re-secure sub/amp once repositioned • Assist with cable routing and cable management (safe, neat, and protected) • Ensure safe clearance around battery terminals and cabling • General tidy-up to ensure nothing rubs, vibrates, or creates a hazard What’s included in the kit: • 120Ah Slimline Lithium Battery • 25A DCDC Charger • Wiring kit (incl. cabling, fuses, connectors) • Mounting hardware (from kit) Requirements: • Must have experience with dual battery / 12V setups • Must have own tools, including rivnut/nutsert tool • Experience working on 4WDs or custom installs highly preferred • Ability to deliver a clean, safe, and well-finished install Notes: • Space is tight due to factory bolts underneath, so experience with custom installs is important • After a properly thought-out setup, not just a quick install • Happy to assist on the day if needed Location: Preston VIC Timing: Flexible (sooner preferred)

Looking for an auto electrician to install a Sony head unit and sub

Need a sunroof button replaced in a Mazda 3 2009. Need this done asap

I’m seeking an auto electrician to tix a car sunroof of a (B200 Mercedes) 2006 model. It's jammed & failing to open/ function.

I need a car stereo unit installed in my car

2005 Malibu Wakesetter VLX. No spark. New coil, new ignition control module. Coil pick seems to test fine. Possible broken wire in loom

Wire up 12 v system in a new Dmax

Looking to wire and Orginal classic car radio and taco into car All wiring loom is there as it was swapped out of another car I own Both radios were working just need it reconnected with existing wiring

I have a Stedi STEDI ST3303 Pro that needs to be installed on the front bar of my Jeep Grand Cherokee. Comes with wiring loom and instructions.

Hi, I’m helping a friend with a 1994 Toyota Corolla AE92 automatic and I’m hoping to get some experienced auto-electrical advice or if needed assistance to make sure we’re approaching the repair the right way.Budget is for diagnosis and advice only. Happy to increase for the right expertise The car has wiring damage from an earlier cigarette lighter circuit repair that overheated and burned back into the loom. That work wasn’t done by the owner. While driving, smoke came from the dash, the car lost power, and it now won’t crank. There’s visible heat damage to several ground (earth) wires and nearby wiring behind the dash. The cigarette lighter itself doesn’t need to be reinstalled. I’m doing the hands-on work and I’m purchasing a complete compatible donor wiring section/loom now (from Pick-A-Part or similar). Before installing it, I’d really like to sanity-check the approach with someone who knows these older Toyotas well. I’m hoping someone can assist in some practical guidance or if needed possible work. This could be reviewing photos, confirming likely causes of the no-crank, and advising whether full replacement versus targeted repair makes the most sense and if so possible assistance to help Happy to pay for phone advice, photo review, or general diagnostic guidance. Photos are available and I’m easy to work with. Thanks in advance, and please get in touch if you have solid experience with older Toyota electrical systems. Location is 19-33 Murray Rd, Preston VIC 3072

car trailer connection not fully working. some lights do but brake light isnt from connector

2005 Ford Transit restoration. I've completed about 90% of the wiring loom rewrap. At 64yo I'm having problems getting under the dash and into the engine bay. The Dash and instrument cluster have been removed to gain access to the loom at the back and under the dash. I need someone who can help finish the rewrap in electrical tape. ie. stronger back than mine. Will require getting under the van for things like horn, loom connectors etc. I estimate about 3hrs to complete. But willing to pay as required. Note: Anyone who is car minded and good with electrical tape should also apply.

I have a Holden Statesmen 1979, Need some wiring done to it

Can someone please come look at our car that’s not getting spark It has new spark plugs, new ignition coil, new battery and distributor has been tested with a working one.

Install led bar, dash cam

I'm looking for an auto electrician for guidance. I have all the bits to put in a dual battery system with inverter in the back of my Ute. I don't need an install, I just need a professional to chat to with in person to make sure I get it right and not start a fire 😅 should only take 30 mins or so. Bonus if you have a crimper for me to quickly put some ends on cables.

Door Speaker Circuit Diagnosis I have completed full fault-finding on the passenger front door speaker circuit and require an auto electrician to complete final diagnosis and repair. Diagnostics already completed: Correct speaker circuits identified and pinned at cabin-side loom Driver’s side tested as control and confirmed working Passenger side circuits pinned and tested No continuity present between cabin-side loom and door-side speaker wiring Speakers, crossover, amplifier and head unit all confirmed operational Fault isolated to passenger front door loom / door-to-body transition Conclusion: Circuit has been correctly pinned but fails continuity, indicating an internal break, terminal fault, or loom issue requiring proper auto-electrical diagnosis and repair. Not seeking audio installation or rewiring — looking for OEM-correct repair.

Nitro Vrx river Hobby N2 remote control car won't start. Anyone with knowledge I would like to pay for your time to bot only get the car going but learn( 1 hour of your time) being that the car is brand new it won't need parts just smarts