Find an experienced local architect in NSW

Need a architect to draw up plans for CDC

In a nutshell I need someone to come to the site and to come to our office and measure up both stories (roughly 400 m² of total floor). Then they just need to present us with their floor plan that we can use. That's all. If they are good at Sketchup, by all means they can do a Sketchup drawing of it but all we really need is a basic floor plan

Hi, I'm looking for an experienced renovation builder or contractor to provide an initial price estimate for a full renovation of a 2-bedroom villa/townhouse in Prospect, NSW. I'm currently considering purchasing the property, so I'd like to understand the likely renovation costs before making an offer. I can't provide the exact address at this stage, but further details can be provided if needed to arrange an inspection. The renovation would include: Complete kitchen renovation, including cabinets, benchtop, sink, tapware and potentially new appliances. Bathroom and toilet renovation, including new fixtures, vanity, toilet, shower and tiles. New built-in wardrobes for both bedrooms. New flooring throughout the entire property. Repainting all internal walls and ceilings. Replacing or updating skirting boards and internal finishes. Updating light fittings and switches where required. Any other general interior updates needed to make the property look modern and new. I'm looking for someone experienced who can either provide an initial estimate based on the scope above or arrange a site inspection to provide a more accurate, itemised quote. Please include in your response: Your estimated price range for the complete renovation. Whether you offer a free initial inspection and quote. Whether your price includes labour, materials, demolition and rubbish removal. Your availability to inspect the property in Prospect. Examples of similar renovations you've completed. I'm hoping to get a realistic idea of the total cost before proceeding with the property purchase. Thank you!

Looking for quotes for a draftsperson or capable architecture/building design student to visit our house near Rosebank and prepare accurate drawings of the existing house. We need: • A measured floor plan showing room dimensions, walls, doors, windows and verandas. • A roof plan showing the existing roof lines, pitches and relevant heights. • Ceiling heights recorded. • Drawings supplied as PDFs and editable files. We want a reliable starting point for planning future renovations and possible extensions. No renovation design or council submission is required at this stage. The property is approximately 30 minutes from Lismore and 30 minutes from Mullumbimby. You will need to attend and take measurements. Unsure of cost so I have put $300, looking to receive quotes. Please specify what your price includes, including travel, and share an example of similar work.

I’m looking for an experienced interior architect or designer to help plan the layout of my new allied health clinic in Wentworth Point, NSW. The clinic is currently an empty commercial space, and I need someone to design a practical floor plan showing where everything should go, including: * Treatment rooms * Bathrooms * Reception and waiting area * Kitchen * Gym and rehabilitation area I want a professional floor plan that makes the best use of the available space, along with realistic 3D visuals showing what the finished clinic could look like once built. The design needs to be practical, professional and suitable for an allied health clinic. I’m looking for someone who can help bring my vision to life and provide plans that I can use to guide the fit-out. Please include examples of previous work and your pricing when responding.

I require a draftsman to convert my drawings to meet inner west council requirements. I have had the Pre-DA meeting and need to draw what they have recommended. It’s 13m2 which has bedroom and ensuite. I have Survey, dwg files and structural drawings from a past renovation.

I’m building a duplex on Ramsay Road in Five Dock. I’m wondering what the cost of plans for a 1.8 metre wide 15 metre long front fence is. I have an acoustic report to support the application and plans for the current house that is being built. The fence construction will need to be submitted as a separate DA application. Im wondering if you can provide both the architectural drawings for council and the structural engineering certification for the masonry footings?

Need to submit a plan to the council for a driveway

I have an existing two-storey building in Arncliffe with approximately 39 rooms. I already have the architectural floor plans in PDF/CAD. I just need someone to attend the property, check and measure the existing layout, and update the plans so they accurately match what is currently on site. The job includes: Site visit and measurements Check and correct existing floor plans Update room dimensions/numbers where required Final PDF and editable DWG/CAD files No new design is required. I only need the existing plans checked and corrected. Please include your total price including site visit and examples of similar work if available

Draftsman or architect services needed to sketch a plan for partitions on a veranda for Cumberland council

Interiors architect / joinery craftspersons to finalise the design of several interior joinery projects and produce drawings for quotation purposes. Large laundry/ mudroom Walk-in pantry Kitchenette I have a general idea of layout and concept but would welcome additional "clever joinery" ideas. I need less help with the fixtures/colours/materials - it's the design of the actual joinery of which i need assistance. In order words I need assistance with function not the form. Site visit to Pymble is preferred to discuss design in person and confirm measurements. However, extensive building CAD documents from recent building and renovation are available to assist/ check measure.

proposed building. 5 bedroom home with 2 ensuite bathrooms and mainbathroom. 420 to 450 sqm home single level. northern aspect is essential for living and dinning areas. block of land area 1146sqm

Need an architect to design a balcony as part of renovation work to convert roofed patio to balcony.

Builder,tradesman,carpenter, anyone with knowledge and experience in the building trade, quote urgent for Garage Conversion Assessment worker to inspect an existing detached colourbond garage, with galvanised steel framing at property. Provide detailed quotation for converting safe, comfortable accommodation for my elderly father. Built on concrete slab. Electricity has been run to the garage but is not yet connected or fitted out. It will be a very minimal space. Nothing fancy all open with toilet and kitchenette. No shower needed. The proposed work may include: * removal of garage door,replacing with glass sliding door and screen door. * Assessing whether the existing garage structure and concrete slab are suitable for conversion * Waterproofing, drainage * Insulation and internal wall and ceiling lining * Electrical connection, lighting and additional power points * split-system installation * Flooring * Plumbing options for a toilet and kitchenette * Assessing whether an attached or external bathroom and kitchenette section would be more practical * Advising whether converting the existing garage or demolishing and replacing it would be the better option * Providing a detailed and reasonably itemised quote. I am home and available this week, but I will be returning to work next week; can be available during work given adequate notice. Not requesting a formal building inspection report, engineering report, certification or council approval to be addressed yet, however I am fully aware of what’s needed. Builders who normally provide free quotations will still be compensated for attending and taking the time to assess the project. Builders who charge please list your price.. many thanks Amy

I need existing/proposed floor plans redrawn for a Development Application re-lodgement, for an attic conversion (2016) at West Ryde. The works are already complete — 2 bedrooms + living area, staircase, structural steel beams, skylights. Council requires the plans to be to scale, with new work clearly coloured/marked, and a legend. I have old engineering drawings, a strata plan, a structural inspection certificate, and a BCA report available to share. Looking for a draftsperson experienced with DA/BIC regularisation of unauthorised works.

I am seeking an experienced Building Designer to prepare and sign architectural plans for a small commercial Change of Use CDC project in Five Dock. The premises is approximately 27.5 m² and will be used as a dog grooming studio with a simple internal fit-out and no major structural alterations. I have already engaged Beyond Certification as the private certifier. Beyond has confirmed that: The plans can be prepared and signed by a Building Designer An NSW registered architect is not required For the first review, they require the architectural plans and proposed fire safety measures Required scope: Professional on-site measure in Five Dock Existing and proposed architectural plans Proposed fire safety measures for the preliminary certifier review Dog baths, sinks, plumbing fixtures and hair-trap locations Preparation and signing of the plans as the Building Designer PDF and DWG files Minor amendments requested following Beyond Certification’s initial review The building already has an Annual Fire Safety Statement and Fire Safety Schedule, which will be provided. I also have an existing floor plan, proposed layout sketch, previous approval documents, photos, video and the certifier’s CDC Checklist. Timeframe: Initial drawing package required within 1–2 weeks. Please confirm: Your Building Designer qualifications and NSW commercial CDC experience Your earliest availability for the site measure Your fixed fee The number of minor certifier revisions included This is an urgent project, and I am ready to assign the right person immediately.

Looking for an architect to draw plans for a construction certificate. DA is approved. Plans are for an extension into attic and adding a deck off the kitchen. DWG files available. In person required, rather than remote.

I want to remove a load bearing wall. I require an architect to draw up my plans to submit to council for a CDC I have already had a structural engineer write up a report of what is required for the wall removal. I dont have existing house plans/ drawings as the house is heritage. I am trying to request through the council. CDC will be submitted to City of Sydney Council

Looking for someone experienced and detail-oriented to visit an apartment in Sydney and take accurate measurements of all spaces. Tasks include: • Measuring all rooms, walls, windows, doors, ceiling heights, and key areas • Taking clear photos/videos of the apartment • Providing detailed measurements in an organized format • Optional: simple hand-drawn or digital floor plan/sketch Requirements: • Attention to detail • Measuring tools required • Experience with property measuring/interior spaces preferred

Hi, I'm after a drafter to measure up my place in Balmain and put together a proper existing-conditions CAD set. It's a 2-storey heritage terrace, around 133m2 internal area. Completley empty with no furniture. What I need: - Site visit to measure everything up (laser measure, probably 2 to 3 hours onsite) - Full CAD set of the existing building, scaled and dimensioned Drawings I'm after (PDF + DWG): - Site plan with boundaries, footprint, RoW, shed - Ground floor plan, fully dimensioned - First floor plan, fully dimensioned - Roof plan (Approx from done video) - 4 elevations (front, rear, both sides) - 2 sections (one long, one cross) (potentially more on request) Dimensions need to cover all walls, window and door openings, ceiling heights, stair, fireplaces, ridge and gutter heights on elevations. Timing is flexible on the site visit, preferably 4pm weekdays or on weekends.