Find a professional disassembly service in Sydney

Beauty Expo Bump-In We are looking for someone practical, strong and confident assembling event furniture to assist with: Setting up and dismantling two 3m x 2.5m LED banners Assembly of x3 flat packs: x2 shelving units/bookcases and a cabinet/desk Moving boxes to and from storage Unloading stock, banners and boxes from the loading dock and/or car park Preparing gift bags and packing samples into envelopes and bags Assisting with a variety of other practical stand-setup tasks The role requires someone physically strong, hands-on and good at putting things together. Previous event bump-in and bump-out experience would be highly desirable. The most physically demanding tasks will be unpacking and repacking the heavier items and assembling the banners. you will need the following to be allowed into the ICC Sydney - High Vis Vest - Closed Flat-sole Shoes

Hi there I need help with two things. 1. Disassemble my king bed. It is the Alina winged bed from Freedom so there are instructions available online on how it goes together. See photos. 2. Balcony lift the bed head (which is too big for my stairs) from the balcony on the third floor (photo shows balcony it needs to be lifted from) to the ground floor (photo shows the ground level). There is a clear run from the balcony to the ground level - the tree does not impact it. The other items of the bed will go down the stairs. I’d prefer if this task could be done tomorrow but can be flexible as long as it’s done by 9am Saturday. Cheers Craig

1. Fanuli Bun Bed, Queen Bed disassembled 2. Move bed frame base, headboard and slats and mattress into my living room. 3. Move 2 small bedside tables into living room. 4. Ideally I would like the same team to come back to re-assemble the bed, and place mattress and sidetables back into the bedroom on Friday 7th August from 4pm. 5. Needs to be a 2 person job.

I need help with the following: - Disassemble kid’s single bed and move to spare room -Diassemble king bed from spare room, move to kids room and reassemble. King frame doesn’t need to be disassembled completely for move. Photos for reference. The last photo shows how close the two rooms are.

Disassemble & Move King Living Horizon King Gas-Lift Bed + Mattress Looking for someone experienced and confident with King Living gas-lift beds (or similar high-quality gas-lift bed mechanisms) to safely disassemble and move our King Living Horizon King Bed into the room next door. The job includes: * Safely disassemble the King Living Horizon king-size bed * Correctly remove/disconnect the gas-lift mechanism without damaging it — experience with gas-lift beds is essential * Move all bed components into the room directly next door * Move the king-size mattress into the next room * Cover/protect the bed components with a plastic bed/furniture cover once moved * Handle all upholstered components carefully to avoid marks, scratches or damage No stairs involved and the new room is immediately next door. The bed does not need to be reassembled at this stage - just safely disassembled, moved and protected. Please only apply if you are confident dismantling gas-lift bed mechanisms and have the appropriate tools. Experience with King Living furniture would be ideal. Thank you!

Please dissemble and reassemble 2 beds. Photos attached. Once you have dissembled the frames, the removalists will take the bed frames to new apartment and you can reassemble them. I need the dissembling to be done by 9:30 am as the removalists arrive then and you can assemble them in the new apartment:)

Take apart the ikea couch

Disassemble, Move & Reassemble: IKEA Furniture (MALM, ELVARLI, MITTZON, MARKUS) + Boxes Looking for a reliable, experienced person/team to disassemble, transport, and reassemble the following items. Local move within inner-west Sydney (Camperdown to Ultimo) — exact addresses will be shared once a tasker is assigned. Items requiring disassembly + reassembly at new location: 1x MALM Bed frame, high — white, 140×200 cm (Queen) 1x ELVARLI Wardrobe combination — white, 165×55×216 cm, open shelving/rail system 1x MITTZON desk/table — 160 cm wide, depth to be confirmed on-site (60 cm or 80 cm) Items to move (no disassembly needed): 1x Queen mattress — needs protective wrapping/cover for transport 1x MARKUS office chair — wrap/box for transport if needed 10x moving boxes (packed, ready to go) — just place in the new room, no unpacking needed Miscellaneous household items (specify: lamps, small items, décor, etc.) Scope of work: Disassemble MALM bed frame (frame, slats, headboard) and ELVARLI wardrobe at pickup location Confirm MITTZON tabletop depth (60 cm vs. 80 cm) before disassembly Keep all screws/fittings labeled and bagged per item for accurate reassembly Wrap mattress in a protective mattress bag/cover for transport Load all disassembled parts, mattress, boxes, chair, and misc items into a van/truck Transport to new address (inner-west Sydney, short distance) Unload and reassemble MALM bed, ELVARLI wardrobe, and MITTZON table at the new location Place mattress on reassembled bed frame Place boxes in the designated room — no unpacking required Access notes: Pickup: stairs — no lift Drop-off: lift access Parking available at both locations Preferred date: 24th or 25th of July (either works) Preferred time: Noon to evening Other notes: Own tools required (screwdrivers, Allen keys, moving blankets/straps, mattress bag) Extra care needed for ELVARLI's open shelving components Please confirm reassembly is included in quoted price

Require IKEA Disassembly: MALM Queen Bed Frame ALVDALEN Sofa Bed Website: https://www.ikea.com/au/en/p/malm-bed-frame-high-w-2-storage-boxes-white-luroey-s19175981/#content https://www.ikea.com/au/en/p/aelvdalen-3-seat-sofa-bed-knisa-dark-grey-80530642/

I have purchased some Qantas A380 Business Class Skybed II seats and need them partially or fully disassembled as they dont fit through my back door. I then need them reassembled once inside. Ideally looking for someone who works or has worked as an aircraft engineer or knows how to and has the tools to properly take the seats apart without damaging them.

Need an experienced handyman to disassemble an IKEA bed and a table in the living room, carry those upstairs within my apartment, and reassemble it in the upstairs bedroom.

Need double Bed disassembled tonight from 5pm

Disassemble IKEA Musken wardrobe as I am moving houses. Please keep all screws and nails from wardrobe as I will need to rebuilt it later. Will require screwdrivers, Phillip head and maybe a drill.

Need help to disassemble a bed frame (only)

Need to disassemble Koala Queens bed base for impending return. Also need to assemble the new Queen bed base.

We need a wardrobe taken apart on bottom level and then taken up one flight of stairs and rebuilt as it won’t fit up the stairs without being taken apart.

Assistance required to dissemble an IKEA bed frame and IKEA chest of drawers. Removal of pieces in not required

Just moved into a new apartment. Bed frame doesn’t fit into bedroom door. It’s in courtyard now. Need someone to disassemble it into smaller pieces, move it to bedroom and reassemble it.

Our trampoline has come to the end of its life! Need a person to disassemble completely and move to curb at front of property for council collection. Job must be completed on 15 April

ikea pax wardrobe (frame) that’s needs to be disassembled 236 tall x 100 wide x 60 deep