Find a professional dryer installation service in Belconnen

it runs only for a short while and then stops after about 20 minutes, but the clothes are still not dry

I'm looking for someone local and bored willing to help me with the odd jobs around the house Im unable to do on my own. Roughly 3hrs would be enough I think and with this price makes that about $60per hour.

Dismount an old dryer and put a new one

Install a brand-new Electrolux EDV 5051. Like for like replacement. 600mm x 600mm x 795mm Wall mount Remove old - replace new Dispose of Old (Bing Lee pre-arranged)

I need to internally vent the vented dryer to a condenser so that it doesn't vent moisture across my garage. However, a challenge is that the dryer is front vented and has a weirdly shaped duct hole that I can't seem to find the appropriate connector/adaptor or flexible tubing for. Appreciate if someone is able to work with me to identify the right parts and assisting me in installing this. Will pay for parts or procure them as you need it in addition to the budget for the task.

Our dryer is in the garage. Washing machine is in the laundry room.We need to move the dryer and place on top od the washing machine

Unpack the new dryer. Remove existing bracket installed to wall. Securely attach the new wall mount/bracket to wall (the wall mounting kit is supplied with the new dryer). Lift/Install the dryer onto the newly installed wall mount without damaging walls. Remove/dispose of the packaging and the old wall mount bracket. Approximate weight: 35kg. Appliance dimensions: 825 mm (Height) x 600 mm (Width) x: 578 mm(Depth) Please refer photos attached. Note: This job may require 2 persons to lift and hang the dryer in position on the wall mount due to dryer weight. When: Thursday 29/05/2025 at 8.30am or 9.00am (must be finished by 10.30am), or alternately 2.30pm (must be finished by 4.00pm). Please confirm preferred time.

The clothes dryer has been hung on a metal bracket on the wall above the washing machine. The clothes dryer needs to be taken off the wall, lowered down without damaging the wall or wall taps and then placed on the floor. This may be a two person task due to weight of the dryer.

New Fisher & Paykel clothes dryer which needs to be installed on a wall.

Fisher and Paykel Dryer model DE7060M, vented clothes dryer, need it to be wall mounted in European laundry, have the fittings that came with the dryer

I have a dryer I need mounted to the wall. I have the mounting bracket installed but need someone to - ensure bracket is ok - if not correct bracket mounting - mount dryer to bracket I can help..

Door on new Samsung Dryer DV80T5420AW reversed from right hinging to left hinging. Note: instructions in manual differ slightly from instructions on internet.

Need to wall mount a washing machine

Hi there I need someone who can dismount my old dryer and mount the new one. And take the old dryer away which still works.

Need a new wall fixture installed to hang a clothes dryer

Remove some existing screwed in shelf brackets if necessary and patch holes Locate studs and install wall brace Wall mount Dryer I have the brackets but not the screws

Check the wall to see if there are studs aligned to the dryer in my laundry Install brackets and lift my dryer and mount it. I have found the brackets but do not have the screws.

Haier clothes dryer, 6kg to be wall mounted in ensuite bathroom, please

We have a dryer that needs to be attached to a wall or other possibility.

I have the factory supplied wall mount attachments.