Hire trusted experts for dishwasher repairs in Perth

We're installing a dishwasher. Please add a dishwasher water supply outlet to existing taps, and a drainage port to existing sink drain. Licensed plumbers only thanks

Swapping dishwashers over, ideally unplugging and reinstalling

I’ve had an old oven removed from my kitchen and have purchased a dishwasher to go into the same space. The dishwasher does not currently fit because the existing cabinet opening needs to be modified. Dishwasher: Bosch Series 6 free-standing dishwasher, 45cm wide, model SPS6IKI01A Dishwasher dimensions: 845mm high x 450mm wide x 600mm deep It also has a 30mm removable worktop, so height may potentially be reduced to approx. 815mm if appropriate. Current opening is approx: * Width: 580mm * Height: 700mm * Depth: 546mm * Bottom of current opening sits approx. 115mm above the floor I need someone with carpentry/cabinetry experience to prepare the space so the dishwasher can slide in under the existing benchtop. The job may involve removing/modifying the white cabinet framing and raised base/plinth, keeping the existing benchtop in place, ensuring the benchtop remains properly supported, and adding a support panel/leg/bracket if needed. The underside of the cooktop/stove protrudes slightly into the space on one side, so this will also need to be checked as it may affect the dishwasher fit. Ideally, I’d also like filler panels/trim added on either side of the dishwasher so it looks more built-in, depending on what is practical within the budget. I already have a plumber lined up for the plumbing/water connection. This task is only for the cabinetry/carpentry preparation before the plumber attends. Please only make an offer if you have experience with kitchen cabinetry/carpentry modifications and are comfortable working around an existing cooktop. I do not expect any gas/electrical work to be done unless you are licensed. Please include in your offer whether filler panels/trim are included, or whether your offer is just to modify the opening and support the benchtop. Photos of the current space, measurements and dishwasher specs attached.

Was getting a water error message on my dishwasher. Was told I need a new aqua stop solenoid valve for my dishwasher. Have purchased a new one, and removed the old but not sure how to install. I have tried but still getting the error message.

under counter dishwasher won’t drain

Install a new sink and dishwasher

I need an experienced installer to remove an existing integrated dishwasher and install a new Bosch fully integrated dishwasher. The current dishwasher (ASKO) was poorly installed and appears to have been forced into the cavity, causing damage to the cabinet panel and adjacent cupboard. The original dishwasher (Miele) previously fit correctly, so the space should work with proper alignment. ⚠️ This is not a standard swap job. Scope of work: * Carefully remove existing integrated dishwasher (tight fit) * Install new Bosch fully integrated dishwasher (already delivered) * Attach and align existing cabinet door panel * Level and centre appliance properly * Ensure even spacing on both sides * Ensure door opens fully without rubbing cabinet * Do NOT force unit into cavity ⸻ Important (corner installation): This is a corner position, so door clearance and spacing are critical. A small adjustment (e.g. 10–15mm filler strip or repositioning) may be required to allow proper fit. ⸻ Looking for someone who: * Has experience with integrated dishwashers (not just freestanding) * Understands cabinet alignment and spacing * Is comfortable making minor cabinetry adjustments if needed Please confirm your experience with integrated installs when quoting.

Install new dishwasher in empty recess with already installed electrical and plumbing No existing dishwasher to be removed

Dishwasher is not working properly. Starts and completes wash but plates not washing. Have cleaned filter, run a clean through system but still no good

Fisher and Paykel dishwasher with F30 code. Have tried reset and tilted at 45 degrees.

I have disconnected and reconnected an aqua stop solenoid valve for my dishwasher but don’t have the tools/ strength to disconnect the old pipe from the water and reconnect the new one. Simple unplug replug job, just a bit hard to get to under the sink.

I need some extra holes drilled to fit the parts of my new dishwasher and to help me fit it

Miele dishwasher not draining. Rinse aid light on

Suspect the latching mechanism may be the issue, as cycles work when the door is pressed against without issue. Doesn’t appear to be an issue with drainage etc.

To pick up the dishwasher from the good guys in Osborne Park and to install it at your address.

Dishwasher drain pipe is leaking

Dishwasher showing code E4 and won’t run

Install my brand new dishwasher, and double check sink pipe for leaks

Dishwasher drain blocked. Miele G 641 plus. Need it to be unblocked, free today or tomorrow arvo

Need some cabinetry panels removed to make room for a dishwasher. Dimensions are: Height 815 mm Width (mm) 598 mm Depth (mm) 573 mm