Hire trusted experts for dishwasher repairs in Brisbane

Toilet seat need fixing and we would like to install a dishwasher

Dishlex dishwasher drain hose leaking at the end of the cycle. Model number DSF6106W

I have an old Solt dishwasher to be removed and a new Solt dishwasher to be installed in West end, Brisbane, preferably this weekend.

The inlet drain light keeps flashing and it won't run its cycle

Requesting dishwasher installation. The dishwasher will be dropped off earlier in the day so just needing someone to connect it up - see attached photos.

We have a dishwasher that leaks while operating - not sure what is wrong. Brand is Solt, and its a pretty basic one.

Keep draining not filling up water

I need some to install a dishwasher in my kitchen. It needs to be fully installed so requires a plumber etc

The dishwasher drain is not draining water. The filter and the pipe are clean.

I ran the dishwasher on the “Intensive 65°C” cycle, but the dishes didn’t come out clean, and there was a large amount of water left inside the machine after the cycle finished. Now, although the indicator lights are on, the machine is not responding to any button presses or starting a new cycle. And the water at the bottom is still not draining.

Need to fix my dishwasher says it’s got a fault

Have a new sink, need water connection to the tap as well as waste pipe install. Also waste pipe install for dishwasher. The water supplies might need taps to be installed

Need someone to install dishwasher

Need a sink and dishwasher connected to the drain and a tap installed. Only after 2pm possible. Parking onsite

Need a plumber to lower this pipe as close to floor wall corner as possible; install T pieces or similar for dishwasher inlet; connect dishwasher waste water pipe to U piece; connect all cables and pipes and slide in dishwasher. Clean job, plenty of working space. Only one elbow required on left side as pipe flexes down on the right. Hole already cut to pass thorough pipes. We have plenty of ongoing work.

i there, I need someone to take a look at our commercial dishwasher (Washtech XU model). The water temperature is sitting around 55°C, but it should be reaching 65°C. Because of this, the machine keeps stopping mid-cycle due to low water temperature. I think. Looking for someone experienced with commercial dishwashers who can diagnose and fix the issue. Please send through an offer if you’re available. Thanks!

Need to reattached the door panel for the dishwasher.

I need to access the water supply for my dishwasher but I can’t get it out of its cabinet. May require tools as well as strength

Our dishwasher water tap is not pushing the water, lever seems to be faulty

Hi, I need to get the existing outlet hole in the cabinet to a larger size in order to install new dishwasher. The filter from the dishwasher will not fit through the current hole due to small size. So the hole in the cabinet and under the current dishwasher space needs to be made bigger size.