Find a reliable cooktop installation and repair service in North East Melbourne

I have an old 54CM UPRIGHT FREESTANDING COOKER that needs to be installed at my alfresco. No existing gas line at place, need to so some adjustments at the area.

Hi, I need a licensed professional to manage a cooktop upgrade in my kitchen.The job consists of three parts:Gas Disconnection: Safely turn off the gas supply and decommission/remove my existing 90cm gas cooktop.Stone Benchtop Cutting: My existing engineered stone benchtop cutout is currently 830mm wide. I need it widened by a total of 30mm (cutting exactly 15mm / 1.5cm off the left side, and 15mm / 1.5cm off the right side). This must be done using proper wet-cutting safety equipment to comply with crystalline silica dust regulations.New Installation: Drop in and connect the new 90cm cooktop. Connect the gas line safely and plug the standard 10A ignition lead into the power socket under the bench. Requirements:1, Must be a licensed plumber/gas fitter and provide a Gas Certificate of Compliance when done.2, Must have proper stone-cutting tools and dust extraction equipment to work safely with engineered stone.3, Disposal of the old cooktop.

I’m looking to replace my gas cooktop with electric induction one and require a licensed electrician to put a 32amp wiring in a single storey tiled roof house. The old gas stove model needs to be removed and replaced with my newly purchased 7K watt Mistral cooktop. The existing gas connection has been capped and meter switched off.

I’m looking to replace my gas cooktop with electric induction one and require a licensed gas fitter to disconnect and remove existing gas cooktop, permanently cap off the gas line safely, and perform a full pressure leak check. I need VBA compliance certificate for capping and decommissioning the gas line after completing the work.

Cook need repair/ replacement

Licensed Gasfitter Required: Swap Gas Cooktop. I will provide cooktop.

I need a licensed plumber to replace my 90cm cooktop with a new one. Please offer a fair price as I will need plumbers soon on my new home as well.

Oven cooktop only 2 out of the 4 working ( Smeg)

Looking for someone to come have a look at the two cookers that’s not working. The gas is working but the flame isn’t working to cook on. Plz see pictures.

need someone to change the gas valves on the cooktops

Install a new gas cook top. I have a goos cook top installed but I am replacing that with brand new one. No drilling/cutting etc required as it is the exactly the same.

We are replacing the Cooktop and need to cut the benchtop slightly larger to fit the new cooktop. It is a 20 mm man-made stone benchtop.

Looking for a licensed gas fitter/plumber to install a new Bosch 90cm natural gas cooktop. (please quote your price). What’s already done: * ✅ Stone benchtop has already been cut to the correct size. * ✅ Cooktop is brand new and on-site. * ✅ Gas connection is inside the cabinet (see photos). * ✅ Power outlet is available. Task includes: * Install and secure the new Bosch cooktop. * Connect to the existing natural gas line. * Test all burners and check for gas leaks. * Ensure installation complies with Australian standards. Please bring any standard fittings or connectors that may be required (if not supplied with the cooktop). Location: South Morang, VIC

The old cooktop died out of warranty. The new one needs an electrician to connect it. It's a Bosch cooktop and the house was entirely rewired 2 years ago so it should be straightforward.

Run 25A wiring underfloor, single story, brick, good access under floor Approx 10mt run There's a spare spot on the switchboard for the new breaker Under bench access for necessary wiring

My old gas cooktop needs to be replaced by a licensed gas fitter. I need the installation certificate.

Hi there,I need a licensed professional to do a straight, like-for-like swap of my existing built-in kitchen appliances. I am replacing an electric built-in oven and a separate gas cooktop. Both units fit standard 60cm openings, and the new ones will slide straight into the existing cutouts (no cabinet or benchtop cutting required).

Remove broken cook top and install new 90 cm Electrolux gas glass cook top. Needs to be by a licensed plumber .

I'm looking for someone experienced with gas ovens to inspect and repair my Royal Coordinate Series (Chef) gas oven. The cooktop burners are working perfectly, so the gas supply to the cooktop appears to be working fine. However, the oven itself will not ignite. It hasn't been used for a long time, and when I recently tried to use it, I turned the oven control knob and attempted to light it with a long gas lighter, but it didn't ignite. I'm not familiar with operating this older gas oven, so it's possible that I'm simply missing the correct ignition procedure rather than there being a fault. Before I engage someone for a repair, I'd appreciate it if you could let me know if there are any basic troubleshooting steps or preliminary checks I can safely perform (for example, whether there's a safety lever, ignition sequence, or gas control that needs to be operated). If the issue can't be resolved through these checks, I'd then like someone to inspect, diagnose, and repair the oven. If a visit is required, please let me know: Your call-out fee. Your estimated repair costs (where possible). Your experience working with older gas ovens. Photos of the oven are attached.

I have purchased a WESTINGHOUSE 60cm Induction Cooktop WHI635BE from Good Guys to replace a current gas cooktop. I have measured cut out of current gas cooktop which is the same. Need a gas plumber + electrician to disconnect gas connection and install new cooktop. No modifications to benchtop expected. The current gas cooktop is plugged into a standard electrical outlet underneath it. Must provide appropriate Certificate of electrical safety.