Find a reliable cooktop installation and repair service in Inner South West Sydney

Gas Cooktop Installation – Licensed Gas Fitter Required I need a licensed gas fitter to remove an existing gas cooktop and install a new one. Details: • Gas type: Natural gas • Cooktop size: 60cm • Benchtop: Stone • Cut-out: Same size, no modification required • Existing gas connection in place Requirements: • Must be a licensed gas fitter • Must provide Gas Compliance Certificate • Leak testing required

One of the gas stove control knobs is stuck and does not turn. Additionally, one of the burners is not igniting because the spark is not reaching the gas. The burner does not light and may require inspection or repair of the ignition mechanism.

We are replacing our kitchen benchtop on Monday 16th February and we need a qualified electrician to remove the kitchen electric cooktop before this date on Friday 13th Feb. We then require the same kitchen cooktop to be re-installed on Monday 23rd Feb after the kitchen benchtop has been replaced.

We are replacing our kitchen benchtop on Monday 16th February and we need a qualified electrician and qualified plumber to remove the kitchen electric cooktop and kitchen sink before this date on Friday 13th Feb. We then require the same kitchen cooktop and a new kitchen sink to be installed on Monday 23rd Feb after the kitchen benchtop has been replaced.

Electrician to replace cracked induction cooktop with already purchased 2nd hand replacement, most likely need hardwiring. Cooktops dimensions should be the same.

Removal of the existing damaged cooktop and supply and installation of a new Bellini 60cm Ceramic Cooktop, including all required fittings, testing, and ensuring the unit is fully operational and compliant with safety standards. I have ordered a new one today 08/01/26 not sure when it will be delivered. Photos are existing stovetop which is damaged. I have the new one in box ready to be installed.

Have a free standing one already has need taken out the. I have a smeg one to be put in but my electric cooktop I have with it is to big so need a 60cm one

Remove existing gas / LPG cooktop, size 60x60CMS, Install a new supplied cooktop of the same size, (LPG conversion kit to be installed and tested). Email or text message replies preferred.

chef electric oven and cooktop when power on then breaker fall straight way with a pop sound from oven, model chef CFE532WB

Replace a 5 burner new gas-stove cooktop. Existing gas connection in place with old cooktop - see photos. New cooktop supplied. Like-for-like size 860mm length & dims. You must have gas plumber licence to disconnect old & fit new cooktop. I require work done soon. Mon 29th to Weds 31st.

I'm replacing an old electric cooktop with an induction cooktop. I've disconnected the old cooktop.

Cooktop problems they wont infinite themselves but only with lighters , Smeg is the brand name .need troubleshooting and fixing

Replace gas cooktop by licensed plumber and replace sink plug. I have cook top but I don't have sink plug.

Remove an existing gas cooktop (60cm) and install a new one . The new cooktop to be installed is a 60 cm Westinghouse WHG644SC. Gas type at the property is natural gas.

Gas cooktop improperly fixed to bench and moves around. Need licensed tradesperson to come and fix installation.

I need a licensed electrician to install a new dedicated 32A circuit for an induction cooktop. Electrical scope: • Run a new 32A circuit from the main switchboard to the kitchen • Approx cable run: 15 metres (single-storey house, tile roof) • Supply & install cabling • Terminate into a hardwired connection for the induction cooktop • Test and certify the circuit Cooktop model: Bosch 80cm induction (hardwired, 32A requirement)

Install dedicated circuit for a cooktop. Replace 3 lights with bayonets

Replace a 60cm gas cooktop with a new 60cm kogan gas cooktop. Simple swap out job.

My old gas cooktop has stopped working properly. I have purchased a replacement and need someone remove the old and install the new one (as pictured in box). The old cooktop igniter has stopped working - however given its old and dirty i want to replace the whole thing. I can use a lighter to get the gas burning and gas flow is perfectly fine. Should mean no other parts require servicing. Must dispose of the old one also.

Need a new fan installed above stove .