Find professional lock installation in Melbourne Eastern Suburbs

Two outdoor locks on a gate need replacing and one indoor lock need a tweak

We need a new smart lock installed in the main front door. I'm yet to decide what kind of lock, but it'll be one of those smart locks available from Bunnings, nothing out of ordinary. Photos of current lock attached.

Need to install a door lock. I already have a lock bought - Ikonic Brushed Nickel Ruby Entry combo set. Need to remove old knobs and install this one without damage.

Replace the old door with a new door and install a handle and deadbolt lock

I need a Philips EasyKey DDL615-5HBS smart handle lock (from Bunnings) installed on my front door. Scope. :- • Remove the existing handle/lock • Fit the new lock, including any mortising, drilling or chiselling needed so it sits flush and latches cleanly •Adjust the strike plate so the door closes and locks smoothly •Test fingerprint, PIN, key tag and mechanical key operation • Take away the old hardware and packaging (or leave it, either is fine) Door photos are attached.

Good day. We would like to install a lock for this door. We would prefer a sliding barn door mortice lock. Please see the attached photos. Thank you.

I need to install a doorknob lock on my bedroom door

Install deadlock per photo. Have already bought deadlock from bunnings

Locksmith re-key front door lock urgently today My house key was accidentally left in a car that has subsequently been stolen. I need my existing front door lock re-keyed/changed so the stolen key will no longer work. Hawthorn. Sunday. Please quote your total price including call out, labour and parts, and confirm you are a licensed locksmith.

Description I need a locksmith/experienced door hardware installer for 2 jobs: 1. Bedroom door – install a keyed door handle/lock and latch. I already have the keyed handle, but it may require some drilling/modification to suit the existing mortise/latch setup. Happy for you to recommend a more compatible handle/latch if that makes the installation simpler and cheaper. 2. Linen cupboard – install a Delf Satin Nickel Low Profile Square Single Cylinder Deadbolt from Bunnings. The cupboard door is approximately 35 mm thick. Please fit the deadbolt and strike neatly into the existing cupboard door/frame. Looking for a clean, professional installation with minimal unnecessary modification to the doors. Location: Kew. I can supply the hardware, or happy to discuss what you recommend before the job.

Need to install deadlock https://www.bunnings.com.au/lemaar-satin-chrome-round-flat-deadbolt_p4062588?store=6402&gclsrc=aw.ds&gad_source=1&gad_campaignid=21122993677&gclid=Cj0KCQjw2OnUBhC2ARIsACKyfaEjDZD8x1-zP2TnkUGqbKVcK-1_zJa4H62NWtjKvWIqmbN3FnmMPIgaAjYEEALw_wcB

Looking for an experienced locksmith/electronic lock installer to assess and install a Codelocks smart lock on a solid timber front door in Kew. The property is occasionally rented short-term. I need: * time-limited guest PINs that expire automatically * no Wi-Fi/internet required at the property for entry * mechanical key override for the owners * permanent owner access * preferably Codelocks NetCode I’m considering the CL5020 NetCode, but I’m open to a simpler/cheaper Codelocks model if it meets the requirements and fits the existing door cleanly. The door currently has a mortice lock with Euro-profile cylinder. Photos of the door, lock and strike are attached. Before I order the lock, please confirm compatibility, whether the existing mortice/strike can be reused, and your recommended Codelocks model. Please mention if you have experience installing Codelocks/NetCode locks.

Remove smart lock and replace with new model (i will supply one of the two pictured).

install a dead bolt smart lock to my existing door https://www.amazon.com.au/ULTRALOQ-Fingerprint-Keyless-Deadbolt-Control/dp/B0DQTS49TW?pd_rd_w=Z2Cfb&content-id=amzn1.sym.d7d187f6-5120-4884-a08a-7ee049fa0556&pf_rd_p=d7d187f6-5120-4884-a08a-7ee049fa0556&pf_rd_r=Y09JPYYK2G6KM0N88X9R&pd_rd_wg=qx9ow&pd_rd_r=80c1afe3-3a4d-4df3-8fba-08a72a47d044&ref_=sspa_dk_detail_sbt_img_0&sp_csd=d2lkZ2V0TmFtZT1zcF9kZXRhaWxfdGhlbWF0aWM&th=1

I need someone to repair the lock on my sliding glass door. A previous handyman removed the lock parts during another repair and unfortunately lost them. The following parts are missing: * Lock cylinder/barrel * Square spindle (the metal bar that connects the inside and outside handles) Please inspect the photos and supply any additional parts required if needed. I would like the door lock restored to full working order with keys. Please include in your quote: * Supply of all required parts * Installation * Keys * Confirmation that the lock will be fully functional after the repair I’ve attached photos of the existing lock. If you need any additional photos, please let me know.

As noted I need two locks replaced.

Replace door lock with smart lock

Remove exisiting lock on our front door and replace / install the Aqara Smart Lock U400 Kit. The exisiting push handle will need to unscrewed and moved up slightly to accommodate the new smart door lock. Patch and paint accordingly.

I have an Aqara Smart Lock U100 that I’d like installed on my front door. The door currently has a standard lever handle lock only, so a new deadbolt hole will need to be drilled. What I need: • Assess the door and install the Aqara U100 deadbolt • Drill required holes and fit strike plate/hardware as needed • Ensure the lock works properly mechanically after installation What I’ll supply: • Aqara Smart Lock U100 (brand new in box) Good to know: • Existing lever handle will remain unchanged • Please include any smart lock or locksmith experience in your offer Location: Bulleen

I need to remove a lock lever and replace with a passage lever set for an inside door. Replacement is already purchased and ready.