Hire a professional home theater service in Blacktown

Need tv wall mount and installation Tv size 75”

Hey yall! I require my 40” TV Wall Mounted in Bedroom In search of someone experienced to mount a 40” TV in my bedroom. The TV will need to be mounted on the side wall next to my bed as that’s pretty much the only space available in my room. So, technically I require a full-motion wall bracket that can extend, retract and swivel to allow comfortable viewing from bed. I have attached photos of the wall and the type of bracket I am looking at purchasing. The bracket has not yet been purchased, so if you have recommendations or can supply a suitable bracket, please let me know. Wall is plasterboard/gyprock and will need to be mounted securely into studs where appropriate. Please ensure the TV is level and safely installed. Thank you ☺️

Hisense Q6SAU 65 inch TV to be mounted on brick/concrete wall. I have the mount.

I am looking for an experienced TV technician to diagnose and repair a 55-inch Hisense 55P6 television. Fault symptoms: Red standby light is on and stable. TV does not power on using either the remote control or the physical power button. No image on screen. No startup sounds, clicks, or other signs of booting. TV is approximately 7 years old. Based on preliminary troubleshooting, the likely fault appears to be the main board and/or power supply board. I'm trying to assess if the TV is worth repairing or I'm better off buying a new one. So please provide a quote that includes: Diagnosis and repair labour. Supply and installation of a replacement main board (new or refurbished – please specify). Supply and installation of a replacement power supply board (new or refurbished – please specify). Whether the quote is fixed-price or subject to further inspection. Photos and additional information can be provided upon request.

Looking for an experienced installer to wall mount a new 65" LG tv. The TV will be unboxed and completely ready on the floor when you arrive. No unboxing, packaging disposal, or internal cable hiding/routing is required. The cables will just hang down normally. I have already purchased a wide-span TILT wall bracket that spans across two studs. The wall is standard plasterboard over internal METAL studs. I am not sure if the screws provided in the tv mount package are wood screws or are suitable for steel tracking on studs. Since you are the expert, I would need you to tell me the appropriate hardware (heavy-duty metal stud anchors or screws or toggle bolts etc.) to procure. I will get them from Bunnings and return if unused. Pls let me know if you have any questions. Thank you..

Hi looking the quote for professional installtion and calibration cost of 5.1.4/5.1.2 in wall n ceiling speaker system including projector and screen installation. Audio cables/hdmi have been run during construction but need to be checked if the are enough or in suitable location. You can charge me the cable/hdmi cost as per what you used. I have predominantly all in wall/in ceiling setup. Projector will be ceiling mounted with LCR behind the new AT screen. Let me know your best price, thanks. Sai

Scope: * Assemble and wall mount a 110” fixed-frame projector screen. * Install ceiling mount for Epson EH-TW5600 projector. * Install a ceiling power point for the projector * Mount, align and configure the projector. * Conceal cables where practical. * Test everything before completion. I will provide: * Projector * Ceiling mount * Screen

Need tv mounted to wall 75” Plus a 40” tv mounted to another wall Both need brackets

I need a 75” tv hung on the wall

Get a TV wall mounted and get the existing holes closed if they are of no use

Tv wall mount 85 inch on a wall with steel studs

85 inch tv mounting required

Need two TVs to be wall mounted. Wall has been reinforced. Require supply of brackets for both TVs. If you can check Ethernet port function for me as well I'll pay a bit more

Hi, Supply and install wall TV mount for TCL 65 inches TV. Please provide your availability as well. Thanks

Wired cctv installation at home. It's double story house. Wired already done from the house wiring time by electrician. and I bought new NVR Poe cctv, 6 camera and monitor. Just need to be crimping the ethernet cables, fix the cameras and install the system with monitor. 3 wire can see outside and 3 maybe taken from downlight hole. I have diagram.

I need 2-3 power points added to a few rooms and a 50 inch TV hung on the bedroom wall.

I’m looking for someone to install an RJ45 (Ethernet) and TV antenna wall plate as shown in the attached photos. Details: Existing Ethernet and TV coax cables are already in the wall Open wall cut-out needs a proper dual wall plate installed Install and terminate: 1 × RJ45 data point 1 × TV antenna point Wall plate must be supplied by you, as I’m unable to source the correct plate from local stores such as Jaycar or Bunnings Wall plate to be flush, secure, and neatly finished. Please include supply of the wall plate in your quote Notes: No new cabling required, termination only Location: Schofields, NSW

Looking for a licensed electrician to do the following work in a house in Rivertstone, NSW: 1. Move the existing double power point and TV/data plate (see photo) vertically down to near skirting level on the same wall in the Living room and Bedroom. 2. Install an additional double power point in the pantry (same level as benchtop/power height, confirm on site). 3. Install a TV wall mount bracket in the living room and mount the TV on the wall, including hiding cables in the wall cavity where possible. Adding/modifying power and antenna/data points behind the TV if required for a clean look. I have got the wall mount brackets (Vogels 40-110" Fixed TV Wall Mount TVM5705)

Need to find the stud, support on a wood Panel wall and wall mount 85 inch TV I have the Sanus Advanced Tilt 4D Premium TV Wall Mount