Find a professional heating and cooling technician in South East Perth

Relocate 3 x split type Fujitsu aircond (need quote)

My LG central air condition won’t start. When I turn it on it only comes up with the code: CH 67 when I googled it, it said this was due to something in the air vents that may be blocking the air but I checked and there was nothing. I also restarted it from the main switch but it didn’t do anything to help it. Is someone capable of fixing this issue?

I need to get installed a Braemar Evaporative Air Conditioner LCQ450 system by replacing the existing service

I have an old split system that needs to be replaced. Brackets and isolator switch are in place. I have a Kogan 2.6 kW system I have ordered and needs to be installed. Should be very straightforward installation.

Samsung 5kw split air conditioner need to install

Old unit 7kw removed and decommissioned new unit installed.

I want to relocate 1 of the ducted aircon outlet. Patch up the old hole and paint.

Hi team, got the error code 97 on the screen, thanks

There is 4 indoor split system needs to be installed in Kelmscott three 3.5kw n one 7 kw. Supply and install Carrier-compatible outdoor multi-split(s) to suit 3 × 42QAG035N8 and 1 × 42QAG070N8. Provide dedicated RCBO-protected circuit(s) to outdoor(s), size cable & breaker per MCA/MOP and installation method; install lockable isolator(s) at the outdoor(s). Run refrigerant lines to each head using the sizes above (reducers only if approved), interconnect/control cabling per Carrier spec, and condensate drainage (pumps where needed). Confirm maximum line lengths, height differences, and any additional refrigerant charge per Carrier manual. Perform a maximum-demand calculation for the dwelling and advise if the switchboard/main supply needs upgrading based on switchboard picture attached Indoor 42QAG035N8 Operation Type Reverse Cycle KEY FEATURES Capacity 3.50KW Cooling Capacity / 3.75KW Heating Capacity Dimensions [H x W x D] mm 295 x 802 x 200 Net Weight (KG) 8.5 Airflow Cooling (l/s) 86 Airflow Heating (l/s) 147 Liquid Pipe Size mm 6.35 Gas Pipe Size mm 9.52 Indoor 42QAG070N8 Operation Type Reverse Cycle KEY FEATURES Capacity 7.00KW Cooling Capacity / 7.60KW Heating Capacity Dimensions [H x W x D] mm 337 x 1082 x 234 Net Weight (KG) 13.3 Airflow Cooling (l/s) 169 Airflow Heating (l/s) 302 Liquid Pipe Size mm 9.52 Gas Pipe Size mm 15.90

Reverse cycle air conditioning requires service

Install Kogan Aircon and remove existing LG aircon - single story house

Needing air conditioning serviced..condenser and evap coils to be cleaned and replace filters. Having persistent issues with heating and cooling. In summer it was cooling but not like others it wasn’t cooling best and in these days even when put on hight temp its not warming well. Unusual to see this much water coming from the outside unit so will definitely need a service. Pretty set on price, have a small budget.

We will pull out this old AC unit and want to fill in the hole with bricks that match the exterior red bricks. Inside to be bricked, then rendered so it can be painted,

Supply and install zone control motor for air con. Image is attached. Previous motor is removed.

Fujitsu Split Air conditioner turns on but not blowing air and the compressor not working. Icons on the panel are flashing and the manual states to contact a technician. All ground floor, easy access.

Aircon not working even when the remote is working

Fit x2 split system air conditioners Kogan brand

9 kw air conditioner teco, split system installation needed, house ground floor, back to back installation needed Photo attached,

The tenants have reported a zoning issue with the ZoneTouch 3 control panel. When selecting individual zones (e.g. Family, Lounge, or Bedrooms), the system appears to distribute airflow to all rooms simultaneously rather than isolating the selected zones. They have attempted to resolve the issue using the user manual but were unable to find a solution. It appears the zoning functionality is either not responding correctly or is being overridden, resulting in unwanted airflow to non-selected areas. We would appreciate it if a technician could inspect and resolve the zoning functionality to ensure the system operates as intended