What is Airtasker?

Post your task

Post your task

Tell us what you need, it's FREE to post.

Review offers

Review offers

Get offers from trusted Taskers and view profiles.

Get it done

Get it done

Choose the right person for your task and get it done.

Recent Fitness Equipment Installation tasks in North Sydney

avatar-url

Hanging 2 fans in gym floor

St Leonards NSW, Australia
14 Feb 2019
$100

Needing to install 2 wall mounted fans in our clinical/gym floor. Wanting to install white conduit casing for the power cords.

avatar-url

Installing outdoor gymnastic bars

Lane Cove NSW, Australia
25 Dec 2018
$150

Hi, these gymnastics bars need to be assembled and concreted into the ground. They are currently in a box

Max did a great job. We hit a little hiccup discovering some sandstone that we had to cut through - but he found a solution for that and finished the job well. Would definatrly recommend
avatar-url

Office Gym Installation

Chatswood, New South Wales, Australia
23 Dec 2018
$300

I have a force gym workstation all ready in my office to setup. Need an experienced installer to setup along with one of my staff member. It has a lot of parts and needs to be done right the first time all tools etc. are supplied. It's from what I believe a 4 -way workstation type setup. Previous gym or equipment similar set up and installation experience favoured upon $100 for what I estimate 2 hours work

avatar-url

Gym Equipment Assembly

Artarmon NSW, Australia
1 Nov 2018
$200

Need somebody to assemble a Technogym Leg Extension machine & assist with shortening the cables on a dual pulley lat pull down machine. Expertise required, experience preferred. Urgent. Have exploded diagram and tools.

avatar-url

Install rubber gym mats in fitness studio

Northbridge NSW, Australia
6 Oct 2018
$150

Small fitness studio over 2 levels, looking for someone with experience installing a series of thick square rubber gym mats onto the floors. This will involve cutting some to fit neatly. Would also need some help to move existing equipment off floor and then back again once mats are done.

avatar-url

Small Electrical Tasks In Gym In Artarmon

Artarmon, New South Wales, Australia
27 Aug 2018
$280

Need to mount TV to front reception desk wall; make sure cables at desk are neat and tidy using conduit; mount sensor light on front entrance.

avatar-url

Oxy welding piece of gym equipment

Turramurra NSW 2074, Australia
9 Jul 2017
$40

I am looking for someone to oxy weld a piece of heavy duty gym equipment back together. The job must be done properly as the weight machine needs to be capable of shifting 200kilograms. See pictures of gym equipment attached which is located in Turramurra 2074

avatar-url

Electrician wanted for odd jobs around 24 hour gym

St Leonards, New South Wales, Australia
23 Mar 2017
$120

Need the following done: - fan in bathroom fixed - self timer button added for an iron in changing rooms - ironing station attached to wall

avatar-url

Assemble Home Gym

Northbridge NSW 2063, Australia
18 Jan 2017
$200

Looking for someone to assemble the following for our home gym: - Power rack with dip bar - Weight plate rack - Load the plates onto the weight plate rack (250KG total of plates) - Put the barbell onto the power rack Everything arrived in boxes, so you'd need to unpack and also bring your own tools. I'd normally do this myself but I've pulled a muscle in my lower back so unfortunately can't lift anything over 5kg.

Job done perfectly and a genuinely nice guy. Thanks for your help and good luck with everything 👍
avatar-url$150

Needs kids play gym putting up. Also will need some of the wood to be reinforced with new wood frame.

avatar-url

Assemble Gym Smith Machine

St. Ives NSW, Australia
13 Feb 2019
$200

Need someone with experience to assemble this all-in-1 gym Smith machine.

Thanks so much you did a great job assembling the gym set. Super friendly and would highly recommend. 👍🏻
avatar-url

I need home gym assembly

Willoughby NSW, Australia
24 Dec 2018
$200

Assemble new gym in bedroom

avatar-url

Assemble gym equipment in Pennant Hills

Pennant Hills NSW 2120, Australia
19 Nov 2018
$200

I am after someone who is handy, has their own tools and experience assembling fitness equipment to assemble the below: Functional Trainer (Smith / Cable Machine) Hyper Bench Adjustable Bench Dumbbell Stand Estimated time from manufacturers is a 3 - 4 hours, photos attached. Availability after 5PM on weekdays, all day Saturday or Sunday afternoon.

avatar-url

Urgent Gym Equipment Assembly

Artarmon NSW, Australia
31 Oct 2018
$200

Looking to assemble a leg press, leg extension, last pull down & GHD. Need help & expertise. Experience required.

avatar-url

Assemble elliptical gym equipment

Greenwich NSW, Australia
2 Sep 2018
$100

Hi ATs I have a new elliptical that needs assembling.... all unboxed and ready for you to do your stuff. Please see pics attached... if you have any questions please let me know...

avatar-url

Lay gym floor

Artarmon NSW, Australia
2 Aug 2018
$1,000

Have 240sq m of gym flooring (1m x 1m x 15mm rubber tiles) that I need covered professionally. Outside tiles to be glued and inside tiles to be laid flat & potentially cut to cover the space perfectly. Floor is clean and ready to go.

avatar-url

Paint walls in our gym

Cammeray, New South Wales, Australia
17 May 2017
$300

I would like a quote for doing 1 coat of white paint on our walls in our gym in Cammeray (near North Sydney). No ceilings required. Must be able to do on a Saturday after 11.30am so it has time to dry for business on Monday.

Excellent job. Turned up on time and did job quickly and professionally.
avatar-url

Install 4 air vents in bathroom door sin gym

St Leonards, New South Wales, Australia
15 Feb 2017
$120

[Content Moderated] St Leonards - looking for someone to cut and install new vents in bathroom doors to improve ventilation. Will provide materials

avatar-url

Disassemble and remove home gym

South Turramurra NSW 2074, Australia
27 Dec 2016
$50

Disassemble and remove a Weider 1120 home gym. You can either keep it or take it to a scrap metal place. They may even offer you a few dollars for it. It's currently in a shed and while there's a small chance it might just squeeze through the door in 1 piece I suspect it'll be easier to disassemble it. Also, it would be a 2 person job moving it in 1 piece.

David did a great job and was a pleasure to deal with. I'd definitely recommend him.

Need someone to take apart this kids play gym and transport 1km away and put back up. Must be done this week by Sunday 30th. Do not bid if you can't do it this week. You must bring tools to take apart and put back up and have a vehicle to transport

avatar-url

Hanging 2 fans in gym floor

St Leonards NSW, Australia
14 Feb 2019
$100

Needing to install 2 wall mounted fans in our clinical/gym floor. Wanting to install white conduit casing for the power cords.

avatar-url

Assemble Gym Smith Machine

St. Ives NSW, Australia
13 Feb 2019
$200

Need someone with experience to assemble this all-in-1 gym Smith machine.

Thanks so much you did a great job assembling the gym set. Super friendly and would highly recommend. 👍🏻
avatar-url

Installing outdoor gymnastic bars

Lane Cove NSW, Australia
25 Dec 2018
$150

Hi, these gymnastics bars need to be assembled and concreted into the ground. They are currently in a box

Max did a great job. We hit a little hiccup discovering some sandstone that we had to cut through - but he found a solution for that and finished the job well. Would definatrly recommend
avatar-url

I need home gym assembly

Willoughby NSW, Australia
24 Dec 2018
$200

Assemble new gym in bedroom

avatar-url

Office Gym Installation

Chatswood, New South Wales, Australia
23 Dec 2018
$300

I have a force gym workstation all ready in my office to setup. Need an experienced installer to setup along with one of my staff member. It has a lot of parts and needs to be done right the first time all tools etc. are supplied. It's from what I believe a 4 -way workstation type setup. Previous gym or equipment similar set up and installation experience favoured upon $100 for what I estimate 2 hours work

avatar-url

Assemble gym equipment in Pennant Hills

Pennant Hills NSW 2120, Australia
19 Nov 2018
$200

I am after someone who is handy, has their own tools and experience assembling fitness equipment to assemble the below: Functional Trainer (Smith / Cable Machine) Hyper Bench Adjustable Bench Dumbbell Stand Estimated time from manufacturers is a 3 - 4 hours, photos attached. Availability after 5PM on weekdays, all day Saturday or Sunday afternoon.

avatar-url

Gym Equipment Assembly

Artarmon NSW, Australia
1 Nov 2018
$200

Need somebody to assemble a Technogym Leg Extension machine & assist with shortening the cables on a dual pulley lat pull down machine. Expertise required, experience preferred. Urgent. Have exploded diagram and tools.

avatar-url

Urgent Gym Equipment Assembly

Artarmon NSW, Australia
31 Oct 2018
$200

Looking to assemble a leg press, leg extension, last pull down & GHD. Need help & expertise. Experience required.

avatar-url

Install rubber gym mats in fitness studio

Northbridge NSW, Australia
6 Oct 2018
$150

Small fitness studio over 2 levels, looking for someone with experience installing a series of thick square rubber gym mats onto the floors. This will involve cutting some to fit neatly. Would also need some help to move existing equipment off floor and then back again once mats are done.

avatar-url

Assemble elliptical gym equipment

Greenwich NSW, Australia
2 Sep 2018
$100

Hi ATs I have a new elliptical that needs assembling.... all unboxed and ready for you to do your stuff. Please see pics attached... if you have any questions please let me know...

avatar-url

Small Electrical Tasks In Gym In Artarmon

Artarmon, New South Wales, Australia
27 Aug 2018
$280

Need to mount TV to front reception desk wall; make sure cables at desk are neat and tidy using conduit; mount sensor light on front entrance.

avatar-url

Lay gym floor

Artarmon NSW, Australia
2 Aug 2018
$1,000

Have 240sq m of gym flooring (1m x 1m x 15mm rubber tiles) that I need covered professionally. Outside tiles to be glued and inside tiles to be laid flat & potentially cut to cover the space perfectly. Floor is clean and ready to go.

avatar-url

Oxy welding piece of gym equipment

Turramurra NSW 2074, Australia
9 Jul 2017
$40

I am looking for someone to oxy weld a piece of heavy duty gym equipment back together. The job must be done properly as the weight machine needs to be capable of shifting 200kilograms. See pictures of gym equipment attached which is located in Turramurra 2074

avatar-url

Paint walls in our gym

Cammeray, New South Wales, Australia
17 May 2017
$300

I would like a quote for doing 1 coat of white paint on our walls in our gym in Cammeray (near North Sydney). No ceilings required. Must be able to do on a Saturday after 11.30am so it has time to dry for business on Monday.

Excellent job. Turned up on time and did job quickly and professionally.
avatar-url

Electrician wanted for odd jobs around 24 hour gym

St Leonards, New South Wales, Australia
23 Mar 2017
$120

Need the following done: - fan in bathroom fixed - self timer button added for an iron in changing rooms - ironing station attached to wall

avatar-url

Install 4 air vents in bathroom door sin gym

St Leonards, New South Wales, Australia
15 Feb 2017
$120

[Content Moderated] St Leonards - looking for someone to cut and install new vents in bathroom doors to improve ventilation. Will provide materials

avatar-url

Assemble Home Gym

Northbridge NSW 2063, Australia
18 Jan 2017
$200

Looking for someone to assemble the following for our home gym: - Power rack with dip bar - Weight plate rack - Load the plates onto the weight plate rack (250KG total of plates) - Put the barbell onto the power rack Everything arrived in boxes, so you'd need to unpack and also bring your own tools. I'd normally do this myself but I've pulled a muscle in my lower back so unfortunately can't lift anything over 5kg.

Job done perfectly and a genuinely nice guy. Thanks for your help and good luck with everything 👍
avatar-url

Disassemble and remove home gym

South Turramurra NSW 2074, Australia
27 Dec 2016
$50

Disassemble and remove a Weider 1120 home gym. You can either keep it or take it to a scrap metal place. They may even offer you a few dollars for it. It's currently in a shed and while there's a small chance it might just squeeze through the door in 1 piece I suspect it'll be easier to disassemble it. Also, it would be a 2 person job moving it in 1 piece.

David did a great job and was a pleasure to deal with. I'd definitely recommend him.
avatar-url$150

Needs kids play gym putting up. Also will need some of the wood to be reinforced with new wood frame.

Need someone to take apart this kids play gym and transport 1km away and put back up. Must be done this week by Sunday 30th. Do not bid if you can't do it this week. You must bring tools to take apart and put back up and have a vehicle to transport

Reviews for Fitness Equipment Installation on Airtasker

Average 5.00
From 7 Reviews.
7
0
0
0
0

How much does Fitness Equipment Installation cost?

The average cost of Fitness Equipment Installation is between:$147 - $300on Airtasker

Low

147

Average

250

High

300

Why Airtasker?

Local, skilled pros

Take your pick of skilled Fitness Equipment Installers nearby.

Real reviews

Judge for yourself – every task gets a review.

Flexible pricing

Choose the offer that’s right for you.

Offers in no time

Start getting offers to do your task ASAP!

Become a Tasker

A Tasker is a person who can complete tasks for other people within the Airtasker community

Start earning

We've been independently reviewed by thousands...

4901 reviews

4901 reviews

on Product Review

Fitness Equipment Installation
Fitness Equipment Installation
something else…