Find a professional gate installation in Inner South West Sydney

Looking for an experienced metal fabricator to manufacture a steel security gate assembly, supply only – no installation required. Lead time is the priority – please only quote if you can turn this around quickly. Include your earliest completion date with your offer. Scope: Security door frame (SHS 50 steel) with mesh over-panel – approx. 43 kg Single hinged mesh security door (frame + perforated mesh panels) – approx. 76 kg Total assembly approx. 118 kg Finish: powder coat matt black All burrs/sharp edges removed, swarf cleaned prior to powder coating We supply separately (not in your scope): Door hardware, hinges, lock kit, nutserts, screws, dynabolts, and plastic plugs – you fabricate frame, door and mesh panels only. Approx. size (confirmed on drawings at acceptance): Overall frame: approx. 3.2 m H × 1.1 m W (50×50 SHS) Door leaf: approx. 2100 × 900 mm, mesh infill panels Mesh over-panel above door: approx. 1000 mm H Provided: Full production drawings (A3, dimensioned, BOM included) supplied on acceptance. Requirements: Proven steel fabrication experience (security doors/gates preferred) Powder coating included or arranged by you Pickup/delivery ex your workshop (Sydney – job is for Kogarah area) Please include price and firm lead time in your offer.

Install child gate on my child's bedroom door.

Install and supply side gate with lock 1.8 m length, height 1.8, need another panel

Hi, I’m after an experienced installer to complete the installation and setup of a Hikvision intercom system at my home. All equipment has already been purchased, and the required wiring is already in place where needed. This is a labour-only job. Scope of work • Install 1 Hikvision outdoor door station • Install 1 Hikvision DS-KD-TDM touch display module • Install 2 Hikvision indoor monitors • Set up 1 indoor monitor wirelessly, no cabling needed for that unit • Connect and configure 1 door striker • Connect the intercom to the existing steel gate for vehicle access • Test everything thoroughly • Set up the app/network connection if required • Show me how everything works before finishing up Equipment supplied • Hikvision DS-KD8003-IME1/S door station • Hikvision DS-KD-TDM touch display module with M1 card reader • Hikvision DS-KH8520-WTE1 indoor monitors x 2 • Double module housing • Rain shield • Door striker Property details • Residential home • Existing wiring already in place • Cable prepared for the gate/intercom connection • One indoor monitor to be set up wirelessly • No new cable runs required unless minor adjustment is needed What I’m looking for • Someone with Hikvision intercom experience • Experience with gate access / steel gate connections

I am looking for someone to supply and install or install only

Need this shed pulled apart or demolished with all rubbish moved to skip bin on site in front yard. Also need gate removed from wall and put in skip bin. Shed is approx 3x2. You must have your own tools/equipment

Need car sprayed for cockroaches as it was sitting in the street for three months while at the repair shop. Car is a golf. Have seen small German cockroaches come through the vents

installed supplied bradform windmaster 300mm whirlybird on a single-storey corrugated metal garage roof. easy access, i even have a ladder. low pitch garage roof, i will supply the whirlybird and it's flashing that comes in a box. However, you'd need to get a dry flashing as I need it installed in the middle of the roof. (you will need to look inside the garage to make sure you don't cut above the support beams or garage door motor) (the roof sheet length is 6 meter in total, to install it more or less in the center meaning about 3 meters away from the edge). looking for someone experienced with metal roofing/sheet preparing to fit on the corrugated roof. installation must be weatherproof and include any additional fixings required. please confirm: experience installing whirlybirds on corrugated roof public liability insurance workmanship warranty invoice for tax purposes Ideally on a Saturday/Sunday so someone can open the garage and guide where to put it, flexible on days/dates.

Cut and fit a small hatch at the bottom of an aluminium side gate to allow a robot lawn mower to pass between backyard and front yard. Opening size required: 55cm wide x 32cm high. Preferred hatch: upward-opening to the backyard but installer may recommend the best option (inward hinged or upward). Fit a simple latch (no key) and finish to match existing aluminium gate. Job includes supply of materials, cutting/repair to the gate frame, fitting of hinges and latch, and any necessary reinforcement to maintain gate strength and appearance. Site photos available. Location: Brighton-le-Sands 2216. Flexible with time.

I need a side gate installed in my back yard to section off my dogs from coming to my front yard along the side of the house the house is brick and my fence is colour bond

Instal same colour bokorbond gate from where the down pipe is to the left side

Someone to repair safety gate

Change 2 sliding door locks,1 small side gate lock,attach 2 mirrors to wall and hang 1 kitchen rod

The Spring inside one of our locks is broken, the lock is located on the outdoor side gate of a residential property. We would like the lock fixed or replaced.

Need a pool gate removed from an internal door frame

Need someone to get some metal mesh from bunnings and just come install it on my current gate fence so that my dogs stop escaping

I need our driveway gate hung. Will require drilling into brick.

Looking for someone to repair a damaged Colorbond gate. The gate has a dent in the middle section (see photos). I'm looking for the most cost effective solution and would like advice on whether it can be repaired or if any parts need to be replaced.

Turn fence to gate in revesby

I put a small padlock on my side gate in a hurry when my dogs were home and have lost the key to it. My original one is on with the key but I can’t get the other off… random job I know but I need to get it open