Find a professional gate installation in Geelong

Need to deliver and top up paths around the sides and back of house with Tuscan topping aggregate (approx 5m3) using a wheelbarrow (provided) this Friday 28th or next Tues 2nd June.

Installation of a pre-made gate

I have a Nice electric gate and keeps blowing a fuse 1amp slow

Bad job done by previous owner resulting in loose gate and disconnected screws at opening. Need assessment for best way to repair or improve

Looking for a fabricator/welder to supply and manufacture a custom steel gate frame for a residential gate modification project. Drawing and hinge photos provided. Gate details: - Overall size: 1300W × 1905H - Material: 38 × 25 galvanised fence rail - Includes centre rail and 2 diagonal braces as per drawing - Frame only – no paint or cladding required Hinges: - Supply 3 new lift-off hinges similar to existing - Weld male hinge halves to new gate frame - Supply female hinge halves loose for site installation to existing gate Requirements: - Fabricate frame square to drawing dimensions - Clean welds and deburr cut edges - No installation required - Please include delivery to Armstrong Creek VIC in price Please provide: - Supply & fabricate price including steel and hinges - Approximate lead time - Photos/examples of similar work if available

I need a few handy person jobs done. Together they should take about two hours or less. Job #1 I need two metal downpipes cut so I can install water diverter. I’ve scored it but I’m too short to finish it safely. There’s 4 cuts required in total. If you could also drill a hole in my tank for the adapter that would be awesome too. I have the hole saw attachment but it doesn’t fit in my drill :( Job 2# My gate the catch is loose and getting stuck and some of the palings are loose. Just needs a few screws. Job#3 the grout around the kitchen sink and bench is crumbling. I need it re caulked in white. It’s about 3m of caulking in total. Job #4 - a tile has fallen off in the bathroom (it’s a skirting tile) just needs sticking on the wall. Job#4 Help me install plastic grates. I have purchased them just need to replace the existing ones. If you can help me sort these fiddle jobs I’d be so happy. Thanks. Any questions please ask.

Need a secure timer gate between side of house and fence. Don’t have any materials. See photo of where I need the gate (ignore chicken wire - it’s a makeshift fence to keep dog in) Distance between house and fence - approx 1.25m Distance between house and fence pole - approx 1.06m. Happy to receive any quotes.

Gate and fence erected aluminium monument 1550 wide x 1800 . Have all materials to complete job , will need to cut to correct lengths

Combination lock on gate needs fixing. The spindle has come loose and needs to be reinstalled.

I need someone to repair and reattach a fallen timber side gate. The gate has come loose from the side wall/post area. The timber panel/gate is still available and leaning nearby. The job likely involves: - Reattaching the gate/panel securely - Checking/replacing hinges or brackets if needed - Fixing/realigning the latch so the gate closes properly - Securing the timber post/fixing points to the brick wall if required - Supplying basic screws/bolts/brackets if needed Please bring your own tools. Photos attached show the current condition. I’d like it repaired neatly and securely, not just temporarily propped back up.

I need a swing gate opener installed. It is solar powered. I have all brand new parts and manual.

Looking for someone to install a farm gate. Work includes: - Digging 2 post holes (approx. 600-700mm deep) - Setting 2 x 1.8m timber posts (75mm) in concrete - Ensuring posts are level, aligned and correctly spaced - Hanging and aligning a 1200mm wide farm gate (including gudgeon + drop latch hardware) I already have the gate, gate fitting kit and the posts. Happy to supply concrete, or you can include it in your quote. Access is straightforward. If you have a post hole auger, that would be ideal. Looking for someone who has done similar gate/fencing work, as I’d like it installed solidly and neatly. Flexible with timing over the next couple of weeks.

There is a side gate at the property that has the latch on the inside. This doesn’t work because the gardener needs access to the rear yard. I want the inside latch to be removed and one put on the outside. I will need you to get a combination padlock to lock it once done.

Looking for someone to repair or upgrade a gate for a laneway access in Geelong. The existing gate is attached to a concrete wall and needs to be improved so that: - It swings closed properly (self-closing preferred) - It feels solid and secure - Overall finish is clean and well-fitted I would also like the gate to be suitable for a keypad or smart lock installation (battery powered, no wiring), ideally with the option to remain unlocked during the day (passage mode or similar). Open to either adjusting the current gate or replacing it with something more suitable, depending on your recommendation. Requirements: - Experience with gate installation/repairs - Ability to fix securely into concrete - Suitable for outdoor use Please include: - Your recommended approach - Examples/photos of similar work (if available) - Quote including materials and labour Photo attached for reference.

We require someone to build a mini gate and mini fence for this area for our chicken coop. This is the area.

Glass pool gates need some adjusting for the magnetic latch to catch. One gate is not closing by itself. A total or three gates need to be inspected.

Sliding door needs a lock put on it. Gate needs the latch moved to the opposite side.

To paint 2 coats in white wooden gates and two posts. We will supply paint.

Large heavy gate needs fitted to the side of my property.

Widen my gates and also make them open outwards they currently open inwards.