21 Timber Flooring Experts in Melbourne

Timber floors need to be stained and sealed

Hi there, we have had some water damage to an engineered floor and we are seeking someone to lift and replace the board. We have a substantial amount of pristine floor boards stored that can be used. We just need someone to remove the old and replace. The board I am pretty sure were glued to the chipboard floor during the install. I think there are probably 9 board to replace in two distinct groups. Please refer to images. Additional information 21/8. I have lifted the boards and the sub floor is also impacted. To the best of my understanding I think the task is to remove the casement sliding door, which from memory is only a number of screws which attaches it to the frame. My guess is there is a small amount of sub floor chipboard to replace (perhaps 1 m2 +) and then the flooring cut and replaced. I am very happy to agree on an hourly rate if it helps with quoting

I need a handyman or carpenter to remove and dispose of Approx 3m2 of existing Tasmanian Oak Timber Flooring in an open plan kitchen in preparation of new flooring to be installed. I need the smaller boards as circled removed and some longer lengths that meet these smaller ones removed. MUST be available to complete work tomorrow on 1st July. Ready to assign.

Need to replace 5 planks on a floor, we don’t have extra boards so you will have to bring them, Name of the timber : fumed artic Please quote price with 5 boards

3 rooms of previously varnished timber floors to be sanded and revarnished. Still in reasonable condition, needing light sand and revarnish. Total area 82 square meters. Plus some timber stairs to be sanded and varnished. 2 flights of stairs previously varnished, and only the edges need to be done because carpet will be layed in the middle. Another new flight of stairs needs edges done so carpet can be layed in middle. 4th flight of stairs is new, and needs complete varnish i.e. no carpet on this one. Start and completion date is a bit flexible. Need to be experienced, and able to do to a good standard.

The area of my floor is 82 sqm. I am looking for installation of engineered timber in my apartment, light brown but not white, for eg. Blackbutt or European Oak. The hardwood layer of the engineered flooring should be between 3-4 mm thick. Existing carpet and tiles in the kitchen will need to be removed. Acoustics underlay is required. All material to be supplied by you. I am in the St Kilda area. You must be qualified in timber floor installation.

Need to repair some timber floorboards with water stains.

I have roughly 38m2 of veneer timber flooring in my apartment which needs to be sanded back and re-sealed. There are a couple of boards that have sustained water damage and will need to be replaced. I'm also interested in replacing the carpet on our staircase with the same timber veneer material. At this stage i'm just looking for quotes for when we get out of lockdown.

Hi, I have some (16 in total) scratched floor boards that I am replacing. I have spare boards from the same batch, all my skirtings are off and I have started carefully removing the boards to get to the bad ones. It’s not as easy as I thought so I need someone who has experience with floors to help.

Concrete slab will be ready to install floating timber floor for 13.5m2 We will have purchased boards ready Concrete will have had carpet removed In Melbourne CBD, a Saturday or Sunday to install Job price negotiable, not sure how long it would take etc

remove carpet/tiles in 3 rooms and in an apartment CBD. lay new wooden laminate floorboards 55sqm approx Parking available in building.

Original timber flooring in a 1900’s Victorian. One floorboard has come loose and dropped down. This is the back part of the house so underfloor access isn’t possible. I am wanting to preserve the look of the original flooring and know the plank can be pulled back up in place though would need supporting underneath, likely by anchoring to the neighbouring floor boards.

Timber flooring to be replaced in small sections as follows: Kitchen 1250x3400 Hallway: 1200x2750 Bedroom: 90x2450 All direct into concrete base. Also to quote how much timber I will need. Photos attached.

We are handing over 8 townhouses and 1 of them needs 20m2 of engineered board lifted and replaced. The replacement board is on site. - Due date: Before Monday, 18th Oct 2021

Lay 65-70sqm engineered timber floorboards in a house. All material provided. See my other task of pulling up ceramic tiles, open to combined offers. Photos to come.

Small section of oak floorboard (approx 60x60cm) damaged through dog peeing on floor and barstool rubbing against. Believe needs to now be sanded back and resealed/lacquered.

Remove exisiting carpet in living and bedroom and tiles in kitchen, replace with timber flooring (preferably herringbone style). Total area 36m2. I can supply but I need someone to demo & install.

Hi. I would like to change my apartment flooring from carpet to either timber or vinyl. It is approximately 60sqm. Could I please have quotes? Work to commence in July/August. Thank you.

No polish, just sanding Location is Dallas Ready to hire see pic

I have moved into an apartment and would like timber floating floor installed in kitchen, bathroom and hallway. Price negotiable