Find experienced local fencing contractors in Wentworthville

Supply and install 2 side gates

10-15 meter long fence damaged during home renovation. Need to repair.

I need to extend my fence and have a gate to it - Due date: Before Thursday, 25 January 2024

Need to replace the existing broken wooden fencing with steel fencing. 900 cm * 180 cm is the dimension. So 9 mtr width 1.8 mtr high - Due date: Flexible

Remove some old bricks and making a new fence with a render finish. - Due date: soon

Supply and install pool fence and gate for a portable pool in line with council rules - Due date: Flexible

Fixing the broken fence and building the retaining wall. Due to soild removal for storm water tank, the few fence posts are exposed and now retaining wall needs to be build and probably new post needs to be installed. Please refer to photos to get an idea and site inspection is recomended to understand the work. - Due date: Flexible

Need to attach three bamboo panels to existing colorbond fence, each bamboo panels are 1meter by 2 meter - Due date: Before Sunday, November 6, 2022

A fence gate lock to be installed. I assume there is a post. proper fence lock is required From Neighbour zigzag fence to my gate width is 12 cm or 9.5 cm - Due date: Before Sunday, 16 October 2022

13.5 m long 1.8 m new colorbond fence. Remove existing timber fence ( collapsed) - Due date: Flexible

I require a fence and gate to enclose a section of my backyard. I will cover the material costs. The total length of the area to be fenced (inclusive of the gate with dimensions of 900mm) is 6650 mm. Due date: Before Sunday, 14 August 2022

Footage for my 15 meter brick fence but the driveway is 5.5m so the Footing must be done for only 9.5 meter. Deep 500cm with cage mesh and and concrete job. Only doing FOOTINGS. (FYI height will be 1.2meter) - Due date: Flexible

I have a piece of lattice that was attached to my brick fence but has come off...It will take 3/4 screws to reattach it.... $20 cash tip included. - Due date: Needs to be done on Wednesday, 17 May 2022

30 meter colorbond fence (RHS) front raked down to 900mm material 1.8m (H)x30m(L). 14meter Colorbond Fence Material 1.8m(H)x 14m(L), RHS treated pine timber sleeper retaining wall.back fence treated raitaing wall sleeper. Almunimum horizontal slat single gate 1.8m + another almunimum horizontal slat singl gate 1.8m. x 2 horizontal slat fixed panels 200mm (L) x 1.8m (H) and 1480mm (L) @1.8m (H) - Due date: Flexible

Privacy screen installation about 1.2 m height and 2 meter long - Due date: Flexible

I looking forward someone to install 12 meters of bamboo to my colourbond fence and 6 meters of Fake Grass to my colourbond fence - Due date: Before Tuesday, 21st Dec 2021

I had my gun safe installed with a timber underneath ,which is not up to standard.I need to redo the installation by removing the timber from the bottom.

Need a glass fencing installed onto my decking (picture attached ) 2 gates including in the 6m Will need extra support under the decking to keep it secure. All materials supplied

Remove and take the existing timber post and corrugated alumimium sheet fence and supply and fix with 1.8 m high and about 15.3 m length Colourbond fence. Need 150- 225 mm high treated timber at the bottom. Please state warranty on material and workmanship. Require receipt for the payment. Site inspection is recommended.

Remove and take awat existing timber post and corrugated alumimium sheet fence and replace with 1.8 m high and about 15 m length colourbond fence.