Find experienced local fencing contractors in Tingalpa

We have 6 x Wooden Fencing Posts that require removing. They are in dirt but also have concrete around them.

We have a leaning timber fence, and would like an experienced person to fix the issues. Initally we'd like a 10m section of the fence repaired and restored to its original state.

Current 20m boundary wooden fence to be removed and replaced. New fence to be approx. 2m high with gravel board.

Install a hardwood post and glass panel pool fence - 8 posts to be sunk and concreted plus install glass panels and gate. All materials supplied.

To replace 4 timber posts (200×75mm) on the retaining wall.

To repair 6m to 9m of damaged timber boundary wall at Torquay Crescent, Tingalpa QLD 4173. Maximum boundary wall height is about 1.8m.

Quote fence job 45lm 1.8m height colourbond fence - Due date: Before Wednesday, 1 November 2023

Palings are loose. Access to both sides of fence is no problem. - Due date: Flexible

Looking to have a pailing fence built at front of residence. Existing fence to be removed (pool fence panels and wooden posts - photos attached). New fence to be 15m long and with 1.2m high pailings. Rail across the top (photos of style attached). Mailbox to be built into fence. (Owner supplied, photos attached. Materials + labor required. - Due date: Flexible

I urgently need these two fences quoted separately. We'd like to go with a metal fence. The first quote must include a gate but no need to include this in the other quote

25m replacement of old timber fence with colorbond fence. As well as 25m of retaining wall with concrete sleepers. - Due date: Flexible

Replace side gate. Replace pool gate. - Due date: Flexible

Timber fence 170cm high and 7m approx long needs removal and replacing, falling over. It is between the courtyards of two townhouses . Access is only through the units. - Due date: Flexible

Erect fence on reataining wall 40 m Materials supplied by poster

Glass pool fence installed, approx 14m. Supply and Install - Due date: Flexible

I need some help removing timber gate and replacing with a steel gate. I don’t have materials and hoping to find someone who can do the lot please. Photos attached. Sorry I don’t have a measuring tape so unsure of dimensions.

Need to install 2 pedestrian gates , materials will be provided. Measurements: 1. 1 m width gate 2. 0.8 m width gate

Need a quote to put up a Colourbond fence about 20mtrs long.

I would like a gate installed. I already have the gates and fittings. It requires drilling into the concrete post on the side of my house for one of the gates to screw into and one fence post to be dug and installed on the other side.

Wanting quotes on installing a small side gate/fence build. Photos attached and dimensions below. Wanting to build a fence covering the hot water system with an open gate on the right of it. I have the gate ready to go available to install (dimensions of it below) Gate 1m wide and 1.2m high. (Photo attached) 2200mm between house and fence 1500mm between hot water and fence So basically I just need about a 700mm in length fence from the wall that covers the hot water system. Then a post to attach the gate too. Then another post to attach it on the other side. Then another piece of fence about 500mm in length. Those aren’t spot on measurements but are pretty close, as i dont know the width of the posts you will use. Hope that makes sense haha Can be completed on any date within next two weeks