Find experienced local fencing contractors in Panania

Fence height needs to be at least 1.8m for pool compliance. We need to extend the height of my back fence so that it's compliant (just the top of the fence, no need to board up the entire thing) Fence height varies between 1.6m and 1.7m along the length, we'd need the entire run to be at least 1.8m. Estimating that a few 300mm pieces along the full length should do it. Fence length is just under 10m long. Not fussed on quality of materials. Happy to use cheap plywood (as shown in the 2nd picture)or whatever you have that will get the job done (tasker to supply). - Due date: Before Tuesday, 12 March 2024

supply & install of one Colorbond Fence solid sheet extension panel 2.36mx300mm similar colour & profile to existing fence and extensions.

Supply and install colour bond fencing 44 m Panania, NSW 2213,

Supply and install colour bond fencing 44 m Panania, NSW 2213,

Job Description: Fence replacement Size: 44 meters Converting timber to Colorbond fence to a height of 1.8 meters • A - PREPARATION: o Demolition; o Removal of old materials/ © Cleaning the soil in the areas where excavation is needed. • B- INSTALLATION: o Measuring and excavation; o Leveling and alignment; o Concreting the posts; o Installing the fence panels; o Fixing the bottom and top tracks

We need rhe Colour bond fence to be installed, we are yet to purchase the materials. Will pay cash Due date: Flexible

The automatic gate needs installation only. Previously it was in working condition due to re-do the driveway gate being removed. Instead of brick post, need panel appr 1070X400mm. - Due date: Flexible

We have all colorbond fencing material. Just need one side of fence installed. - Due date: Flexible

Need to supply and install a colorbond gate on side of house Size about 208cm (height) x 80cm (width) - Due date: Flexible

2 panels of our fence have been damaged. Need to be replaced. Pick-up panels, install and remove damaged panels. Panels will be paid for separately.

I have an existing colourbond fence with 2370mm panels. Looking for supply and installation of two 300mm high solid panel Colourbond fencing extension pieces. The colour to match other extension panels that were recently installed. See photos for details. - Due date: Flexible

Some parts of the wooden fence is leaning and need to be repaired. - Due date: Flexible

Require 7.5mtrs of fencing to match existing standard colour fence. Cream and black post. Would like it dropped ( Cut ) down and close off boundary to the existing front fence. See pics. Will pay for labour and pay materials needed. - Due date: Flexible

Need supply and install fence in backyard for partiotioning Lenght 10 meters approximately Height 150 cm approximatetly - Due date: Flexible

Looking to get the Australian bush spray painted on 11 colourbond fencing in our backyard, panel size 2380mm Long x 790mm Wide x 1800mm High - Due date: Flexible

Replace and disposed all fence around the boundaries of the house and replace it with 1800 mm Bluescope Colorbond fence, 107 m woodland gray color, excavate post holes and set posts in concrete, supply and set H4 treated timber slippers as base of fence between fence post to act as retaining wall.

I need approx 11 m coloubond fencing installed between main house and granny flat. Fencing height needs to be 2.1m, dark charcoal in colour. You will need to provided insured fence.

Wooden or aluminium side gate needs to be installed and fence running down the side of the property approx 8 metres.

Install wood door through my backyard fence Thanks

I need 3 gates installed, 2 at either end of one sideway (approx 75m W x 1.8m H and the other 1.2m W x 1.8m H) and 1 connecting the backyard to the other sideway (approx 1.2m W x 1.5m H). The main purpose is to keep my dog contained. Interested in getting a quote for a lower end cost job. Open about material ie colorbond, timber, chain etc