Find a fence repair professional in Blacktown

Part of fence has fallen off from remaining fence

- supply fencing posts - install fencing posts - supply and install new fencing sheet as shown - install door. It is already supplied by us. - fix defects

We require someone to take out the section of wallpaper colour match it then supply and install a new section where it has bubbled

Require the gate locking mechanism to be repaired and make sure gate open and closes properly. Unfortunately this is a repetitive problem occurring as the wind repeatedly damages the locking mechanism. Require a more permanent solution that stays closed and appropriate materials needed for the job. Flexible to your schedule too Thanks !

The area underneath our side fence has a noticeable gap and is slanting towards the neighbour’s yard. As a result, the small retaining wall/sleeper panel has broken towards the neighbours yard. Roughly 10 panels need replacing. (Pictures were taken from the neighbours backyard)

Fix tail gate and scratch on tail gate needing a quote to repair

One of the timber pieces from my backyard gate has come out and I need to bolt it back

Neighbour installed a shade cloth hook on fence post, over time and many windy days and months later, the fence post is now leaning onto their side. Wish to know if this can be repaired and cost for doing so.

Repair gate provide new latches for the ground *2 and replace rusted hinge, raise gate up and realign, provide a latch with extension and make it line up properly so it can be opened from the outside. Need a latch I can use a padlock with.

Looking for an experienced handyman/fencer to help straighten up my timber fence and replace a few damaged panels. Scope of Work: • Straighten leaning timber fence. • Replace several damaged/broken panels with new ones (I can supply panels, or you can include supply in your quote). • Ensure fence is secure and aligned. • Clean up and remove any waste material. Timing: Flexible, but ideally within the next 1–2 weeks. Requirements: • Must have own tools and equipment. • Prior experience with fencing jobs preferred. • Reliable and efficient worker. Budget: Please provide a reasonable quote (including labour and any additional materials if required).

The fence is tilted towards outside

corner block standard 70mm fencing through out the area. some panels are starting to rot after 17 years due to moisture mainly on the side gate the other panels are starting to deteriorate and may be saved. or replace the lot which could be cheaper due to labour cost in repairing the rot,the fence is painted in a light grey colour, Timber frame work is solid with steel frame duel gate. top hinge needs renewing as it is dropped. i bought the parts but due to health reasons can't do it. would appreciate quote please. Dimensions = 11mtr long, 1.8 high. ground level.

Part of my timber fence is damaged. Please see attached photos. I need someone to fix this.

fix leaning fence bordering neighbour. fence made of gi sheet

I need a skilled concreter or handyman experienced with small patch repairs to fix damaged edges and post bases on my driveway, before a Spray Crete resurfacing job on Wednesday (weather permitting). The repairs must be completed on this Tuesday (weather permitting, weather forecast seems to suggest sunny) so the new resurfacing spray crete can be applied the next day. Scope of Work: 1. Repair damaged sections along the driveway edge and around fence posts (see attached photos). • Fill and rebuild edges where concrete has chipped, broken, or eroded. • Shape edges to match the profile as closely as possible. 2. Material specification: • Use Rapid Set Cement All for patching (available from Blacktown Building Supplies), unless you have a strong reason for an alternative (please explain if so). • Use a suitable bonding agent (e.g., BondCrete) to ensure proper adhesion. • I can provide the Rapid Set Cement All and BondCrete, unless you have your own supply. Quote should exclude these if I buy them. 3. Surface preparation: • Remove loose concrete, dirt, and debris from each repair area. • Apply bonding agent according to manufacturer’s instructions before patching. 4. Finishing: • Smooth and shape the surface to blend with surrounding driveway. • Ensure patch is fully cured, level, and solid before resurfacing crew arrives the next day. Repair Locations: 1. Circular cut-out around gate post – fill and blend to match driveway level. (Photo 1) 2. Broken edge beside gate post – rebuild flush with driveway. (Photo 2) 3. Large corner break near opposite gate post – rebuild missing section to original height and shape. (Photo 6) Notes: • Driveway resurfaced on Wednesday (unless it rains), so timing is critical. • Job completed to a standard that allows resurfacing. • Please bring your own tools for concrete mixing, application, and shaping.

One my friends moved the fencing gate and the lock below was bent. I need that to be fixed so that the gate can be securely closed. The bent knob is as shown in the pictures.

Colorbond fence gate collapse after strong wind. Reuse existing frames and sheets since it is still in good condition. Screws all gone and need to be replaced. Reattached the gate.

Dog has punch out the colorbond from the frame. Need gate repaired

Need infill sheet replaced for colorbond gate. 2.8m W x 1.8m H. Install drop bolt, safety latch keyed lock. Gate to be raised by 50-60mm while refixing. End posts, stiles, frames etc are all reusable.

The timber on our side gate has rotted from all the rain and needs replacing. Please see attached the photos.