Find a local console repairer in South East Melbourne

The toilet cistern doesn’t stop filling completely, and the tiny amount of water keeps running after it’s flushed. Two toilets to be fixed. Also one toilet seat is wobbly

Looking for a licensed electrician to attend my home and investigate an electrical fault. One of the circuit breakers/RCBOs on my switchboard has tripped and will not stay on. Every time I try to reset it, it immediately trips again. I’m looking for someone to: * Diagnose what is causing the circuit to trip * Check the affected circuit/outlets/appliances as required * Repair the fault if reasonably possible during the visit * Confirm the electrical system is safe Photos of the switchboard are available. Please provide your availability and approximate call-out/diagnostic cost. Licensed electricians only please.

Paint a single 3mx3m bedroom upstairs, paint provided.

I need a licensed locksmith (or an experienced handyperson used to smart locks) to install a Philips EasyKey 7300-5HB smart handle lock on the front door of my home in Glen Waverley. I will supply the lock. Please refer attached spec images and the door photos. About the door: * Solid timber, hinged, single front door, 40mm thick. * Currently has a euro-cylinder mortice lock with a lever handle (brand ARCHIE). Backset 45mm, stile width 128mm. * There is a fixed glass sidelight beside the door and a security fly-screen door in front of it (about 75mm clearance to the fly-screen door). The new lock (Philips 7300-5HB, black): * Smart handle lock with its own lever handle and mortise body. External size 80 x 340 x 60mm. Rated for doors 38-60mm thick. * Unlocks by fingerprint, PIN, key tag, mechanical key and app. What I need done: * First confirm the lock will fit before any drilling, especially the ~75mm clearance to the fly-screen door (is it too close) and the 40mm door thickness. * Remove the existing ARCHIE mortice lock and handle. * Cut/fit the new mortise and install the lock, making sure it aligns and latches properly and the deadbolt does not foul the frame. * Set up the admin code, register a couple of fingerprints, show me how to add and remove users, and show me how the mechanical-key backup works. * Take away the old hardware if I do not want to keep it.

Hi, my shower leaks for awhile. Also, my tap in the same bathroom would leak after about 30 minutes after showering, not sure if they are related. I got a plumber to come look but although he changed the tap, the other tap starts leaking... so I'm not sure if they are connected or not.

### Supply and Install Ceramic 1/4 Turn Shower Taps I need a licensed plumber to replace the existing old-style washer-based shower taps with ceramic 1/4 turn, washerless taps. Job includes: * Supply a suitable ceramic disc, 1/4 turn shower tap set * Remove the existing washer-based taps * Install and connect the new tap set * Check water pressure and operation * Check for any leaks * Clean up after completion Important: * Must be completed by a licensed plumber * Please supply quality ceramic, washerless 1/4 turn taps * Quote should include both supply of taps and installation Please provide your total price including labour and materials.

Check stumps under the house in Mount Waverley and relevel if needed. Good clearance, see photos

Bathroom tap need to be changed. Also provide a quote for kitchen faucet changing on the site.

Since the last few days, 2 taps in the house have very low hot water pressure. Need to check what’s wrong

Need mixer tap swapped over for new one. Have new tap. Also need two mini stops added. Have mini stops. Want quote for installation. Please quote what is included in your offer Want done as soon as possible.

Supply and install 1 sink mixer for laundry sink. Supply and install 1 sink spout for kitchen sink (or fix existing if it can be fixed)

Looking for an experienced gardener or tree removal contractor to remove a large clump of mature yucca plants from my backyard. The job includes: Cutting down and removing all yucca plants. Removing all green waste from the property. Completely removing the stumps and root balls so the area is level to redo fence. Leaving the site clean and tidy after completion. The yuccas are mature with multiple trunks and are located along a fence line, as shown in the attached photo. Please bring all necessary tools and equipment to cut dow, remove stump and plant.

Two stumps to be removed - we can cut one of the stumps down before the job.

My hot water system stopped working suddenly. Vulcan gas storage hot water system Cold water is working normally throughout the house No water comes out from any hot water tap (kitchen, bathroom, shower etc.) Hot water was working normally yesterday Today there is zero flow from all hot water outlets No unusual noise from the hot water unit when hot taps are turned on Suspected issue may be a tempering valve, non-return valve, or hot water supply valve fault, but diagnosis is required. Looking for a licensed plumber to inspect and repair as soon as possible

Need someone who can build a 7ft multi game table

Need approx 15 stumps grinded out All different sizes, only two or 3 large stumps

Need two stumps removed and ground leveled, tidiness of the area would be great too. Type of gardening: Other Size of garden: Under 50m² Has green waste bin: Yes

I am looking for someone to remove 15 Pittosporum hedge stumps from my property. The hedges have already been cut down to ground level, so the task is strictly for the removal of the stumps and root systems only. No foliage or branch disposal is required. Quantity: 15 stumps. Stump Size: Approximately 130-200mm each. Soil: Silty sand for mininum 70cm deep and silty clay underneath. Access: Easy access via driveway width up to 2000mm. Height clearance of 2.5m due to carport. Requirements: You must provide your own equipment (stump grinder or excavator). Disposal: Not required, mulch will be left on site. No underground utilities under or near the stumps. Garden bed will be removed before the job.

Remove 4 stumps, they are in a raised garden bed that has a wall going all the way across

Job Title: Fix two leaking taps (shower head and bathroom basin) Description: I have two leaks in my bathroom that need repair. Shower: Water slowly drips from the shower head when the taps are fully turned off. Bathroom basin: The basin tap also drips from the spout when off. Also leaking water from both handles. Both fixtures have separate hot and cold taps (two-handle taps), so the issue is likely worn washers or internal seals in the tap spindles. What I need: Replace washers / O-rings and ensure both taps shut off properly with no dripping Notes: Standard bathroom taps (not mixer taps) Tasker should bring basic plumbing tools and replacement washers (as I don’t have relevant equipment to do this myself). Would suit handyman, retired plumber or someone local looking to make some quick cash. I’m not necessarily after a qualified plumber as it’s a relatively quick and easy job.