Find a local console repairer in Gold Coast

Cut off 3 big tree stumps close to ground Type of gardening: Other Size of garden: 150m²-300m² Has green waste bin: Yes

2 x stumps removed, they are already removed from ground just need cut into pieces and removed from site.

We have four tree stumps that need to be cleared. Two are in the front yard, which are easier to reach with equipment. The other two are in the back yard, which are larger and harder to reach with equipment. All four stumps are from landscaping trees, with shallow root systems and relatively soft wood.

Need 3 x basin taps fitted. Existing ones removed as well. Have bought three fittings which appear to be exactly the same as existing. 2 in main bathroom, one in ensuite.

Wall patching & paint touch‑ups – fix holes, dents, scratches and small damage. • Interior paint touch‑ups and small painting jobs. • Ready‑to‑rent / end‑of‑lease wall repair.

RFQ from qualified trades people to complete building maintenance required to front of unit. - Carpenter - install flashings above window - seal window and door frame - Renderer - repair cracks in external render allowing to seal all joins and internal corners - Roof Plumber - replace all flashings and capping's to front elevation

Looking for someone to patch small plasterboard wall damage and paint to match. Includes one hole from furniture removal + a few minor cosmetic touch-ups. There are about 4-5 areas touch-up areas in total, but one main hole/wall damage. Standard gyprock/plasterboard. Please include sanding and paint finish. Paint can be supplied.

To assemble and erect a garden shed. It is 2.1 m wide, 1.07 m deep and 1.8 m tall. The surface is flat tiles and concrete fixings are supplied and need to be installed. The company suggests that 2 to 3 hours is an expected time to complete the job. Experience in this work is preferred.

I have a small dent in one wall, and on another two walls the paint has chipped off

I have FTTP NBN with the NBN fibre box (NTD) located in the garage. Currently, my router connects via ethernet to a data point downstairs (study). I want to keep this existing downstairs connection and add a second Cat6 ethernet point upstairs so I can relocate the router out of a new nursery. Scope of work: • Run one additional Cat6 ethernet cable from the NBN box in the garage to an upstairs room • Install one ethernet wall plate upstairs • Keep the existing downstairs data point active • Terminate and test the new connection House is two storey. No NBN or ISP work required. Licensed cabler required.

Hey! Need two holes patched up in the bathroom. And potentially need filling of a 50c sized dent downstairs. With the bathroom holes, one is an inspection hole directly above the shower head and the other is broken gyprock hole from a broken off towel rack. I will paint. Ideally need it done before the 23rd.

Posting for my parents place. Want to completely replace the entire bench tops with a simple ikea worktop. Might consider getting a new sink as well depending on budget.

I need two bedroom walls prepped and painted (two coats). Substantial sections of existing paint peeled off after removing peel and stick wall paper. Will need appropriate prep (sanding etc) to ensure the surface is smooth and you can’t see surface transitions. In addition there are around 5-10 small touch ups required on other walls (approx size 50c piece) where a small patch of paint has peeled off with 3M renters tape removal (fill, sand and paint). I’ve obtained colour matched paint (4L). Tasker to provide other necessary tools/ floor coverage to ensure no paint goes on carpets and fully clean up after job. Job must be finished before 12pm on Monday 1 Dec. Thanks in advance

3 trees need tops trimmed off them. They are tall and thin so wouldn’t need a chainsaw. The stand alone ladder would need to reach 5m high as we don’t want the tree leant over and roots damaged. Type of gardening: Other Size of garden: Under 50m² Has green waste bin: Yes

I need two large stumps removed. Pics attached.

Renovating laundry. Need washing machine taps lowered to roughly 700mm off the ground. Will be a bench top going in so the aim is to keep the taps and hoses hidden. Pipes are copper.

We need to remove existing basin tap set and install a new 3-piece set. Work required: • Remove old hot/cold taps and spout • Install new set • Replace the old copper tails with flexi hoses (I have already purchased the flexi hoses) • Connect everything, seal properly, and check for leaks • Access is standard under-sink vanity

I just need someone fo chainsaw 2 x large tree stumps to ground level But we will clean up mess just cut up so we can lift to the Ute tray

Bring 4 large panels and 3 small panels of wall panelling up 14 flights of stairs in a unit building. They are quite heavy the big ones being 35kg. 2 person job.

Taps need reattaching on replacing