Find a local electronics repairer in Inner South West Sydney

Job Title Wardrobe Dismantle & Plaster Patching (Upstairs) - DISPOSAL OPTIONAL Description Looking for a handy person or carpenter to completely dismantle a built-in wardrobe system from an upstairs bedroom and patch holes left in the drywall. Waste Disposal is OPTIONAL. Please provide a price breakdown in your offer: Base Price: Dismantle wardrobe, carry pieces downstairs, patch walls (leave materials stacked on-site). Add-on Price: Fully load and legally dispose of all materials offsite. The wardrobe is approx. 2.97m long. Scope of Work: Dismantle & Move On-Site: Carefully remove 3 floor-to-ceiling sliding mirror doors and their top/bottom tracks. Safely carry mirror panels down 1 flight of stairs; stack neatly on the ground floor. Strip out internal white melamine shelving, upright partition panels, and drawer runners. Note: Internal framing is nailed directly into walls/floor, not screwed. Please use a pry/crowbar to minimise drywall damage. Stack all timber neatly. Drywall Patching: Patch and flush-repair the rectangular drywall cutout/hole shown next to the skirting board in file. Patch any holes or surface tears left behind by framing nails. Optional Disposal: If selected, remove all timber, tracks, and mirror glass from the property. Requirements: Bring own tools (pry bars, track removal tools). Supply own plastering/drywall patching compounds. Must be physically capable of safely moving large mirror panels down stairs.

Supply and installation of wall mounted outdoor hand rail covering 3 steps.

Install 3 Floating Timber Shelves in Kitchen Looking for an experienced handyman/carpenter to supply and install three rustic timber shelves in my kitchen. My wood preference is Tasmanian oak but happy to hear your suggestion on other types of wood. Requirements: Supply and install 3 shelves as shown in the attached photo/reference. Rustic timber finish (similar to the example image). Preferred option is floating shelves with concealed brackets for a clean, modern look. Shelves will be used to hold mugs, glasses and small potted plants, so they must be securely installed and capable of supporting moderate weight. If true floating shelves are not suitable due to the tiled wall or weight requirements, I am happy to consider discreet black or timber brackets underneath. Shelves to be positioned evenly on the tiled wall, aligned with the tile lines where practical. Please include all materials, fixings and installation in your quote. Please provide: Photos of similar shelving projects you have completed. Recommended shelf thickness and weight capacity. Whether you believe floating shelves are achievable on this tiled wall. Your total price including materials and installation. Location: Roselands, Sydney. I have attached a photo of the wall where the shelves will be installed.

issues on electricity switch board as it requires us to go outside and turn switch back to on mode whenever we use our ac

Need these 2 driveway ramps drilled screwed into the ground. 4-6 screws each. So it stays put

These are wall mounted taps from the 1970s. Total cost to replace both taps including AirTasker service fee and GST.

Storz & Bickel VEAZY - Dry Herb Vaporizer Looking for an experienced electronics hobbyist or bench technician with micro-soldering capabilities (fine-tip iron, flux, and ideally a microscope setup) to repair a high-end dry herb vaporizer. The Device & Materials:Model: Storz & Bickel VEAZY (a premium, German-engineered medical-grade device). Casing Material: The outer shell and internal structure are made of medical-grade PEEK plastic (Polyether ether ketone). This is a highly heat-resistant engineering polymer, but it is tightly sealed. It needs to be pried open gently with proper plastic opening tools without snapping the plastic tabs or melting the housing during solder work. The Issue:The device has an internal connection failure. I need a technician to open the PEEK casing, inspect the main logic board, and re-solder the broken joint. This is likely: Option A (If not charging): A fractured pin connection where the USB-C charging port meets the PCB board. Option B (If not turning on): A loose/snapped power wire connecting the single-button system or internal battery to the motherboard terminal pads. Important Note on Warranty:Please note that I am deliberately choosing to bypass the official manufacturer warranty process due to the long turnaround times for international shipping as well as not purchased in Australia. Because opening this device permanently voids my warranty coverage, I need someone meticulous who will treat the board with care, apply proper flux, and ensure there are no bridges or short circuits before re-assembling. Logistics:I can drop the device off to you if you are located around the Campsie / Inner West / Canterbury-Bankstown region, or you can here. Please offer your price based on a quick bench diagnostics and point-to-point micro-solder reflow.

We are looking for someone to build a small platform covering the bottom 3 or 4 steps of this staircase. Over the top of the existing steps is fine. The platform would then wrap around the corner and step down to the ground. The staircase is quite steep as it is so we are hoping adding a platform would make it more accessible. There is sandstone behind the staircase so replacing the whole thing is unlikely although we are open to suggestions. Area downstairs is approx 150cm wide

I need an apartment painted just 2 bedrooms and main door . Window frame only prep and paint and paint 3 doors

The rubber in the door of the washing machine has come loose. I cut the old thin steel wire which held it in place, it just needs a new one put in and tied

Looking for an experienced handyman/builder to install 5 glassless dance mirror panels onto a wall in a home studio space. Each panel measures 200cm x 120cm, and I’d like them installed side-by-side to create a seamless mirror wall. Product link (for reference): https://dance-floor.com.au/product/portable-dance-mirror-180cm-x-120cm/ What’s included: - Bolts and brackets - Mini spirit level - Fabric gloves for handling mirrors - Instructions (attached) What you’ll need to bring: - Drill and appropriate tools - Experience mounting large panels securely to walls. Key Requirements (important) - Strong attention to detail is a must - Panels must be installed flush and tightly aligned (no visible gaps between mirrors) - Must ensure level, straight, and secure installation - Careful handling to avoid damage during install

Hi! I hate assembling flat-pack furniture but apparently some of you really like it? I just moved into a new apartment in Campsie and would love someone to come round and reassemble my IKEA Brusali Luroy double bed. You would need to bring all of the required tools. I was hoping to have the bed assembled today (Sat 18 April) before 6pm. Sorry for the short notice! Thanks!

Hi, after a recent repair, the laundry taps are all messed up. The hot water tap wouldn't stop the water, it keeps on running. I have to stop the main one for all hot water to stop. The cold one as well also has some leaks. I would appreciate some urgent help to fix the taps today.

Looking for a licensed plumber to install aerators on 4 taps and provide a water efficiency compliance certificate for a rental property in East Hills NSW. A recent water efficiency test found the following taps above the 9L/min requirement: 1st floor ensuite mixer tap – 12 L/min 1st floor bathroom mixer tap – 12 L/min Ground floor WC mixer tap – 15 L/min Ground floor ensuite mixer tap – 14 L/min All showers and the kitchen tap already comply, so only these 4 taps need aerators installed and re-tested. Job includes: Supply/install aerators or flow restrictors Ensure taps are ≤9 L/min Provide a water efficiency report / certificate Location: East Hills NSW Should be a quick job. Please confirm you can issue the water efficiency certificate. Can provide previous test report proving only these 4 taps are not compliant.

I need a plumber to change 3 basin taps and 3 shower taps and 3 basin wastes in my parents house.

I’m looking for a licensed plumber to fix leaking shower taps at Bardwell Park. There are cold and hot handles, I tired to replace them with the universal handles, but they did not fit the spindle. The handles cannot shut off the shower properly, keep dripping. It’s an older style shower with a threaded tap spindle. I believe the tap washer or the entire spindle may need replacing. Could you please let me know: • Your call-out fee • Material fee • Estimated total cost

Assemble flat packed kitchen cupboard and place in kitchen - must bring it up stairs

We would like a garden cleanup and removal of tree stumps. Type of gardening: Garden cleanup, Hedge trimming, Other, Whipper snipping, Weeding, Lawn mowing Size of garden: 150m²-300m² Has green waste bin: Yes

We have 3 sinks and taps that need to be removed and replaced with new sinks and taps that we have already purchased.

Plumber needed for a couple of hours Connect waste for 2 vanity basins and 1 outdoor kitchen waste. Connect 1 outdoor kitchen tap. Material you required to get 3 traps needed (2 for basin, 1 for sink) and 2 x 32mm plugs needed Paying premium but need it done in next couple of hours