Find a sockets and switches installation professional in Sydney Eastern Suburbs

Change 2 extractor fans not working well. Change 2 light switches to fit requirements - Due date: Before Saturday, 25 March 2023 - Due date: Needs to be done on Friday, 24 March 2023

Change old fashioned light switches and sockets to modern ones. Is it also possible to separate the bathroom light switch and tan to two separate switches? - Due date: Flexible

Install 4 new powerpoints and 2 data sockets. Run cables and install sockets. Also relocate a tv cable. Good access to rooms via large under house garage. - Due date: Before Thursday, 15 December 2022

Qe got 2 broken light switches that beeds replacement. Bronte Road, Bronte - Due date: Flexible

I have two pendants lights which have a plug on the end of them but I’d like to connect a black on/off switch to the cord of each of them so i don’t have to turn them off to the wall every time. Happy to purchase the parts if you can confirm the correct ones. - Due date: Flexible

Need licensed electrician to look at 2x dimmer lights that aren’t dimming. Dimmable bulbs have been replaced and dimmer on the switch twists fine but dimmer still not working. Also, 1 bathroom switchboard with a loose switch to be fixed/investigated. Apartment in Edgecliff, next to train station. - Due date: Needs to be done on Tuesday, 27 September 2022

We are in the middle of remediating the house and want some electrical work done while the house is still a shell. Access to both floor and ceiling and not fussed about putting holes in the wall as plasterer will patch the whole place up next month, See attached floorplan which has listed which fittings need changing and where new ones are required to be installed. - Replace existing power outlets with clipsal x 8 (we have the sockets) - Replace existing light switches with clipsal x 2 (we have the switches) - New power outlet/sockets x 6 (we have the sockets) - TV/network & power - move existing within the same room x 2 - Bypass previous circuit breaker box - there was a circuit breaker in this room as I am assuming the plan was to have it self-contained. kitchen has been removed and will need to restore power to the room - light switch storage room. There is a light in this room but comes on when the kitchen light comes on. It needs its own switch. - Change LED strip light which is in the bathroom behind a marble wall (we have plenty spare) We are reasonably flexible with timing however want it finished by next Friday before the floor gets installed (assuming we need to go in under the floor) We have the sockets, but we need you to install them. - Due date: Before Friday, 30 September 2022

Two light switches (1 in bedroom, 1 in bathroom) still work but switch no longer “clicks” to easily stay on or off. Switch x 2 most likely needs replacing. - Due date: Flexible

I need to replace 2 infinity switches on westinghouse WLE537WA upright cooktop. Please supply price on labour only and parts and labour. Thank you - Due date: Flexible

The unit needs light switches and sockets replaced 5 in total - Due date: Flexible

need to get a a light installed into patio and a few Lights checked, switches

Replace internal floor heating thermostat and 2 bedroom light switches - Due date: Flexible

Need help to swap two Clipsal Push Button Dimmer Switches for two Clipsal Push Button Switches (non-dimming). I have the switches. Just needs installation. - Due date: Flexible

We have got new 4 switches and a power point and we need the old ones to be replaced. We live in an apartment , all points are accessible. How much could be the replacement? - Due date: Flexible

I have 6 faulty dimmer mechanisms I need replaced on existing switch plates. Switch and switch plate are still good - Due date: Flexible

I need an electrician to unhook about 6 3 point sockets and make sure power off/safe Will take about 15 min for electrician

I need an electrician to disconnect 2 light switches built into the End Panels of the wardrobes. Needs to be done this it next week

Various gang switch/sockets. See pictures. Photo 1 x4 Photo 2 x8 Photo 3 x1 Photo 4 x1 Photo 5 x1 Photo 6 - x1 : just need a plate fitted to cover hole. No connection needed as not in use. Note: replacing full unit for sockets and gang switch (not just cover plate). No new electrical wiring needed, just connection for pre existing wiring. Must be a licensed. Cheers - Due date: Before Tuesday, 21st Dec 2021

I have 2 light switches in the bathroom and want to change which lights each one turns on

Spec: 1. GPOs 1x double for Fridge. 2. 1 x single for microwave. 3. Power to dishwasher x 1 4. Replace covers on 3x existing double GPOs (I will provide new covers) 5. Power for under cabinet lighting. 6. Please also provide separate line pricing for oven and cooktop and extractor power supply including Safety Switches and RCD’s - Due date: Flexible