Find local power point installers in Sydney Eastern Suburbs

Fix existing power point Install new power point Experienced and licensed electrician required Must bring own tools and materials

Replace two fire alarms and install a 15 Amp power point (for a swimming pool heat pump)

Add two power points on skirting board on either side of existing power point

I need a qualified and licensed electrician to assist with the following items in my kitchen: 1. Disconnect old electric stove top and connect a new induction stove top, including any upgrades of the wiring / connections as needed to support the new induction top 2. Disconnect old oven and connect a new oven, including any upgrades of the wiring / connections as needed to support the new induction top 3. Add in a power / plug point connection on the wall (double powerpoint if possible). Appears to have been one there previously with existing cabling, however this may need to be redone (photos of the wall powerpoint cover and the wiring behind the wall which is in the cabinet on the other side of the wall) Items bought: - Induction top: https://www.ikea.com/au/en/p/matmaessig-induction-hob-ikea-300-black-10467267/ - Oven: https://www.thegoodguys.com.au/technika-60cm-10-function-oven-steam-bake-air-fry-to6010atb

Need two power points installed in under house cellar. Already have electricity cables running through cellar.

I need 4 x 10w wall mounted lights fitted to a cavity wall , power is located in the wall also need a surface mounted gpo put outside and the power would by fed from the bulkhead above ceiling , I will supply all the fixtures and fittings needed as well as conduit for the surface mounted power outlet

It’s only one power point (left) out of the two that’s not working. The rocker switch for that one has been a bit dodgy/floppy (no click when switching from on/off) since we moved in, but it worked fine. Until now. Photo of the switch we need is attached, although we are happy to purchase this ourselves online unless you already have one. Note: there is a light switch in the middle that is in use so it needs this switch

I have a burnt power outlet I need change.. possibly a few other things happy to start with this.

Install 4 x power points in kitchen which need to be chased in brick wall

Move a three phase power point and 14A PowerPoint, install a new three phase line and PowerPoint and 14A PowerPoint for new fan forced oven.

Looking for a licensed electrician to upgrade a single power point to a double in my apartment. ✅ Existing power point in place – just need it swapped to a double.

Need a Electrician to change excisting power point from 2 outlets to 4

Split a current cable to the oven into a power point for a microwave. Please note that the cable for the oven needs to stay the same (!!). In summery; 1. Use the oven cable to be sloppy into a power point 2. Retain the same electrical structure for the oven.

It’s only one power point (left) out of the two that’s not working. The rocker switch for that one has been a bit dodgy/floppy (no click when switching from on/off) since we moved in, but it worked fine. Until now. Photo of the switch we need is attached, although we are happy to purchase this ourselves online unless you already have one.

I need an installation of a 15amp power point.

Description: Our gas cooktop's Piezoelectric ignition mechanism is stuck in the "on" position and continuously sparking. We need an electrician to inspect and fix this issue. Additionally, we would like two power point covers replaced. Requirements: Licensed electrician Experience with gas cooktops and ignition systems Ability to replace standard power point covers

Looking for a qualified electrician to replace a broken bathroom PowerPoint with a new good quality power point suitable for bathrooms. Job is in Bondi parking available

Install a power point in wall. Parts all supplied

Electrician needed to replace a double power point and 2 light switches. Units are supplied.

Licensed electrician to install new PowerPoint on wall. Existing PowerPoint on other side of wall. Photos added showing: 1. new location of TV (which is why I need the new power point). Note there is a light switch on the right hand edge of the tv which you can just see. But no power. 2. Power point on wall behind 3. Angled photo showing power point in bedroom and and of tv cabinet on the other side.