Find experienced deck builders in East Brisbane

Build a timber deck frame ready for install of composite boards Area 8,200 x 1,250 Will need holes dug for 8 concrete footings for main bearers alongside pool and pergola, set concrete Lay bearers - 1 long length either edge Bearers widthways every 500mm Then bearers inbetween ready for boards. Materials provided and I can labour too if needed Will need a tool to notch into pergola on one side as width is 45mm out from one side to other Also another larger deck frame to build too if this one goes well. Experienced deck builders only.

I am looking for an experienced deck builder to construct a small 2m x 3m deck in a pool area. This is a "low-height" build using an adjustable pedestal system (see photos). ​The deck runs 3m wide along the pool edge and extends 2m out through the gate area. ​What I provide: ​All materials are on-site: New joists, decking boards, and screws. ​Adjustable pedestal feet (as pictured) to manage the ground levels. ​The old planks are available to use as a template if needed. ​Requirements: ​Must have experience with deck construction (specifically low-profile or pedestal systems). ​Precise cutting around the pool coping/edge is essential. ​Reliable, tidy, and brings own professional tools. ​No DIYers or beginners please; this requires a trade finish. ​Bonus: This is a "trial" project. I have a much larger decking project planned for the right person who delivers a high-quality result here.

Need someone to screw down the edges of my deck to the frame. The deck is 6 meters long and both sides need to be fixed down. It's under the railing so you'll need a right angle drill bit I think

Sand down existing deck, Fix up 3 or 4 boards and re-oil / re-stain.

Two layers of mismatched stain to be sanded back and recoated on approx. 1m2 area. Outdoor wooden deck.

New belt needs to be installed on deck of S120 John Deere Ride On Mower.

Need a belt installed on deck of John Deere s120

Install a new deck at front of house. Will provide the decking and frame. Just need to be installed. 14sqm in total. Need to build base/frame for deck.

Support beam of deck is starting to rot. Either replace or join support to current to stabilise/support.

Supply and install 5-6 decking boards on small front porch area

Deck is approx 5.8m by 3.2m. Need someone to fix loose boards, sand (floor sander fine for main deck area) and apply 2-3 coats of Cabot Aquadeck as required to get it looking half decent again. No rush or timeframe just want it done sooner not later. Job tuned round in 1.5 days last time someone took it on

We need someone who can nail the timber decking down. We will provide all the tools and assistance with cutting each board. Need approx 5 hours

Need a small deck built by certified builder. 7m by 6m. Needs to be able to supply material of composite decking

An area 5m x 2.5m along back, plus along fence side of newly built swimming pool we want decked out.

Composite deck to build at basement. Around 36sqm.

Install blinds & shade on deck. Move cupboards in kitchen.

We have a small area next to our pool that we couldn’t concrete so ideally we would deck it instead. My husband wants to just plant it out but I would like to get an indication of how much the deck would cost. I have measured and it would be approx 3m long, 1.6-1.8m wide. UPDATED: About 260mm off the ground. I would like to get a quote for labour only, we would supply materials

See picture of part that needs welding back onto mower cutting deck - will need your own tools. In offer let me know availability when you could help.

The timber deck roughly 2.4 meters high has old staircase which is part rustic. The staircase needs new replacement. I can provide with the material including, galvanised stair stingers, timber stair treads etc

Demolition of deck and subframe that is rotted and cart rubbish to tip Approx 2.5 x 3.5 metres