Find a professional staining service in Sydney Northern Beaches

Stain timber deck (Intergrain UltraDeck Amber) – North Balgowlah Description: Looking for an experienced painter or deck-staining specialist (not general landscaper) to clean and stain my outdoor timber deck. Deck is under 60 m² (Spotted Gum) and in good condition, just lightly weathered. Scope of work: Thorough deck clean and prep Allow 24 hrs drying time after wash before coating Apply 2 coats of Intergrain UltraDeck Amber (water-based satin) Use lambswool pad or professional deck applicator (no roller marks) Work must be done in ideal weather – dry, mild (10–30 °C), no rain within 24 hrs before/after Deck sits under a large tree, so please ensure covering to protect surface from falling leaves while coating and drying Protect walls, glass doors, and cladding from splatter Tradie to supply all materials and tools Finish goal: Smooth, even amber tone with a satin sheen – clean, professional look for property resale photos. Budget: Around $1,000 total (materials + labour) Please quote total cost and confirm your availability and previous deck-staining experience. Location: North Balgowlah, NSW

Back deck needs sanding and stained with Merbau deck stain (I have the stain). I can move all furniture. Requires before end October. Deck: 5.75m x 3m

Timber cold plunge (ice bath) needs to be stained with oil. All items supplies to so the job.

Decking is 13.5m (L) x 1.6m (W). Sand existing decking and apply decking stain (stain provided)

Hello! I need someone to stain (2 coats) the outdoor wood at our home. Includes driveway walls, two balconies and one jetty. 5-6 hours work. $50 per hour 1) carport steps and retaining wall 2) middle balcony 3) top balcony 4) jetty

Back patio has accumulated a lot of mildew after the winter rains. The chairs and table also look like they need a good freshen up. Some staining on the tile from pots left there. Can you help? Please let me know your hourly rate.

Sand and stain pine floors approx 100m2 Includes open plan living space, entrance and hallways. And three bedrooms all in level There is new joinery in place to work around. Looking for a natural finish to take out the yellow

See photos. Deck needs sanding back and restaining. I will supply stain.

We stained kitchen today using Feast Watson proof tint in walnut Sample was inside of door as per photo but painter did it today and way too dark Requires sand back and apply alternate colour or diluted version of same incl sealer/clearcoat

Need somebody to polish welds and tube of a Balustrade it’s satin finish stainless steel. I’ll provide all the tools all they need to do is show up and do the work.

Newly laid deck. Needs light sand and followed by stain

Clean and sand back existing deck stain. Restrain similar colour to what it was. We will pay for stain, may require a couple of days not sure

30 treads. Two staircases. Easy access. Will need to colour match to the flat floor photographed. Hardwood floor. Don’t know what it is.

I need someone experienced to put stainless steel snorkel on my ford ranger. Feel free to send me a quote in the comment section. Thanks

Fabricate as weld stainless steel balustrade on site

Need a stainless steel welder to help me on site

34sqm rectangular deck needs a sand and stain. Inspections for quote welcome.

Accidentally bleached my carpet with cleaning products. Can this be fixed, repaired ? - Due date: Flexible

30sqm deck with stairs needs a sand and stain. Inspections for quote welcome.

Preparation and staining of timber as shown in the pictures. Stain is provided. May require some sanding.Two coats of stain to be applied.