Find a professional staining service in Gold Coast

Hi need this unit floors redone lots of scratches looking for a quote thanks

Small ceiling patch (1-1.5m²) from old water leak. Leak is fixed. Plasterboard is sound, NO rot/soft sections, only peeling paint & yellow water stains. Work needed: 1. Scrape all loose paint/plaster back to solid base, clean dust 2. Fill & level with joint compound (thin coats, allow drying time) 3. Sand smooth, clean‑up dust 4. Must apply stain‑block sealer to stop yellow stain bleeding through — DO NOT SKIP 5. Two coats of matte ceiling‑white paint for blending Please provide all‑in fixed price, including labour & all materials (compound, sealer, ceiling paint, sandpaper). Advise if separate call‑out fee applies. Requires two visits: prep/filling first, then sand & paint once compound fully cured. Photos attached.

Hi, I need an experienced handyman or professional painter to complete an exterior refresh at my property in Runaway Bay. This must be a full-service quote including all labor, premium materials, and tools.Part 1: Metal Gate Painting (1 Item)• Pedestrian Gate: Lightly sand to remove aging surface, and repaint with 2 coats of premium outdoor weatherproof metal paint (matching the existing brown color).Part 2: Timber Sanding & Re-staining (6 Vertical Posts, 4 Angled Braces, 2 Handrails, 2 Ceilings)• Entry Ceilings: Lightly sand/clean and re-stain 2 timber slatted ceilings (above Main Entrance and Pedestrian Gate).• Upstairs (Balcony): Sand and re-stain 1 vertical post and 2 horizontal handrails (1 long + 1 short). Handrails must be smooth with no splinters.• Downstairs & Gate: Sand and re-stain 3 pool area posts, 2 front door posts, and 4 short gate posts. Fill any dry cracks with heavy-duty outdoor timber filler before staining.• North & South Struts: Sand and re-stain 4 angled timber struts (2 with easy access via upstairs balcony onto the tiled roof; 2 at ground level with tight access behind downpipes).Strict Material Requirements (Must be included in your offer):• Timber Stain/Oil: Must use premium brands like Sikkens (e.g., Cetol HLSe/Filter 7) or Cabot's (e.g., Aquadeck/Stain) in dark charcoal/brown to match the existing tone. (No cheap/generic brands accepted).• Gate Paint: Must use premium exterior metal paint such as Dulux (Weathermax/Metalshield) or White Knight (Rust Guard).• Others: Supply high-quality outdoor timber filler, all tools, sanders, drop sheets, and ladders.Flexible with dates. Looking forward to your all-inclusive offers based on the budget. Thank you!

Restraining of both sides of the door, including door frame Restoration of bottom of door due to weather damage.

Would like a quote for cleaning of our timber deck and staining

Rebooking task between Junio and Mark

Subject: Quote Request – Custom 316 Stainless Steel Louvered Fan Cover Replacement x2 We require a replacement for our 2x heavily rusted outdoor fan louver box. We need it fabricated in 316 Marine Grade Stainless Steel for maximum corrosion resistance. ✅ Exact Specifications: • Type: Wall-mounted louvered fan cover / vent enclosure • Material: 316 Marine Grade Stainless Steel • Size: 1150 mm Height × 1150 mm Width × 850 mm Depth • Design: Match original louver style & mounting points (see attached photos) Please provide your quote for fabrication, and separate pricing if you also supply removal & installation. We are based in surfers paradise, QLD – contact us for further details or site inspection. .Photos attached. Thanks!

Require a stainless steel spot weld repair of two 316 outlets in a stainless tub.

Weather worn area of deck and stairs. Needs restaining - I have the stain required

37.8m2 deck to be lightly sanded and restained.

I have two wooden front doors that the dog has scratched. If needs fixing, resanding and oiling/staining again

Deck sand and stain Broadbeach

Need help with window stains

Stain to match the staircase + 2 coats of clear oil. Some prep work needed to fill holes, gap, sand and mask up. Must be experienced with staining and being able to cut in properly. Will need to be done across 3 days due to drying times.

Need these 4 steps sanded and re stained

Looking for an experienced and qualified tradesperson to sand and stain a timber pool deck area. Job Details: Sand existing timber pool deck Prepare surface correctly (cleaning / prep included) Apply exterior decking stain/oil suitable for pool surrounds Ensure even, professional finish Requirements: Proven experience with timber decking restoration Own professional sanding equipment Knowledge of suitable outdoor/pool deck products Must be able to provide a tax invoice Fully insured preferred More than welcome to do an onsite quote and discuss availability.

Timber floor in high rise apartment stained from water seepage from fridge.

Looking for an experienced timber finisher to strip and re-stain my front entry on the Gold Coast. The full entry installation includes a large hardwood pivot door with horizontal glass panels, full surrounding timber frame, full-height sidelight panels on both left and right, and a full-width timber transom across the top. Currently a medium-dark brown stain and I want to go lighter — so a full strip back is required, not just a sand and re-coat. The job includes: ∙ Strip existing stain fully across both sides of the door, full frame, both sidelights, and top transom (including all glass rebates) ∙ Sand back to bare timber throughout ∙ Apply a lighter stain (colour TBC, happy to discuss) ∙ Seal with exterior-grade clear coat on all surfaces ∙ Remove and reinstall all hardware (handle, lock, smart doorbell) Please only offer if you have: ∙ Specific experience with exterior timber door and frame staining ∙ Before/after photos of similar work you can share ∙ Your own materials (or itemise them separately) Entry is covered and sheltered. Easy access both interior and exterior sides. Happy to have a quick chat before accepting. Serious offers only.

Looking for an experienced and insured painter to sand and refinish the timber cladding on the second level (front facade) of our home. The timber is weathered and requires proper preparation and a high-quality finish to restore a clean, consistent look. Scope of work - Full sand back of existing coating - Surface preparation (cleaning as required) - Apply 2+ coats of suitable exterior timber product - Achieve an even, consistent finish across all boards - Protect surrounding areas (render, windows, driveway) - Complete full clean-up after the job Access / equipment - Work is on the second storey (above carport) You must supply all required equipment: - Ladders / scaffold / platform - Sanding equipment - Drop sheets / masking materials Finish requirements - Looking to maintain a similar mid-tone timber colour (no grey/weathered finish) Open to either: - Penetrating oil with tint, or - Exterior timber stain system Please specify product and finish in your quote Requirements - Must be insured - Experience with exterior timber cladding - Attention to detail and clean workmanship - Able to complete in a single continuous job (weather permitting) Please include in your offer - Brief summary of relevant experience - Photos of similar work completed (if available) - Confirmation of insurance - Recommended product + finish - Whether your price includes materials or labour only Budget - Open to quotes for quality workmanship

Sand back deck and restain. 10m x 3m.