Find experienced local carpenters in North East Perth

Description (Attached photo) GREEN: Tall extended cabinet to match existing area. This will hold vaccum, broom, tall cleaning products. YELLOW: Will need a bench top, with 1 cabinet below on left side. As we will have a 3 door bar fridge installed to fill in the rest of the space underneath.2 strong shelves on wall to hold liquor bottles, Dome/Arch area on top) 2 Inspo pics of dome arch above.

My father in law has helped me put in panelling in the entry but think its messed up just need someone to see if it's going to work and potentially make a frame for the niche and finish the end peice of panel

Needing a corner wardrobe build in master bedroom

Task 1: Move kitchen wall cabinet up 3 inches above fridge. The cabinet sits directly above a fridge, and the gap between them is too tight. I attached a photo of the current setup. The cabinet is a two door wall unit with a white gloss finish, mounted on brackets. The job covers: removing the cabinet from the wall, drilling new fixing points 3 inches higher, and remounting the cabinet at the new height. The existing brackets should work for the new height, but bring spare wall anchors in case the holes don't line up. Please bring a drill, a stud finder, wall anchors, and a level. Task 2 : Assemble glass top dining table base and top. Description: I need a tradesperson to assemble a dining table. The base is a wooden X-frame, and the top is a glass panel still wrapped in protective covering. I attached a photo of the parts. The job covers: unwrapping the glass top, attaching the top to the wooden base using the existing center bracket and screws, and checking the table sits level once assembled.

Require a cabinet maker to measure and quote for 3 panel melamine doors under staircase. I have attached a photo of my staircase currently with nothing underneath and also attached photos of what I would like it to look like

Kitchen base cabinet and bench-top installation

Install Built-In Oven Into Cabinet I need a new oven placed into an existing cabinet. The electrical wiring has already been completed and tagged off by an electrician. The job involves: First phase: * Installing/supporting a shelf inside the cabinet for the single oven to sit on. It was an area for a double oven. * Fitting the side panels/supports as required for the cabinet fit-out. This can be done after the electrician has connected the oven. * second phase.

Several rafter connections in our roofing space have the nails withdrawing. We are seeking someone to come and repair and possibly add some support posts to stop this happening again. We are seeking the job to be completed before tennants move in this weekend! See photos of the nail withdrawal below

We are looking for someone to help with two kitchen cabinet repairs: One kitchen drawer front has broken off. We still have the front panel, but it has ripped away from the drawer, so we're not sure whether it can be repaired or needs replacing. A tall, narrow cabinet next to the oven is missing its door. The original door is no longer available, and we would like a replacement supplied and installed. Please see attached photos. We are happy for someone to come and inspect the job, take measurements, and advise on materials any weekday after 5:00 pm. Ideally, the work would be completed on Friday, 13 June, or over the weekend. Please let us know your experience with cabinet repairs and whether you can assist with sourcing the required materials. Thank you.

I have bought and built a flatpack tallboy and want to replace the top that it came with with a different timber panel so that it better suits my room. I'm looking for someone that will be able to cut the panel to size and also drill some holes. I can provide the original top to use as a template for the size and where the holes need to be drilled.

removal of timber staircase and reframe for floor and ceiling below. remove Windows and install door for new staircase location. this is for a Mezzanine office area in a commercial unit. Double bay window is showing location of new door location.

Need a handyman/cabinet installer to finish off the cabinetry surround for an existing IKEA wall cabinet installation.

Need rood carpenter to trim back overhang of carport back to level with fence line. Need tiles removed and roof cut back and tiles reinstalled.

I need someone experienced with gyprock / metal to install 2 medium standard size cabinets , floating shelves x2 in my laundry

I have a small cabinet shelf about 66cm, the marked red bit is extra that requires a cut

I have a cabinet and I would like to have a floating shelf fitted into it as show in the images. I will supply the floating shelf so just need to fix it with screws or need to adjust by cutting to fix it.

Hi, I need a skilled cabinet maker or an experienced carpenter to modify my laundry cabinetry and install a dryer. The job involves: Partial Cabinet Removal: I need to remove the right-side section of the wall cabinet to create space for a dryer. Floor-to-Ceiling Challenge: The cabinets are floor-to-ceiling and flush against the ceiling. You will need to neatly detach the right section from the ceiling/bulkhead without damaging the plaster or cornices. Shared Base Board: The bottom of the cabinets is a single continuous board across both units. I need a precision cut to separate the right section while ensuring the remaining left-side cabinet stays secure, stable, and looks professionally finished. Dryer Installation: Once the space is cleared, please wall-mount my new Haier 7kg Vented Dryer (model HDV70AWW1) in the newly created space. I have the wall-mount kit. Requirements: Please bring all necessary power tools (circular saw/multi-tool for clean cuts, stud finder, and drill). Experience with cabinetry is a must to ensure the structural integrity of the remaining cabinet. Must be mindful of the exhaust direction to avoid heat/moisture damage to the remaining cabinet. Please provide a quote if you have the right tools and experience for this type of precision work. Thank you!

piece of timber to bird cage fir timber to side of cubby fix 2 outdoor timber slat doors.

I am turning my study into a library. I want to make feature bookshelves and do up some IKEA Billy Bookcases. I'd like arches on the top of them made out of plywood so that I can then add moulding and skirting. I am hoping to have the bookshelves have a 'built in' look.

Fix timber screen door will need some cutting down. Also attach an internal slide lock and fix missing detail