Find an experienced cabinet maker in Blacktown

Need some doors hung 3 small kitchens to install all materials are on site

Hello, We are looking for a skilled handyman, joiner, or cabinet maker to perform several repairs on the main POS (Point of Sale) counter at our retail store, in Westpoint Blacktown. The Issue: - Swing Doors: Two under-counter cabinet doors are misaligned from their hinges. They move noticeably, close unevenly, and do not sit flush. - Drawers: The internal drawers do not close properly, requiring staff to use makeshift fixes to keep them shut. This likely points to an issue with the drawer runners/sliders. We need to fix only one drawer and one cupboard door. The measurements of the drawer are L 40.7 cm x W 42.7 cm x H 18.9 cm. The Job: The task is to repair and adjust the doors and drawers to restore full and proper functionality. The scope of work includes: 1. For the Doors: Assessing the hinges, then adjusting, re-securing, or replacing them as necessary to ensure both doors hang straight, are perfectly aligned, and close smoothly. 3. For the Drawers: Inspecting the drawer runners (sliders), then repairing or replacing them to ensure the drawers open and close smoothly and fully. 4. Please note: The successful contractor MUST supply any necessary replacement parts (e.g., new hinges, new drawer runners, screws). The cost for these materials must be included in your final offer. Requirements: - MUST have proven experience with commercial cabinetry repairs, including adjusting/replacing concealed hinges and drawer runners. - You must supply all your own tools AND all necessary materials (as mentioned above). Location & Timing: Location: Westpoint shopping centre, 17 Patrick St, Blacktown NSW 2148 (exact location will be provided once the task is assigned) When: The job can be completed at your earliest convenience. Please state your availability in your offer. Your offer should include all labour costs and the cost of supplying any required replacement hinges or drawer runners. Thank you.

Hi looking to make cabinet and put on stone top of 20 mm . It is to install in bathroom area

Hello, We are looking for a skilled handyman, joiner, or cabinet maker to perform several repairs on the main POS (Point of Sale) counter at our retail store, in Westpoint Blacktown. The Issue: Due to constant wear and tear, several components of our POS counter are not functioning correctly: - Swing Doors: Two under-counter cabinet doors are misaligned from their hinges. They move noticeably, close unevenly, and do not sit flush. - Drawers: The internal drawers do not close properly, requiring staff to use makeshift fixes to keep them shut. This likely points to an issue with the drawer runners/sliders. The Job: The task is to repair and adjust the doors and drawers to restore full and proper functionality. The scope of work includes: 1. For the Doors: Assessing the hinges, then adjusting, re-securing, or replacing them as necessary to ensure both doors hang straight, are perfectly aligned, and close smoothly. 3. For the Drawers: Inspecting the drawer runners (sliders), then repairing or replacing them to ensure the drawers open and close smoothly and fully. 4. Please note: The successful contractor MUST supply any necessary replacement parts (e.g., new hinges, new drawer runners, screws). The cost for these materials must be included in your final offer. Requirements: - MUST have proven experience with commercial cabinetry repairs, including adjusting/replacing concealed hinges and drawer runners. - You must supply all your own tools AND all necessary materials (as mentioned above). - Ability to work cleanly and professionally within a live retail environment. Location & Timing: Location: Westpoint shopping centre, 17 Patrick St, Blacktown NSW 2148 (exact location will be provided once the task is assigned) When: The job can be completed at your earliest convenience. Please state your availability in your offer. Your offer should include all labour costs and the cost of supplying any required replacement hinges or drawer runners. Thank you.

Fridge wont fit but need to remove one side to allow the fridge to go in. Need a carpenter or cabinet maker.

Supply and install 3 (hinged) doors cabinet/sideboard matching with existing (2nd photo). Appears to be Polyurethane material. Overall measurements as per below: Depth 400mm Height 870mm Width 1400mm Divide total length in equal 3 doors. Remove timber skirting to achieve flush finish Refer photos shown for reference.

Hi, We run a small cabinet-making business in Kings Park. We are on the look for tradesperson/handyman who has experience in cabinet joinery installation. This is an ongoing opportunity.

need a rough quote to install new cabinets, i will remove the existing one

Cabinet making and installing

Need a cabinet maker for my laundry

Need a joiner / cabinet maker to supply and install cabinet doors. 3 vanities 2x 450mm requires 2 doors in each 1x 600mm requires 2 doors White color

- Can measure and supply materials - Custom desk area - create storage in this small room and offer ideas

I need One Bathroom Drawer to be made using Blum Products. The overall size of the drawer is 342*782 mm The face of the drawer is already with me It just need the drawer and blum channels to suit the dimensions

2 built ins in a unit ,doors there but needs shelves and drawers.

Need to make some cabinets in the cupboard to increase storage.

I am looking for a skilled carpenter to complete the following tasks in my home after the 12th of July 2024: 1) Remove Existing Wardrobe Sections and install new ones: Remove sections of the current wardrobe and build a new one based on the provided template. 2) Construct a New Wardrobe in 2nd Bedroom: Build a brand new wardrobe in the second bedroom according to the provided template. 3) Install a New Partition Door: Create and install a new door for partition purposes. 4) Replace Rollers of Sliding Doors: Replace the rollers on our sliding doors of wardrobes and backyard door to ensure smooth operation. 5) Fix Shower Screen Door: Repair the shower screen door so it closes properly. Requirements: 1) All materials and tools will be supplied by the carpenter. Carpenter must provide some material options with their benefits and drawbacks for us to choose from. 2) Ensure no damage to the paint or other parts of the property. 3) Clean up all scraps and debris after the work is completed. Please refer to attached sample images. If you have experience with similar projects and can provide references, please get in touch with your quotation and availability.

Required some one to built cabinets in 2 wardrobe both are half done all ready.

I want to make a cabinet in one small space. - Due date: Flexible

Two door cabinet over refrigerator space and few glass cabinet under the kitchen bench - Due date: Flexible

Need to create cabinets in garage on 3 walls. .On two walls, the dimesions gonna be: 900mm H 400mm W 2200mm L . 3rd wall gonna hev dimesnions like: 900mm H 600mm W and 1600mm L - Due date: Flexible